EVIL ENERGY 10AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 10FT Black
- Application: AN10 braided fuel line widely used as transmission cooler line, fuel return line, fuel supply line, coolant fluid hose, engine cooler line..
- Nylon and stainless steel braided fuel line can be compatible with transmission fluid, coolant, oil, pump gas, race gas, vacuum, hydraulic fluid, diesel and fuel..
- Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
- Inside Diameter: 9/16". Outside Diameter: 0.78inch. Length: 10 Feet. Please measure before purchase!.
- EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check StockEVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)
- 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
- Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
- Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
- Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
- EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check StockRed Line 57904 Gear Oil Quart 75W90 1 Pack
- CUTTING EDGE TECHNOLOGY - Shockproof technology designed to make a big impact against big impacts.
- QUIET SMOOTH SHIFTING - V-Twin Transmission oil dampens transmission noise, reducing the notorious shifting clunk found in these gearboxes.
- IMPROVES PERFORMANCE - Transmission fluid that dramatically reduces temperature, providing thicker oil films between gear teeth and resists throw-off.
- SPECIFICALLY ENGINEERED - Gear oils designed for the latest high-revving four-stroke motocross bikes & ATVs sportbikes.
- WHY RED LINE - Established in 1979, Red Line Products perform & protect better than any on the market. No compromises.
Check Stock
Byredio 3/8 Fuel Line Braided 6AN 10ft Transmission Cooler Hose for Oil,Gas,Fuel,Hydraulic 350-1400 psi High Pressure & Tamper Resistant (8.71mm ID)
- ... ✅NYLON BRAIDED - The braided fuel line can stand-104ºF to +302 ºF/-40ºC to +150ºC, 350 PSI Working Pressure Tolerance, the fuel line has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect...
- ✅WIDE APPLICATION - The 6an fuel line specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85..
- ✅CUT THE SIZE AS YOU WANT - The 6an fuel line is 10 Feet / 3 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines, the 6an hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance..
- ✅FLEXIBILITY - The highlight of this fuel line is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability of this fuel tube makes i....
Check StockFuel Line Pliers Tweezer Set DEF Exhaust Fluid Lines Disconnect Removal Tools
- FUNCTIONS: The Oil Cooler Line Quick Disconnect Kit provides 7 different sizes tool to remove/disconnect fittings on fuel lines, heater lines, AC cooling lines and other quick disconnect couplings..
- FIT FOR VEHICLES: The AC Fuel line disconnect tools are compatible with most Ford, GM, Chrysler and Mazda models. It also fits for some other vehicles while the automatic transmission line is within the sizes..
- EASY TO USE: The compact size is easy to grasp and the angled design allows to access the hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
- WHAT YOU GET: The Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
- DURABILITY: All fuel line quick disconnect heater hose disconnect tools are made of hard plastic to secure the strength and sturdiness..
Check Stock
WISPAUSU AC Fuel Line Disconnect Tool Remover 7PCS Compatible with Ford GM Mazda More Vehicles, 1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch, Transmission Oil Cooler Line Removal Tool Quick Disconnect Tool Kit
- Why Need It: WISPAUSU 7PCS AC Line and Fuel Line Disconnect Tool Set, help you quickly remove/disconnect fittings on Fuel lines, AC cooling lines and heater lines, transmission oil cooler line and other quick disconnect couplings..
- Wide Applicability: 7 sizes of disconnect tools for various fuel lines and other quick disconnect couplings. Compatible with several Ford/ GM/ Mazda / Chrysler and more other vehicles with automatic transmission lines. (If your vehicles are not in the list please contact us and confirm).
- What You Get: The 7-Piece Fuel Line Transmission Line Removal Tool includes 7 types of opening size, 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch (Please check the Outter Diameter of your fuel/oil/AC lines)..
- Simple Operation: Made of hard plastic, resists fuels and solvents, durable and lightweight. Compact size, easy to grip and get the hard-to-reach lines. Place the notch of the tool against the line, and open the clamp with one push. Then you can get the line into the tool and disconnect..
- Worry Free Purchase: Each tool is marked with permenat lable(Size: mm and inch) for easy identification. We offer worry-free 12-month warranty and friendly after-sales services. If you have any issues please feel free to contact ....
Check StockMastercool 99961 4-Way Digital Manifold w/3-60 hoses w/ ball valves
- GM fuel Line Flare, Brake Lines and transmission 5/16 and 3/8".
- Flare/double Flare 3/16, 1/4, 5/16, 3/8 and 1/2", metric bubble Flare 4.75, 6, 8, and 10 mm, GM transmission cooling Line 3/8 and 1/2.
Check Stock
Lisle 39210 Main Fuel Line Disconnect
- ... Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines.
- FITS YOUR VEHICLE: Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
- Measure your application to ensure correct fitment.
- EASY TO USE: Each fuel tool is color-coded by size for easy identification.
- Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
- Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job for easily removal.
- BUILT TO LAST: Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
- Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released.
- PACKAGE CONTENTS: Package contains (6) fuel line pliers transmission tools – Red 5/16-inch (8mm), gold 3/8-inch (9.5mm), dark gray 1/2-inch (13mm), blue 5/8-inch (16mm), black 3/4-inch (19mm), silver 7/8-inch (22mm).
Check StockMFJ Enterprises Original MFJ-913 Balun 4 1 Current 300 Watts
- 300 Watt true current baluns/antenna center insulators that transforms 200 ohms to 50 ohms..
- Transmission Line Transformer construction using 100 ohm characteristic impedance transmission line gives flat 160-10 Meter response..
- Large low permeability ferrite cores easily handle full power..
- SO-239, stainless steel hardware with direct 14 gauge stranded copper wire connection to antenna..
- Heavy duty weather housing. Measures 4¼ x 2 inch diameter..
Check Stock
AutoXscan AC Disconnect Fuel Line Disconnect Tool Set – Fuel Line Tool Fuel Line Removal Tool 7pcs Kit 1/4-7/8 inch
- Suitable for : Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
- Measure your application to ensure correct fitment..
- Package contains (7) fuel line pliers transmission tools:1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
- AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines..
- Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
- Release the fuel line locking mechanism by listening for the slight “click” so easily to use..
- Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
- Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released..
Check Stock
20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black
- ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
- ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
- ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
- ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
- ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock
Well Control for Completions and Interventions
- BOOST THE EFFICIENCY OF ANY TRANSMISSION OIL -Enjoy improved lubricant performance with our innovative transmission oil additive. Using diamond nano-particles technology, our additive provides anti-wear and antifriction properties that are superior to plain transmission repair fluid..
- ENHANCES THE ADDITIVES IN ALL ATF FLUIDS – Enhance any manual transmission additive or transmission assembly lubricant by helping prevent the oxidation of the additives in all ATF fluids. Our product also conditions all seals and O-rings for optimized effectiveness..
- EXTENDS THE LIFE OF ALL AUTOMATIC TRANSMISSIONS – The anti-scuffing and anti-wear properties of nano-diamonds make this the perfect transmission fix for lubricants used in cars, race engines, motorcycles, and any other vehicles..
- EASY AND ECONOMICAL MAINTENCE – Enjoy an overall improved driving performance and help reduce CO2 emissions by boosting the fuel efficiency of your vehicle with our effective transmission treatment additive..
- TRUSTED QUALITY AND PERFORMANCE – All Best Line Racing products are proudly made in the USA by transmission professionals looking to increase the fuel efficiency and running power of vehicles while lowering your costs..
- Diamond Ceramic Coating Reduces the coefficient of fri....
Check Stock
3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc
- Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
- Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
- Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
- Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
- Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
- Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stock
