Categories

Best Traxxas Slash Monster Energy

Black Chassis Bundle for Traxxas Slash/Raptor 2WD, Convert a Stampede, Rustler or Bandit to a Short Course SCT Truck, Custom Build a Drag Car, Dirt Oval Racer, Sand Buggy, or Monster Truck 5822

  • Stock Chassis kit for Traxxas 2WD Slash or Raptor.
  • Includes everything seen in pictures - 2WD Slash bumpers, chassis, skid plates, nerf bars, battery hold down, steering linkage, camber links, fiberglass tie bar, suspension arms, steering arms, caster blocks, shock towers, screws, owner’s manual, parts list, and tools.
  • Start a custom build – Drag Slash, Sand Buggy, Monster Truck or Dirt Oval Racer.
  • Parts needed to complete the build are - transmission, drive shafts, bearings, hubs, tires, body mounts, body, and electronics.
  • Part numbers included – 5822A, 5837, 5835, 5823, 3745, 3638, 3639, 2555, 3631, 2578, 2640, 3644, 5836, 5827 and more.
Check Stock

Traxxas Slash 4x4 Ultimate 4x4 RC Truck 1/10 Scale 60+ mph Orange

  • Traxxas 68077-4 - Slash VXL Ultimate 1/10 4x4 Short Course Truck RTR, Orange.
  • Features: Traxxas Stability Management System (TSM). Powered by the Velineon Brushless Power System. Slash 4X4 Ultimate reaches speeds in excess of....
  • Includes: (1) Slash 4x4 (1) TQi 2.4GHz Radio System (1) Traxxas Link Wireless Module, Installed Telemetry Sensors (1) Velineon VXL-3S ESC (1)....
  • Specs: Length: 22.36" (568mm) Width: 11.65" (296mm) Height (overall): 7.60” (193mm) Front and Rear Track: 11.65" (296mm) distance between outer....
  • Part number(s) included (in factory packaging): 68077-4.
Check Stock

Traxxas 3752 Stub Axle Carriers (pair)

  • Requires 5x11x4mm bearings or bushings (not included).
  • Fits Electric Traxxas Rustler, 2WD Stampede and Stampede-Based vehicles, and 2WD Slash and Slash-based vehicles.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
Check Stock

GLOBACT RC Tires for 1/10 Short Course Truck Tires for Traxxas Slash 4×4 2WD HSP Tamiya HPI Kyosho Redcat AXIAL RC4WD Model Car（4Pcs/Set） Replace 5883/5883A

  • Compatible with 1/10 traxxas slash tires are Made of high quality rubber and durable in use,High Wear-resistant High Crush-resistant.
  • Suit for 1:10 Short Course Truck includes Traxxas Slash 4×4 /Traxxas Slash 2WD/Tamiya /HPI/Kyosho/Redcat/AXIAL/RC4WD RC Model Car.
  • The tire and wheel can be dissembled separately.
  • Note: Since the product is detachable, it is easy to loosen during useBefore using the tire, the tire should be fixed with glue to avoid separation of the tire from the wheel hub during use..
  • This is an accessory product for Traxxas Slash 4×4 2WD 1/10 Short Course Truck . If any question, please tell us without hesitation.
Check Stock

for Traxxas Slash Rustler Bandit Vxl 4X4 4WD 2WD Orange Parts Shocks Absorber Front Rear 1 10 Damper Short Course Racing Truck Upgrade 4-Pack

  • ✔ Compatible With traxxas slash 4x4/ traxxas rustler 4x4 vxl/traxxas slash 2wd/traxxas rustler/traxxas bandit/traxxas stampede/Rally 4X4/Hoss 4x4 VXL.
  • ✔ Fitted Really Well.Oil Filled Style,Adjustable Tension,Very Smooth And Durable.Good for Big Jumps..
  • ✔ Alloy Aluminum Front Shock Absorber : Approx.100mm.
  • Alloy Aluminum Rear Shock Absorber : Approx.110mm.
  • ✔ 4 Shocks Per Package. All Hardware For Assembly Included..
  • ✔ Premium Quality Aluminum Shocks Upgrade Parts Ship Fast .Responsive Customer Service..
Check Stock

RC-Hub 1Pcs RC Driveshafts Metal Drive Shaft 55-67mm for 1:14 Tamiya Trailer Tractor Truck RC Crawler Car

  • Drive shafts for slash 4x4 1/10 scale Traxxas Slash Platinum/Slash Ultimate/Rustler VXL 4X4/Stampede VXL 4X4/Hoss VXL 4X4/Slash VXL 4x4 parts RC Car.rustler 4x4 drive shaft..
  • Slash 4x4 axles is builtin antiseparation design reduces the failure rate, high performance, and increases the smoothness and angle of remote control car..
  • Compatible with traxxas 4x4 vxl drive shaft is with more turning power and more sturdy use.High reliability, ensuring smooth transmission..
  • Fits for traxxas drive shafts made of high-quality metal materials middle part and wheel hex adaptor is made of 6061-T6 alloy, axle part is made of update material Q235 Carbon steel, ensuring maximum durability and for long time service life..
  • RC cars drive shaft CVD comes with Screws and nuts and easy to use, you can directly use them on your RC car model. If you have any questions during use it, please contact us anytime..
Check Stock

Traxxas Slash 2WD Chassis Pre-Roller Gray Conversion Chassis 5822

  • This is a brand new Traxxas 2WD Slash chassis..
  • It includes everything seen in the pictures.
  • - chassis, skid plates, nerf bars, battery hold down, steering linkage, fiberglass tie bar, suspension arms, shock towers, camber links, screws, owners manual, parts list, and tools..
  • Turn your Stampede, Rustler, or Bandit into a Slash with this conversion chassis.
  • Pulled from a brand new Traxxas 2WD Slash..
Check Stock

Globact Aluminum Adjustable Turnbuckles/Camber Link with Rod Ends Sets for Traxxas Slash 4X4/2WD 1/10 Upgrade Parts 7Pcs Blue

  • Aluminum Turnbuckles/Camber Link with Rod Ends Sets for Traxxas Slash 4X4/2WD 1/10 Upgrade Parts,Replacement of Traxxas #1935 3644 3745 3741X....
  • 1/10 camber link adjustable Length,Long Suspension Link 6 x linkages,length from 68 to 88mm,(center to center),Short Suspension Link,1 x....
  • Compatible with traxxas slash 4x4 links package Include:7 x Adjustable Metal Links,14 x Screws and 8 x Nylon Lock-Nuts..
  • Slash 2WD Link must Note: 1. The Link Rods is installed on the chassis of the remote control car and fixed with screws to solve the loosening problem.....
Check Stock

HRB 4S 14.8V 4200mAh 60C LiPo Battery Pack with T Plug for RC Evader BX Car RC Truck RC Truggy RC Airplane UAV Drone FPV

  • Longer lifetime: 150 times minimum, Anode is made with 100% Co,Separator is used Korea imported material,aluminum laminate film is used Japan imported....
  • Size(L*W*H): 5.31*1.65*1.34in / 135*42*34mm (0 - 3mm difference), Weight: 0.9lb / 14.46oz / 410g (± 2g), All HRB products sold by HRB POWER are....
  • Compatible for: 1/8 & 1/10 rc car model such as traxxas slash, slash 4x4, emaxx, bandit, rustler version, stampede, stampede 4x4, e-maxx, monster jam....
  • Please check whether the battery surface is alright when you get it and whether the voltage is between 3.7~4.2V before using..
Check Stock

Traxxas 2797 Suspension Arm Mounts 0-Degree pair

  • Rc shock tower easily upgrades and replaces stock parts #3639 Front Shock Tower,#3638 Rear Shock Tower for Traxxas..
  • Compatible with Traxxas 1/10 Slash 2WD, Slash VXL, Stampede VXL, Bandit VXL, Bandit, Ford F-150 Raptor, Rustler VXL, Rustler etc 2WD car..
  • 2WD shock tower with multiple holes, you can adjust the angle, height, and height of the shock absorber to suit different ways of play..
  • 1/10 slash shock tower CNC precision machining, Made of aluminum alloy material, it has strong impact resistance and protects your car body from....
  • Rustler shock tower include: 1x Front, 1x Rear, 1× Screw pack.
Check Stock

Traxxas 1/10 Slash, 2WD, RTR (Includes Battery & Charger): PinkX

  • Traxxas 58034-1 - Slash XL-5 Brushed 1/10 2WD SCT RTR, w/ iD Battery, Pink.
  • Features: Titan 12-Turn 550 modified motor XL-5 waterproof electronic speed control Water-sealed receiver box and steering servo Metal gear Magnum 272 transmission Torque-Control slipper clutch 30+mph top speed Adjustable steel turnbuckles with captured rod ends The tires are mounted on satin-finish 2.2" Slash wheels Included optional 23-tooth pinion gear Traxxas 4-amp DC Peak Detecting Fast Charger Traxxas Power Cell NiMH Battery with iDTM Avai.
  • Includes: (1) Slash Short Course Race Truck (1) TQ 2.4GHz Radio System (1) ESC,(1) Body (1) Motor (1) 7-Cell 3000mAh NiMH Battery (1) 4-Amp DC iD Car Charger Illustrated Instruction Manual Decals.
  • Specs: Vehicle Dimensions: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Wheelbase: 13.2" (335mm) Ground Clearance: 3.5" (89mm) Weight: 76.2oz (2.16kg) Body Dimensions: Length: 21.3" (542mm) Width: 11.4" (289mm) Height: 5.3" (135mm) Height: 5.3" (135mm).
  • Part number(s) included (in factory packaging): 58034-1.
Check Stock

Traxxas 5891 SCT Wheels SS Black Satin Paddle Tires

  • Paddle tires feature a full-width rib for maximum bite and traction in mud, snow, and sand.
  • Tires are pre-glued and mounted with foam inserts and ready to run on your vehicle.
  • Mounted to satin-chrome beadlock style SCT wheels for use with Traxxas Slash.
  • Fits Traxxas Slash 4WD front and rear, or 2WD rear only (TSM rated).
Check Stock

Globact Aluminum Alloy Front Caster Block&Steering Blocks and Rear Stub Axle Carriers kit with Ball Bearings Upgrade Parts for 1/10 Traxxas 2WD Slash, Stampede, Rustler, Replace 3632 3736 3752

  • RC 1/10 front caster steering blocks kit can be easily upgraded and replaced #3632 Caster blocks, #3736 Steering blocks, #3752 Stub axle carriers (rear)..
  • Front steering block knuckle kit is only compatible with 1/10 Traxxas 2WD Slash, Stampede, Stampede VXL, Slash VXL, Rustler, Rustler VXL, Ford F-150 Raptor RC vehicle ONLY..
  • Suitable for traxxas rustler 2wd steering blocks use aluminum alloy material, more wear-resistant, not easy to deform..
  • Multi-hole design, adjustable tie rod angle can be used for Traxxas Slash 2WD Caster Block.
  • Globact 2WD caster steering blocks Include(Necessary parts required for installation): 2*Rear Stub Axle Carriers, 2*Steering Block, 2*Caster Blocks (L/R), 6*Screw Pins, 2*Screw, 8*5x11x4mm bearings, 4*Gasket..
Check Stock