Best Transmission Pans - TopShopReview.com

Lisle 38780 22' Square No-Splatter Pad

22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
Porous material allows fluid to quickly pass through into funnel or pan..
Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..

Specially formulated for engines equipped with oxygen sensors.
Temperature range: -65F to 650F intermittent.
Suggested Applications: valve covers, oil pans, timing covers, water pumps, thermostat housings and transmission pans.

Resistant to oil, transmission fluid, gear oils and coolant.
For use on transmission pans and covers, axle cover plates and transfer case covers.

High performance, high temperature, silicone gasket maker.
resists oil, water, and antifreeze mixtures.
maintains long term durability and flexibility to make formed-in-place gaskets.
Temperature Range: -100°F to 650°F (-73°C to 343°C).
Suggested Applications: Use on all engines.
make gaskets for valve covers, oil pans, intake manifold end seals, water pumps, transmission pans, cam covers, and thermostat housings.

110 Volt Cord New and improved lamination process, this is excellent for pre-heating of oil pans, tanks and automatic transmission pans. Pad is secured to unit by hook/spring attachment. The etched foil design distributes heat evenly. Superior grade silicone outer shell resist oil and dirt. Pad has 360 Watts of power. Note: This does not come with hooks and springs..

Effectively replaces almost any cut gasket.
Makes reliable 'formed-in-place' gaskets that resist cracking, shrinking and migrating.
Coats pre-cut gaskets to increase reliability without fouling oxygen sensors.
Temperature range of -65 degrees fahrenheit to 500 degrees fahrenheit intermittent.
Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans.

Durable rubber barrier stops leaks in minutes.
Targets low pressure leaks in hoses, oil pans, differentials, transmission pans, as well as plastic, PVC and metal pipes.
Eliminates the need for liquid additive sealers that can swell and foul internal seals.
Seals hard-to-reach leaks without the need for disassembling or removing parts.

These Original Equipment Manufacturer (OEM) specified gaskets resist auto and shop fluids, as well as vibration.
Eight times more flexible than cork/composite gaskets.
Three times more oil resistant than conventional silicones.
Suggested Applications: Valve covers, oil pans, timing covers, transmission pans, differential covers.

Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable.
Fills gaps up to .015" and cures to a solvent-resistant seal that will not tear or decay during service.
Parts disassemble easily even after extended service and old gasket material can be removed in minutes with a simple putty knife.
Suggested Applications: Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, o-ring replacement.
Original Equipment Manufacturer (OEM) specified, non-corrosive material.

Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable.
Fills gaps up to .015" and cures to a solvent-resistant seal that will not tear or decay during service.
Parts disassemble easily even after extended service and old gasket material can be removed in minutes with a simple putty knife.
Suggested Applications: Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, o-ring replacement.

Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable.
Fills gaps up to .015" and cures to a solvent-resistant seal that will not tear or decay during service.
Parts disassemble easily even after extended service and old gasket material can be removed in minutes with a simple putty knife.
Suggested Applications: Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, o-ring replacement.
Original Equipment Manufacturer (OEM) specified, non-corrosive material.

DESIGN USE. Noncorrosive anaerobic designed primarily for use on aluminum, iron and steel flanged mating surfaces..
PREMIUM. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is out of stock..
FILLS & SEALS. Fills gaps up to 0.050" (1.27 mm) and forms a flexible, solvent-resistant seal that will not tear or decay..
EASY TO USE. Parts disassemble easily, even after extended service, and old gasket material can be removed with a putty knife..
APPLICATIONS. Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, O-ring replacement..

RELIABLE ADHESION. Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) & tolerates minor contamination by oils (e.g. motor oils, corrosion protection oils, cutting fluids)..
FLEXES WITH MOVEMENT. Adds flexibility to rigid machined flanges that move in service & eliminates the need for preformed, paper, rubber & cork gaskets..
EASILY REMOVABLE. Well suited for automotive and other applications such as water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, O-ring replacement..
CONVENIENT CURING. With primer, sets in 15m – 2hrs. Without primer, sets in 1-12hrs..
LOCTITE 515 is designed for close fitting flanged parts with gaps up to 0.25 mm (0.01 in)..