Ueevii 5.8G Point to Point Wireless Bridge CPE830&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment
- CPE830 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional..
- Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
- 1000Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 1Gbps..
- 360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
- 1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and sm....
Check StockSZRMCC Anton-Bauer Gold Mount Battery Conver to V-Mount/V-Lock Camera Adapter Plate with D-Tap Female Output
- This Anton-Bauer Gold Mount to V mount Battery Adapter Plate is a S-GP-A converter plate..
- This S-GP-A converter plate can be mounted onto camera, power station, charger or plate equipped with V Mount Plate..
- Coverter Adapter for Converting Panasonic Anton-Bauer Gold Mount battery to be a V mount battery..
- If you have a Gold-mount battery and a V mount power station, you can use S-GP-A converter plate to charge battery..
- With standard D-tap output for powering different devices,such as Camera,Camera Monitor, EVF,Wireless video transmission equipment,etc.
Check StockShorty's Skate Tool The Wench
- Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
- Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
- Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
- Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
- 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..
Check StockUeevii 5.8G Point to Point Wireless Bridge CPE028&2 * 1-Pack Wireless Bridge Bracket Mount 360°Adjustment
- CPE028 is an outdoor high power and high-performance CPE, which works at 5G frequency. It supports Point to Point and Point to Multi-Point wireless connection. The transmission speed between 2 bridges max is 300Mbps. The highest network speed that can be achieved max is 100Mbps. To achieve the CPE function, one needs to act as a receiver and the other one as a transmitter..
- Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection.
- 3KM Transmission distance: 3 km (visible unobstructed environment), actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house..
- 360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle.
- Low Interference: 5G frequency makes it have better anti-interference performance, good compatibility, and strong anti-adjacent channel i....
Check StockMishimoto MMTC-F2D-99SL Transmission Cooler Compatible With Ford 7.3 Powerstroke 1999-2003 Silver
- Direct fit for the 1999-2003 Ford 7.3L Powerstroke.
- Proven +10°F (+5.6°C) drop in transmission fluid temperature with no additional fluid pressure drop.
- 37-row stacked plate fluid cooler provides 265% increase in core volume compared the stock 9-row transmission cooler.
- No modification necessary for installation, functions with all stock equipment.
Check StockXianFeng 22100 Flywheel Locking Tool for 6.6L Duramax Engine with 36mm 3/4 Inch Wench
- Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
- Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
- Toothed pieces with screws---Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
- Forged 36mm socket---Use on the balancer bolt.Use with a 3/4" square drive wrench.
- Quality tool ---Made of CRV steel with durability, flywheel locking tool is anti-rust and corrosion-resistant.
Check StockBolaxin Flywheel Locking Tool with 36mm 3/4 Inch Wench for 6.6L Duramax Engine
- Locks Flywheel in Place When Removing Harmonic Balancer on 6.6L Duramax Engines with Allison Automatic Transmissions.
- Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
- Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation.
- Duramax 2500 / 3500 Pickups – Use toothed pieces only removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
- Duramax 4500 / 5500 Trucks -- Use toothed pieces with screws remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
Check StockWireless Backup Camera HD 1080P Bluetooth Rear View 5 Inch Split Screen Touch Key Monitor Car Truck Camper License Plate Cam System 2 Channels Waterproof Clear Night Vision DIY Guide Lines AMTIFO A6
- ► Back up camera systems wireless with 5 inch split screen can add to 2nd License plate camera or another rv backup camera.
- ► Universal backup camera for trucks with digital Signal transmission, delivers a stable image without any interference under 33ft vehicle..
- ► Jeep wrangler backup camera comes with functions including on/off guide lines, flip images mirrored/facing/horizontal flip/vertical flip..
- ► Reverse camera for car is 150 degree wide viewing angle provides you larger visible area for safety even at night..
- ► Upgraded HD 1080P back up camera systems for car provides a clear picture, which restores what you see behind your car directly..
- ►The waterproof license plate camera was upgraded that wireless can be hidden the license plate and will not block any information..
- ► We have specially updated the wireless rear view camera's motherboard and chips, which are more durable than general truck backup camera, the signal is more stable, the image is clearer, and the transmission distance is longer..
- ► AMTIFO provide 24-Hour Online Customer Service, 30-Day Money-Back Guarantee, 2 Years Warranty and Lifetime After Service Support. If you have any question or need any help, please contact us first, we'll try our best for you..
Check StockEthernet Wall Plate, HTTX White 1-Port CAT6 Wall Plate with Removable F/F RJ45 Punch Down Keystone Jack Inserts [2-Pack]
- CAT6 Ethernet Wall Plate is compatible with Cat5 and Cat5e network cables that permit data transmission for answering machine, fax, modem, caller ID and more. Punch down style keystones with color-coded terminals and dust caps supporting 110-type Punch down and termination tools.
- Standard size Cat6 wall plate with removable punch down keystone jack provides in-wall connection to wall mountable computers, phones and other network devices.
- Ethernet wall outlet includes a faceplate that meets building specifications for low combustion wall outlets with flame-resistant, UL Listed ABS plastic construction.
- HTTX wall plate with traditional design fits to any standard outlet or flush mount bracket. The wall plate is the perfect finishing touch for your home and office decorating projects. Includes matching mounting screws..
- What You Get: 2x Ethernet Wall Plate 1-Port [Includes mounting screws].
- HTTX 12-month warranty and friendly customer service..
Check StockLaptop Keyboard Typing Hands Fingers Type Computer Notebook Working Noise Clip [Sound Effect]
- 【WIred and Wireless】Equipped with ultra-fast 2.4G wireless transmission technology, this keyboard is more stable and reliable, the transmission....
- 【Mechanical gaming keyboard】104 Keys blue backlit mechanical gaming keyboard with Mechanical Feeling keyboard switches (blue switches and black....
- 【HIGH QUALITY AND RELIABLE PERFORMANCE】Ergonomic Design and High quality durable Illuminated panel and ABS construction with Plate-mounted....
- 【Energy Saving and Durable】Automatically enter sleeping mode 1-2 minutes without operation and backlights off, any key press will awaken and....
- 【STRONG COMPATIBILITY】Work perfectly for Windows xp/Vista/Win 7/Win 8/Win 10 /IBM,etc.
Check Stock9.45 Inches Induction Plate Adapter for Glass Cooktop, Stainless Steel Heat Diffuser for Electric Gas Glass Stove with Detachable Handle
- The induction plate makes it possible to use all types of pots and pans on glass cooktop stove like stainless steel, aluminium, brass, glass cookware, pressure canner, ceramics/cast iron pot or pan, moka pot. No need to buy new pots and pans..
- The top and the bottom part of the plate are made of stainless steel, the middle part is made of aluminum, allows a perfect heat transmission..
- It can diffuse the heat evenly, The heat diffuser simmer the food and improves the quality of your cooking. If you have a small size pots which the stove can not recognize it, the induction plate is a good solution..
- Color variations are normal after using the board, it will not affect the proper functioning of the board. But if there are rough bumps at the bottom of the plate, please use it carefully. Be careful that it may gets scratches and damages from the induction hob..
- The package comes with a detachable handle, it can protect your hand away from burning yourself when you using the induction plate. Besides, there is a user manual, please read it carefully before using..
Check StockDesktop Motherboard LGA 1155 USB3.0 SATA Mainboard for Intel B75 DDR3 Computer Motherboard
- [USB3.0 High-Speed Interface]: Front and rear dual USB 3.0 interface, data transmission rate is fast.
- [Compatibility]: Fully compatible with DDR3 desktop memory 1066/1333/1600/1866.
- [SATA3.0 Hard Disk Interface]: SATA3.0 high-speed hard disk interface supports SSD solid state drive high-speed transmission..
- [Nuclear HDMI HD Graphics]: HD high-performance graphics card, support VGA + HDMI dual output.
- [Important Reminder]: The color of the slot bottom plate may be different for each batch. The product is continuously optimized and upgraded, and does....
Check StockTraxxas T-Maxx 3.3: Powered 4WD Maxx Monster Truck (1/10 Scale), Red
- TRX 3.3 racing engine delivers massive power and torque to all 4 wheels to conquer any terrain at speeds up to 45mph.
- TQi 2.4GHz Transmitter with Traxxas Link wireless module, factory installed telemetry sensors, and TSM stability control.
- Tunable, sealed front and rear differentials and auto-shifting two-speed transmission.
- Ready-To-Drive with included NiMH receiver pack and EZ-Start battery, chargers, fuel-filler bottle, spare glow plug, and more!.
- Extended chassis, heavy-duty chassis braces, transmission skid plate and 6.3" Maxx all-terrain tires on mirror-chrome 3.8" Hurricane wheels.
Check Stock