Categories

Best Transmission Power Control

DDMALL Streaming Encoder, H.265 H.264 HDMI Video Encoder for Live Streaming 1080p/1080i, Support SRT, HLS, RTMP, RTMPS, RTSP, UDP, TCP, Model HEV-2K

  • ... wonderful for the live streaming applications that require long working time, frequent move, or tiny installation space.
  • 【Remote Control & Stream on Internet】support DDNS.
  • you can easily control the IP encoder via domain remotely on public Internet and setup video transmission without any third-party live platform get involved.
  • 【Transmission with Less than 80ms Latency】video transmission with less than 80ms delay when pairing with DDMALL video decoder HDD-20 with ddmall low latency transmission technology. It is unrivaled amazing for the streaming applications when low latency tops all consideration.
  • 【Versatile Features & Robust Performance】simultaneously go live to up to 4 platforms, compatible with YouTube, Facebook, Twitch and more.
  • allow to modify OSD setting in real time during the streaming, and preview the HDMI input video status via web UI.
  • stream outputs at up to 16Mbps in 1080p with HEVC compression.
  • support protocols like SRT, HLS, RTMP, RTMPS, RTSP, RTP, TCP, UDP, TS, Multicast, Unicast.
Check Stock

Electric Skateboards,1800W Dual Motors with Remote Control,Top Speed 25MPH,17 Miles Range, Longboard with Belt Drive System,3 Speeds Adjustment,Electric Skateboard for Adults and Youth

  • ...High power output] - Dual drive motor design, each motor provides the maximum output power of 900W. 1800W output power can make the Electric skateboard load up to 330 pounds, climb a 25 degree slope, and make the maximum speed reach 40KM/H（25mph）.
  • [High efficiency belt transmission system] - The rubber fiber belt can support higher speed and match higher output power, at the same time, The E-board belt transmission can reduce the transmission resistance and avoid the heat generation of gear friction of traditional electric longboardboard.
  • [Multifunctional - 2.4G wireless remote control] - E-skateboard remote provides travel and brake control, and supports forward and reverse, high, medium and low speed adjustment at the same time. In addition, the wireless remote control has the functions of signal strength display, E-skateboard power remaining display and low power display, making play more intuitive and convenient..
  • [Sufficient battery energy] - 30 Li-ion high-quality cells are used. According to the test, the effective capacity of the battery reaches 7.5AH. Li-ion battery provides long working time. The maximum drivi....
Check Stock

Godox 2X TT600 HSS 2.4G Wireless Master/Slaver Flash Speedlite & Receiver Godox X2T-N Remote Trigger Transmitter Kit Built-in Godox X System Compatible for Nikon Cameras

  • 【HSS Multi Flash Solution】2X Godox TT600 camera flash combined with Godox X2T-N adopts Godox wireless X system and 2.4G ratio transmission, which can realize High Speed Sync with Nikon cameras,Max speed up to 1/8000s. Particularly convenient while using the aperture to fill flash on portrait preferentially.Perfect fit for studio multi position /perspective flash solution!.
  • 【Excellent performance】Faster recycle time: 0.1-2.6s recycling time at full power (with Ni-MH batteries)approx.230 full power flashes (with2500mA Ni-MH batteries),provide enough flash times for your shooting. GN60 (m ISO 100) high guide number, 1/300s - 1/20000s short flash duration, 5600±200K stable color temperature..
  • 【Compatibility】Godox TT600 flash Speedlite can compatible with most brands cameras such as Nikon Nikon Pentax Olympus Fujifilm Panasonic and other digital cameras with standard hot shoe. Both Optic Transmission and 2.4G Radio Transmission available, offers more stable signal, farther distance, wider range of application, less power consumption, less affected by the obstacle..
  • 【Upgraded Bluetooth Connection】Godox X2 series flash trigger built-in Bluetooth for APP Control,You can connect the X2T-N to your Phone or Tablet via Bluetooth after download and ....
Check Stock

AViPAS AV-1081W 10x Full HD HDMI PTZ Camera with IP Live Streaming - White

  • 【Support NDI|HX, POE】Comes with NDI interface transmission protocol, with low-latency video and audio transmission, satisfies the needs of studios and on-site multi-camera video production. It supports PoE (Power over Ethernet), just one cable can be used for power, video/audio streaming and control..
  • 【1080P 60 and 20X Zoom】The high resolution 1080P@60fps, outstanding color reproduction, 20X zoom delivers premium optics and life-like video to create the experience of sitting together in the same room, even if you are a thousand miles away..
  • 【Low Light Correction, Auto Focus】The low-light performance technology can automatically adjust the brightness level. Every moment can be seen clearly even in dark or back light condition. Take close-ups on characters, details, and there is no need to worry about blurring your image when you're speaking..
  • 【H.264&H.265 Encoding, 255 Preset Positions】Supports H.264&H.265 video compression, which makes motion video more fluent and clear under low bandwidth conditions. 10 preset positions by IR remote controller，that can save pan, tilt, and zoom settings, and smoothly transitions between them at the touch of a button..
  • 【Multi Ways to Control】You can with the hand-held remote, remote location with WBE....
Check Stock

RadioShack Advanced 3-Station/3-Channel FM Wireless Intercom (43-3105)

  • Lockable talk button to monitor another room with confidence.
  • FM circuitry provides clear, reliable reception and transmission.
  • 3 Channels( A-200KHz, B-270KHz, C-230KHZ).
Check Stock

Yahboom 4 Port USB 3.0 Hub for Raspberry Pi Jetson Nano ROS Robot, Compatible with USB 3.0/2.0/1.1 Driver-Free Plug&Play, Onboard External USB-A，5V (Micro-USB)，9~24V Power Port, for High-Power Device

  • VL817 main control chip -- USB3.0 HUB expansion board aims to solve the problems of insufficient USB interface on the main board and insufficient power supply caused by the increase of USB peripherals.Equipped with VL817 main control chip scheme, the main control board performance is stable and the transmission is stable and safe. It uses USB3.0 communication interface and HUB chip expand 4 USB interfaces to ensure high-speed data transmission of the interface..
  • 1 to 4 data extension -- The expansion efficiency of the four ports is doubled and Each USB device has an independent indicator light. Built in over current protection, short circuit protection and power reverse connection protection circuit to ensure the safe use of USB devices..
  • Support wide voltage external power supply -- In addition to the USB-A standard data interface power supply, this product also supports 5V (micro-USB), 9~24V (DC interface/XH2.54 socket) wide-voltage external power supply. Even if multiple high-power peripherals are connected at the same time, the stability of power supply and signal transmission can be guaranteed..
  • Support equipment -- Support ROS robot / car, Raspberry Pi / Jetson series board, PC, other boards, industrial computer, etc. Compatible with win7 / 8 / 10....
Check Stock

85401-201 Edge Evolution CTS3 - 50 State Legal

  • Change 5 power levels on-the-fly using +/- cruise control buttons.
  • Connects directly to ECU in engine compartment providing instant power.
  • Built-in throttle sensitivity control for improved throttle response.
  • High-idle user settings to adjust RPM during idle.
  • Transmission slip backdown power will decrease if slip is detected.
Check Stock

Godox 2X TT600 High Speed Sync 2.4G GN60 Camera Flash Speedlite Speedlight with Godox X2T-N Wireless Remote Trigger Transmitter Compatible for Nikon Camera & 2X Diffusers & 2X Filters & USB LED

  • Godox TT600 flash Speedlite adopts Godox wireless X-system, with build-in 2.4G wireless transmission, it can be used with Godox AD360II-C/AD360II-N flash Speedlite , TT685C/TT685N flash Speedlite ,V860IIN/ V860IIC Speedlite ,X1T-C/X1T-N/X2T-C/X2T-N/XPro-C/XPro-N trigger and other devices that with wireless control system. When used with Godox X1/X2/Xpro TTL wireless Transmitter trigger, it can realize remote control, high speed sync and more functions, make your shooting simpler and easier..
  • Godox TT600 Speedlight can compatible with most brands cameras such as Canon Nikon Pentax Olympus Fujifilm Panasonic and other digital cameras with standard hot shoe. It's equipped with optic transmission and 2.4G wireless transmission, offers you an even illumination and stable power output, giving you more outstanding light effect..
  • Build-in 2.4G wireless transmission with all-in-one functions and 100 meters further transmission, to offer you a stable output and creative light effect.Come with 2xTT600 flash Speedlite, 2xDiffuser, 2xFilters and Godox X2T-N wireless Trigger Transmitter is Compatible for Nikon cameras..
  • Superior performance: More flash times, approx.230 full power flashes (using 2500mA Ni-MH batteries), provide enough flash times for your shooting. F....
Check Stock

TP-Link AX5400 WiFi 6 Router Archer AX73 - Dual Band Gigabit Wireless Internet Router High-Speed ax Router for Streaming Long Range Coverage Renewed

  • Built in 9dBi 2x2 dual polarized directional MIMO antenna.
  • Adjustable transmission Power from 0 to 27dBm/500mW. Power Consumption: 10.5 Watts Max, Note: When deployed using Passive PoE, the power drawn from....
  • System level optimizations for more than 5km long-range wireless transmission (only for paired Point-to-Point or Point-to-MultiPoint transmission).
  • TP Link Pharos tdma (Time Division Multiple Access) technology improves product Performance in throughput, Capacity and latency Performance.
  • Centralized management system Pharos Control.
Check Stock

BLACK+DECKER String Trimmer, 6.5-Amp, 14-Inch (GH900)

  • The 6.5 amp motor and POWERDRIVE Transmission of edger/trimmer provide maximum performance when trimming through the toughest weeds, grass and overgrowth.
  • The AUTOMATIC FEED SPOOL (AFS) of the grass cutter automatically feeds trimmer line when needed with no bumping required.
  • 2-in-1 Trim or Edge with wheeled edge guide - just rotate to convert from lawn trimmer to wheeled edger.
  • Lightweight ergonomic design with adjustable height and pivoting handle positions gives maximum comfort and control.
  • Cord retention system prevents accidental cord disconnection.
  • AFS automatic feed system ensures continual work without bumping or having to stop.
  • Power Drive Transmission prevents bogging down.
  • Lightweight ergonomic design with adjustable height and pivoting handle.
  • The 6.5 amp motor and high torque transmission provide maximum performance.
Check Stock

Godox 2X TT600 High Speed Sync 2.4G GN60 Master Slave Off Flash Speedlite Speedlight with Godox X2T-C Wireless Remote Trigger Transmitter Compatible for Canon Cameras & 2x Diffusers,2x Filters,USB LED

  • Godox TT600 flash Speedlite adopts Godox wireless X-system, with build-in 2.4G wireless transmission, it can be used with Godox AD360II-C/AD360II-N flash Speedlite , TT685C/TT685N flash Speedlite ,V860IIN/ V860IIC Speedlite ,X1T-C/X1T-N/X2T-C/X2T-N/XPro-C/XPro-N trigger and other devices that with wireless control system. When used with Godox X1/X2/Xpro TTL wireless Transmitter trigger, it can realize remote control, high speed sync and more functions, make your shooting simpler and easier.
  • Godox TT600 speedlight can compatible with most brands cameras such as compatible with Canon Nikon Pentax Olympus Fujifilm Panasonic and other digital cameras with standard hot shoe. It's equipped with optic transmission and 2.4G wireless transmission, offers you an even illumination and stable power output, giving you more outstanding light effect..
  • Build-in 2.4G wireless transmission with all-in-one functions and 100 meters further transmission, to offer you a stable output and creative light effect.Come with 2xTT600 flash Speedlites , 2xDiffusers ,2xFilters and Godox X2T-C wireless Trigger Transmitter is Compatible for Canon EOS series cameras..
  • Superior performance: More flash times, approx.230 full power flashes (using 2500mA Ni-MH batteries), provide enough fla....
Check Stock

Crazy Sales CNC Lathe Controller, Numerical Control System, High Precision for Program Editing Program Reading(Four axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock

Low Noise CNC Lathe Controller, Simple Operation Numerical Control System, for Program Editing Program Reading(Dual axis)

  • You can directly use the USB cable to power the system, which is convenient for the transmission of the boot screen and the program, learning and operation.
  • Isolated IO port means that with input and output ports isolated from the system, the output port capacity can be up to 1A.
  • Direct output terminal interface on the back reduces the transfer board, the terminals on the back can be directly wired, clear and convenient, which saves costs.
  • With 20 control commands, external manual supports control motor CW /CCW, start, pause, alarm, emergency stop, etc..
  • Supports automatic operation including dry running and single-step running, CNC lathe controller 's manual operation including motor CW /CCW, back to program 0, back to mechanical 0 and output control..
Check Stock