Categories

Best Transmitter Modules

ALMOCN 4 Set 433MHz RF Wireless Transmitter and Receiver Kit High Frequency Super Regenerative Transceiver Module for Arduino Raspberry pi

  • Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor. The....
  • Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that....
  • Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high....
  • Frequency used to receive, decode and oscillation resistor should match with the transmitter..
  • Application:Usually used for remote control systems, such as Remote control rolling gates, smart car, smart home, etc..
Check Stock

Bluetooth / 802.15.1 Development Tools Adafruit Feather M0 Bluefruit LE

  • Works with all of Adafruit's three basic 315MHz RF receiver modules.
  • Only a transmitter, no receiver module included.
Check Stock

2 Pieces Digital FM Transmitter Module Stereo FM Transmitter DSP PLL 76.0 -108.0MHz Stereo Frequency Modulation with LCD Display Line/USB/Mic Input, DC 3.0V - 5.0V

  • Good performance: thanks to the DSP and PLL technology, these multi-functional stereo FM transmitter modules can provide you with quality stereo.
  • Practical design: the FM transmitter module has a blue backlit LCD display, allowing you to clearly see the value in a dark environment.
  • The power consumption is extremely low, and noise interference is small.
  • Suitable for: this digital FM transmitter supports line/USB/mic channel input, its transmitting frequency range is 76.0~108.0 MHz, and the frequency response range is from 50 Hz to 18 KHz.
  • Frequency adjustment stepping is 0.1 MHz/ times when short press the key and 1.0 MHz/ times for long press.
  • Wide uses: the digital FM transmitter module can be applied to FM wireless, USB PC broadcast, maternal and child monitoring, wireless microphone and much more.
  • Warm notice: please confirm whether the power polarity and power voltage are correct before turning on the power.
  • If the input voltage exceeds 5V or the positive and negative poles of the power supply are connected reversely, it may cause permanent destroy to the module.
  • Do not touch the components on the back of the module while working, so as not to affect the normal operation of the module.
Check Stock

Crimestopper RS7-G5 Cool Start 2-Way Remote Start System

  • Universal on all types of vehicles, especially those with larger ignition wires with high current ignition switches.
  • manual transmission operation, dome light supervision, horn honk output.
  • Rapid response 2-way and 1-way transmitters (instant lock and unlock like the factory system).
  • 2-way twin data ports to accommodate both Fortin and ADS data modules.
  • New style, 2-way transmitter with brushed aluminum and titanium finish, includes standard USB and wall charger for LCD pager.
  • includes "sidekick" non-paging remote with (2) vehicle operation.
  • LED changes color to indicate vehicle number 1 or 2.
  • Out-of-range notification on LCD pager as well as remote start run time countdown read-out.
  • real time confirmation of lock, unlock and trunk pop.
  • Trunk pop output standard, additional auxiliary outputs available with data module.
  • includes remote panic, silent lock and unlock through remote.
Check Stock

Raguso AC Current Transducer, Small Compact Simple Installation AC Current Transmitter Widely Applicable for Home for Industry for Indoor

  • High-quality material: The AC current transmitter is made of high-quality ABS material, which is strong and durable..
  • High accuracy: professional design of transmitter and receiver modules, mutual inductance current monitoring, high current detection accuracy, safe isolation of input and output..
  • Self-powered: The current sensor clip is self-powered, no external power supply is required, and it is easy to use..
  • Withstand voltage: The current sensor relay adopts a straight-through structure design, and the isolation withstand voltage is up to 2000V..
  • Application: AC current sensor is suitable for AC current measurement and monitoring, AC motor overload protection, electronic switch of automatic control system, etc..
Check Stock

Spektrum AR630 6 Channel AS3X Safe Receiver, SPMAR630 , Black

  • Antenna-less designed for easy installation, and increase performance.
  • Built in AS3X Stabilization System with SAFE flight envelope protection.
  • AS3X and SAFE set up through forward programming directly from your Spektrum transmitter.
  • Ready to use with Spektrum Smart ESC for one-wire telemetry data without the need of modules, links and wires.
  • DSMX protocol receiver with DSM2 backwards compatibility.
Check Stock

Spektrum AR10360T DSMX 10-Channel AS3X & Safe Telemetry Receiver, SPMAR10360T

  • Antenna-less designed for easy installation, and increase performance.
  • Built in AS3X Stabilization System with SAFE flight envelope protection.
  • AS3X and SAFE set up through forward programming directly from your Spektrum transmitter.
  • Ready to use with Spektrum Smart ESC for one-wire telemetry data without the need of modules, links and wires.
  • DSMX protocol receiver with DSM2 backwards compatibility.
Check Stock

Oiyagai 3pcs 433MHz RF Wireless Transmitter and Receiver Module Kit for Arduino/Arm/McU/Raspberry pi (433MHz)

  • 3 x Transmitter module (433MHz) & 3 x Receiver module(433Mhz).
  • These modules are used for projects when you need to communicate wirelessly between 2 devices.
  • It is possible to increase the range by adding a small length of cable which the device will use as an aerial..
  • VCC voltage module operating voltage and good power filtering.
  • Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source.
Check Stock

Steelman Pro Bluetooth ChassisEAR Auto Diagnostics Kit, Electronic Stethoscope, Vibration and Noise Sensor Clamps, USB Bluetooth Dongle for PCs, Headphones, Software

  • NO WIRES - Bluetooth connected transmitters attach to clamps and wirelessly transmits data to a connected device.
  • 4 INDEPENDENT SENSORS - Kit includes 4 vibration and noise sensor clamps and 4 Bluetooth transmitters with a set of color coded silicone rubber boots.
  • STETHOSCOPE PROBE - Aluminum probe works with a Bluetooth transmitter as an electronic stethoscope and features a detachable sound wand.
  • USB BLUETOOTH DONGLE - Includes a USB Bluetooth dongle for use with laptop PCs that do not have built-in Bluetooth capability.
  • MULTIFUNCTION DOCK - Docking station charges Bluetooth modules and includes storage compartments for clamps, sound wand, and ties.
  • PADDED HEADPHONES - Comfort-fit padded headphones provide high-quality sound reproduction for diagnosing detected noises.
Check Stock

Code Alarm CRCX3 2-Button Replacement Transmitter Remote 314MHz FCC ELVATKC

  • Code Alarm, Chapman, and other compatible 2 button 314MHz replacement transmitter remote (Control modules with FCC ID: GOH-052-RMTPL, GOH-3YK-BTPRX, GOH-717-JLK).
  • FCC ID: ELVATKC (Replacement for GOH-M24, GOH-M41-014, GOH-MM6-101890).
  • Programmable to the following models: ALLPRO2500, Autobahn, C-350, Chapman-400, Chapman-450, Chapman-500, Chapman-650, CSM2.5, ELITE1100, ELITE1500, ELITE2000SE, ELITE4500, ELITE911, ELITE950, EVS, EVSII, MIRAGE4500, MIRAGE9000, NIGHTHAWK4.0, PRO100, PRO1000, PRO200, PRO3000, PRO3500, PRO750, RCS2, RKE1, SCORPION600, SURESTARTSE, SURESTARTSE433, VSS-200, VSS-250, VSS-350, XTPLUS4.0.
  • Note: Replacement remote you will receive will look slightly different than pictured due to manufacturer changes beyond our control, but will still work and program the same (button configurations can vary on this remote).
  • Note: Will need to use the system's valet switch (programming/override button) to perform the programming procedure, but on some models it is possible to perform programming without the valet switch (access to the receiver under the dash is required).
Check Stock

Magnetic Game Controller Necklaces, Matching Necklace for Couples, Best Friend Necklace, Friendship Necklace (White+Gold)

  • Fully modular professional gamepad .Box Contents : 1 x ESWAP X PRO CONTROLLER gamepad, 2 x interchangeable mini-stick modules, 2 x interchangeable grip modules, 2 x interchangeable triggers, 1 x interchangeable four-direction D-pad module 2 x additional mini-stick caps, 1 x power cable, 1 x screwdriver for removing the modules, 1 x small storage bag for screwdriver and cable, Quick start guide and warranty information”.
  • New next-generation (NXG) mini-sticks: a longer lifespan, and greater precision.
  • T-MOD technology and Hot Swap feature lets you swap a module with any other — at any point in a game.
  • Extremely high-precision modules and action buttons, with minimal response times.
  • Box Contents : 1 x ESWAP X PRO CONTROLLER gamepad, 2 x interchangeable mini-stick modules, 2 x interchangeable grip modules, 2 x interchangeable triggers, 1 x interchangeable four-direction D-pad module 2 x additional mini-stick caps, 1 x power cable, 1 x screwdriver for removing the modules, 1 x small storage bag for screwdriver and cable, Quick start guide and warranty information”.
Check Stock

SIIG Ultra Compact Wireless IR Remote Control Extender Repeater Kit – 200M (CE-RC0014-S1)

  • ✅ COMPLETE SIGNAL COVERAGE: Wireless RF signals operate between the transmitter and receiver, allowing you to move around freely and still be in control of your A/V or IR-enabled equipment remotely up to 200 meters away (656 feet), depending on surrounding obstructions. 2 power adapters included..
  • ✅ WIDE COMPATABILITY: IR receiving module recognizes IR signal frequency ranges from 20 to 60 KHz, compatible with most IR-equipped devices such as DVD players, cable boxes, satellite receivers, audio/Hi-Fi stereo systems, etc..
  • ✅ INSTANT TRANSMISSION: Highly sensitive modules provide real-time signal transmission without delay.
  • built-in LED indicator illuminates when the signal is received for easy status recognition.
  • ✅ HASSLE-FREE INSTALLATION: Ultra-compact design with bundled infrared extension cables allow easy and flexible placement. Please keep in mind to place the extension cables in line-of-sight of the source IR sensor no further than 2 inches for best signal..
  • ✅ NOTE: We recommend using the kit without the IR extension cables. Simply placing the Receiver Unit in line-of-sight with source device can support longer range. Only use the extension cable if needed. Contact us with any questions..
Check Stock

SparkFun XBee Explorer Dongle - Red

  • UART communication board, XBee interface, USB interface.
  • XBee USB Adapter is a UART communication board which supports XBee connectivity, features UART interface, USB interface, and onboard buttons/LEDs,....
  • Test XBee modules: onboard buttons/LEDs for easy testing. Program/Configure XBee modules: make it easy to program/configure the XBee modules....
  • USB to UART module: features CP2102, provides UART interface and power output interface, connect it to your system easily.
  • Note:The XBee/ZigBee modules and Core2530 (B) in the photos are NOT included..
Check Stock