Categories

Best Traxxas X Maxx 8s Rtr

Traxxas 4921 Clear T-Maxx 3.3 Body (long wheelbase) with Decal Sheet

  • Made using only the highest quality components.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas T-Maxx 3.3.
  • consult your user's manual for exact parts listings.
Check Stock

DAPENGNIAO for Das87 6 Pcs M0.2 Brass 10T-50T Spur Gear Accessories

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

  • 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
  • Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
  • With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..
Check Stock

Traxxas 4914R Body Mount Posts, Front and Rear

  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles!.
  • This product is made from high quality materials, and designed for lasting performance..
  • This is for use on RC vehicles such as the Traxxas T-Maxx 3.3, consult your user's manual for exact parts listings..
Check Stock

Lazmin Rubber RC Car Tires, 4pcs/Set 2inch Racing Off Road Vehicle Wheel Tires, for RC 1:10 Car Part(Gold)

  • Traxxas 7772X pre-glued black X-Maxx wheels with Maxx at tires.
Check Stock

Traxxas 7773 X-Maxx Paddle Tires and Wheels Pre-Glued and Mounted (Pair)

  • X-Maxx assembled and glued Maxx AT 8.0x4.0" tires, foam inserts, and black chrome wheels.
  • Package includes (1) left and (1) right side tire and wheel assembly.
  • This product is made from high quality materials and designed for long-lasting performance.
  • This is Replacement hardware for use on Traxxas vehicles.
  • consult your user's manual for exact parts listings.
Check Stock

Traxxas 37076-4-YLW Rustler VXL: 110 Scale Stadium Truck with TQi 2.4GHz Radio System & Traxxas Stability Management (TSM)

  • Traxxas 37076-4 - Rustler VXL Brushless 1/10 2WD Stadium Truck RTR, Yellow.
  • Features: Traxxas Stability Management Powered by the Velineon Brushless Power System Rustler VXL reaches speeds in excess of 70mph!* Patented Traxxas High-Current Connector transfers maximum voltage to the Velineon Brushless Power System Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow Maxx Cable 12-gauge wire Velineon VXL-3s Electronic Speed Control Velineon 3500 Brushless Motor TQi 2.4GHz transmitter Dig.
  • Includes: (1) Rustler VXL Chassis RTR (1) Velineon Brushless Motor (1) Velineon ESC (1) 2.4GHz Radio with High-torque Digital Servo (1) Painted Body w/Rear Wing (1) Instruction Manual.
  • Specs: Vehicle Dimensions: Length: 17.5" (445mm) Width: 12.6" (320mm) Height: 6.7" (170mm) Weight: 3.3lbs (1500g) Approx., Wheelbase: 11.6" (294mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.25" (311mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Tires-Front and Rear: 2.8" (72mm) Wide, 5" (127mm) Diameter, Body Dimensions: Length: 16" (406mm) Width: 6.5" (164mm) at Rear Wheels (Widest Poi.
  • Part number(s) included (in factory packaging): 37076-4.
Check Stock

Traxxas 2997 - Power Cell 8S 14.8V LiPo Battery / Dual iD Charger Completer Pack

  • Traxxas 2997 - Power Cell 8S 14.8V LiPo Battery / Dual iD Charger Completer Pack.
  • Features: Battery Charger: 200 Watt 26+ amp output Recognizes iD-equipped batteries to optimize charger settings MAXX Charge feature gets you back in....
  • Includes: (1) Traxxas 2973 EZ-Peak 200W Dual Charger (2) Power Cell 11.1V 6700mAh 25C LiPo 4S Batteries.
  • Specs: Battery Charger: AC Input: 100-240V, 50-60Hz, 2.35A Charge Current Range: 1.0—16.0A per channel (26.0A total maximum charge current)....
  • Part number(s) included (in factory packaging): 2997.
Check Stock

Truck Stainless Steel Chassis Armor Skid Plate Hollow Version -5pcs Set for Traxxas X-Maxx XMAXX 6S 8S

  • Attention:The item as the main picture show hollow version.Other pictures are only show how to use.
  • What you see in the main picture is what you will receive..
Check Stock

Duratrax Hatchet X Belted Mounted Tires, 24mm Black (2), DTXC5503

  • Paddle tires feature a full-width rib for maximum bite and traction in mud, snow, and sand.
  • Tires are pre-glued and mounted with foam inserts and ready to run on your vehicle.
  • Mounted to black X-Maxx wheels for use with Traxxas X-Maxx.
Check Stock

HRB 2PCS 2S 7.4V 2200mAh LiPo Battery (2.46inch Lenth) Compatible with Traxxas 1:16 Slash, 1/16 E-Revo, 1/16 Summit, Rally Vehicles, 50C TR Plug RC Batteries

  • HRB Professional LiPo Battery: Superior Japan and Korea Lithium Polymer raw materials..
  • Quickly Recharged, long cycle life (150 times minimum), up to 200Wh/kg energy density..
  • Cell: 2S, Capacity 2200mAh, Discharge Rate: 50C.
  • Size(L*W*H): 3.46*1.34*0.79in / 88*34*20mm (0 - 3mm difference), Weight: 0.24lb / 3.88oz / 110g (± 2g).
  • Perfect Compatible with Traxxas 1/16 Slash, for Traxxas 1/16 E-Revo (brushed & VXL Brushless), for Traxxas 1/16 Slash, for Traxxas 2820X, for Traxxas 1/16 Summit VXL , for Traxxas 1/16 Rally....(such as Revo, Fiesta, Boss 302 Mustang, Latrax Rally, Team Associated REFLEX 14T Truggy RTR, REFLEX 14B Buggy RTR, CR12 Ford F150 Pick-Up RTR).
Check Stock

CASTLE CREATIONS Motor, 4-Pole SENSORED BRUSHLESS 1717-1650kV, Green

  • High-strength, high-temperature grade neodymium sintered magnets combined with a high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions..
  • Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor resulting in a longer lifetime..
  • Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible..
  • High quality, high-current 6.5mm male Castle Bullet Connectors attached to ultra-high strand count replaceable 10-gauge wire.
  • Ideal for 1/6 scale vehicles up to 20lbs running 6s – 8s LiPo.
  • it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles. Examples include Losi LST2-E.
  • Redcat Shredder. Note: "Recommendations based on vehicle weight and motor capabilities. Verify motor fitment, may require optional motor mount.".
Check Stock

Traxxas 5368 Throttle and Brake Linkage Set

  • Use original Traxxas parts to get the most out of you Traxxas RTR vehicles.
  • Please refer to your vehicle's user for selecting the correct part.
  • Exploded views of your model can be found on the Traxxas website.
  • Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
  • This product is made from high quality materials, and designed for lasting performance.
  • This is for use on RC vehicles such as the Traxxas Revo, consult your user's manual for exact parts listings.
Check Stock