Categories

Best Transmission Torque Converter Clutch

MOOSUN GO-KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420

  • ...ce: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"..
  • 【Special function】This clutch will help you get more power out of your small engine by reducing engine load, A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration..
  • 【Go Kart Torque Converter Kit comes with】1 x 3/4" Driver Pulley.
  • 1 x 10 Tooth Sprocket for #40/41/420 Chain.
  • 1 x 12 Tooth Sprocket for #35 Chain(Chain not included).
  • 1 x Full Mounting Hardware. Note This is not made by Comet.
Check Stock

30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4' Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589

  • 【30 Series Torque Converter and Go Kart Drive Belt】 ：New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4″ Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589..
  • 【Torque Converter】：This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series..
  • 【Wide Use–torque converter 3/4】: Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc..
  • 【Go Kart Drive Belt】: 30 Series Go Kart Drive Belt torque converter belt Replaces For manco 5959/comet 203589 murray 12-8487 baja Motorsports BB65-395 ken-Bar 300-009 255-299 rotary 8487. Width: 0.4″, Length: 27-1/32″..
  • 【Wide Use–go kart clutch belt】: The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley ne....
Check Stock

VEVOR 212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40 or 41 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter

  • FOR 212CC 2HP-7HP GO KART TORQUE CONVERTER: This go-kart torque converter clutch kit is made of high-quality iron and aluminum materials, lightweight, sturdy and durable.
  • it can reduce the engine load and get more power..
  • 30 SERIES GO KART CLUTCH KIT: This kart torque converter has a 3/4″ and a 5/8″ drive clutch, suitable for all engines with 3/4 “straight crankshaft.The 3/4″ drive clutch contains a 10 tooth sprocket for # 40/41 chains.The Belt length: 70.5cm / 27.76″, Outside circumference: 27″（68.8cm / 27″), Width is 3/4”.（1.9cm / 0.75″). Center to Center of driver and driven: 6.7″（17cm / 6.7″)..
  • UNIT REPLACES: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.Replaces for Comet Manco Go Karts..
  • COMPLETE ACCESSORIES: The torque converter clutch includes： 1x 3/4″ drive clutch； 1x 5/8″ drive clutch； 1 x Plastic Assy Cover；1 x Aluminum Mounting Plate；1 x Drive Belt； 1 x 10 Tooth Sprocket for #40/41/420 Chain； full mounting hardware. Fully equipped, worry-free installation..
Check Stock

MOOSUN 30 Series Torque Converter Driver Clutch 3/4' Bore Go Kart for Comet 219552 5957

  • This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a 3/4″ Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts. Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers..
  • Replacement for Go Karts 30 series Engine Comet Manco, 3/4″ bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP.
  • Featuring 6″ diameter with 3/4″ Bore, 3/16″ Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine workmanship, this clutch can function well exactly as same as the original one..
  • This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help you get more power out of your small engine by reducing engine load..
  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is the combination of elegance and easy to use, firmly and securely, guaranteeing the safety of your car..
Check Stock

Replacement Value Drive Shaft Center Support Compatible with Ford

  • Prevents overheating, reducing elevated operating temperatures up to 40 degrees Farenheit - Optimizes total transmission performance.
  • Eliminates transmission fluid foaming and oxidation and reduces wear throughout the transmission.
  • Eliminates clutch chatter and torque converter shudder.
  • Softens and modifies harsh shifts making them quicker in duration.
  • Extends fluid life / Raises the thermal and oxidative stability of the fluid.
  • Only protectant that increases the fluid’s ability to transfer heat / Protects new seals and permanently restores older seals to a like-new condition, without adverse side effects.
Check Stock

LUBEGARD Automatic Transmission Fluid ATF Synthetic Additive Red 60902 12 pack

  • Prevents overheating, reducing elevated operating temperatures up to 40 degrees Farenheit - Optimizes total transmission performance.
  • Eliminates transmission fluid foaming and oxidation and reduces wear throughout the transmission.
  • Eliminates clutch chatter and torque converter shudder.
  • Softens and modifies harsh shifts making them quicker in duration.
  • Extends fluid life / Raises the thermal and oxidative stability of the fluid.
  • Only protectant that increases the fluid's ability to transfer heat / Protects new seals and permanently restores older seals to a like-new condition, without adverse side effects.
Check Stock

New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC 3/4 Bore Max Torque

  • This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series. It fits all engines with a....
  • Replacement for Go Karts 30 series Engine Comet Manco, 3/4" bore designed for 6.5hp 212CC engines. Recommended engine: 2HP-8HP.
  • Featuring 6" diameter with 3/4" Bore, 3/16" Key way. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch. With fine....
  • This driver clutch is designed to work with a belt and driven pulley assembly. It is produced by the sophisticated technology. This clutch will help....
  • Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation. It is....
Check Stock

LUBEGARD Lube Gard Automatic Transmission Fluid ATF Synthetic Additive Red 60902 3 pack

  • Prevents overheating, reducing elevated operating temperatures up to 40 degrees Farenheit – Optimizes total transmission performance.
  • Eliminates transmission fluid foaming and oxidation and reduces wear throughout the transmission.
  • Eliminates clutch chatter and torque converter shudder.
  • Softens and modifies harsh shifts making them quicker in duration.
  • Extends fluid life / Raises the thermal and oxidative stability of the fluid.
  • Only protectant that increases the fluid’s ability to transfer heat / Protects new seals and permanently restores older seals to a like-new condition, without adverse side effects.
Check Stock

LUBEGARD Lube Gard Automatic Transmission Fluid ATF Synthetic Additive Red 60902 6 pack

  • Prevents overheating, reducing elevated operating temperatures up to 40 degrees Farenheit – Optimizes total transmission performance.
  • Eliminates transmission fluid foaming and oxidation and reduces wear throughout the transmission.
  • Eliminates clutch chatter and torque converter shudder.
  • Softens and modifies harsh shifts making them quicker in duration.
  • Extends fluid life / Raises the thermal and oxidative stability of the fluid.
  • Only protectant that increases the fluid’s ability to transfer heat / Protects new seals and permanently restores older seals to a like-new condition, without adverse side effects.
Check Stock

Lubegard 62005 M-V ATF Supplement 10 oz.

  • Enhances DEXRON III/ MERCON ATF to perform like a MERCON V ATF, Eliminating the need for MERCON V ATF.
  • Prevents overheating, reducing elevated operating temperatures up to 40 degrees Farenheit, Dramatically reduces friction and tightens the shift cycle....
  • Eliminates transmission fluid foaming and oxidation, Optimizes total transmission performance, Extends fluid life.
  • Eliminates clutch chatter and torque converter shudder, Eliminates objectionable noises during shifts, Softens and modifies harsh shifts.
  • Keeps valves and governors free and frees stuck valves in valve bodies, Superior seal compatibility and conditioning, Only protectant that increases....
Check Stock

Mophorn Torque Converter CVT 2HP-7HP 3/4' Go Kart Clutch 212CC 30 Series Mini Bike 10T #40 41 Chain and 12T #35 Replacement Set TAV2 30-75 218353A Manco CVT Clutch Small Engine Drive Belt

  • Modified TAV2/30 Series: Our go-kart torque converter is the latest TAV2/30 asymmetrical series. The asymmetrical type system can reduce engine load and gain more power to bring your off-road machine back to life..
  • Updated Durable Belt: The new type of belt, go-kart asymmetrical belt 669, is one of the highlights for our torque converter for go-karts. Using this excellent elastic belt properly can improve the life span of your torque converter..
  • Quality Drive Clutch: We have a 3/4” Driver Pulley and a 5/8” bore driven pulley. They are made of aluminum and steel. And it also can fit for 4-8 hp small torque converter systems..
  • Vehicle Fitment: The torque converter is compatible with 3/4″ & 5/8″ straight crankshaft. You can usually use it on 4-8 hp go-karts and motorbikes..
  • Full Accessories: Our torque converter clutch has full accessories: 1 x 3/4″ driver pulley. 1 x 5/8″ bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware..
Check Stock

LUBEGARD Highly Friction Modified Automatic Transmission Protect Black 3 pack

  • Converts DEXRON II, III / MERCON ATF into a Highly Friction Modified ATF - Transmissions perform more efficiently at lower operating temperatures.
  • Anti-chatter in clutch packs (allow penetration overnight for maximum benefit), Anti-shudder with converter clutches (allow penetration overnight for maximum benefit).
  • Prevents overheating, Assists in freeing hung-up governors, Keeps valves free.
  • Provides for smoother shifting and reduces drive train power losses, Helps modify harsh shifts and makes them quicker in duration.
  • Maintains proper ATF viscosity in torque converters, Inhibits transmission fluid foaming and oxidation, thereby extending fluid life and Reduces transmission wear.
Check Stock

BLACKHORSE-RACING 30 Series Bore GO Kart CVT Torque Converter 3/4' Bore 6' Diameter Driven Asymmetric Go Kart Mini Bike + 5/8'' Driven Clutch Comet Kit + 725 Belt

  • ▲5/8″ Clutch 6″ Driven 30 Series Torque Converter: Part Number(Comet 219457a),6″ Diameter, 5/8″ Shaft Bore, 8hp Max.
  • ▲30 Series Torque Converter Driver Clutch, 3/4″ Bore, Replaces Comet 219552, 5957.
  • ▲ Replace Part Number: Comet 219552, Manco 5957, Yerf Dog Q43201W.
  • ▲ Perfect replacement driver clutch for small engines with up to 7 HP,Fitment: Mini Bike, Go Kart, Lawnmower And Many More.
  • ▲ Brand new high quality 30 series asymmetrical driven clutch with 3/16” key way and 3/4” ID hole..
Check Stock