Best Trimmer Potentiometers

uxcell - a15011600ux0235 5 Pcs 10K OHM Linear Taper Rotary Potentiometer 10KB B10K Pot Zinc Plating with 13mm Shaft

• ☛ High Quality 3296W Multiturn Trimmer Potentiometers Assortment Kit..
• ☛ Model : 3296W, Mounting Type: Through Hole (DIP), Resistive Material : Cermet..
• ☛ Package Include: 120pcs, The Package Contains 12 Values of Each 10pcs, Packed in A Rugged Convenient Re-sealable Plastic Storage Case..
• ☛ The Kit Resistance Value Include: 100Ω, 1KΩ, 10KΩ, 100KΩ, 200Ω, 2KΩ, 20KΩ, 200KΩ, 500Ω, 5KΩ, 50KΩ, 500KΩ.
• ☛ Use for Device Interior or Printed Circuit Boards Which Adjustable the Resistance less..

ElecGear 4X Replacement Joystick (EL2 FU 10K) for PS4 / PS3 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module for Playstation

• [EL2 FU 10K for PS4/PS3 Controller] – 4x replacement analog joystick was found in some PS4 DualShock 4 came with PlayStation 4 Pro, and some PS3 controllers also use this version. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10KΩ trimmer potentiometers in orange.
• [Compatibility] – The 14 prongs were positioned as the same as ALPS edition. Technically, the whole unit is interchangeable with EL1 ALPS 10K used in PS4 controllers, and other brands like ‘Scuf’ and ‘Razer Raiju Ultimate’ with ALPS joysticks inside. However, the trim pot resistor alone is not interchangeable with ALPS edition.
• [Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting.
• [When to replace] – The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no react....

10K Ohm Trim Potentiometer Breadboard Trim Potentiometer Kit with Knob Variable Resistors Trimmer Potentiometer Assortment Kit Compatible with Arduino, Blue (12 Pieces) (12 Pieces)

• Package content: you will receive 12 pieces of trim potentiometers with knobs in blue color, suitable for breadboarding and prototyping.
• Such a sufficient quantity can easily meet your daily usage and replacement demand.
• Reliable to use: composed of quality material, these breadboard trim potentiometers are safe and sturdy, reliable and stable, will not easily break or deform, which can be applied for long-term use.
• Reasonable design: with round pins rather than flat blade pins of other trimpots, these linear potentiometers are suitable for both breadboarding and PCB.
• The knurled knob with arrow design allows you to easily adjust by hand or small flat blade screwdriver.
• Specification: these trim potentiometers adopt linear resistance change mode, the rotation angle is 270 degrees, and adjustable range is 0-10K ohm, which are easy to connect and can work well.
• Dimension information: each rotary potentiometer measure approx. 0.375 x 0.375 x 0.19 inch/ 9.5 x 9.5 x 4.9 mm, such a small size only requires little space, which makes them easy for you to store.

Twidec /52Pcs Potentiometer 100,200,500,1K,2K,5K,10K,20K,50K,100K,200K,500K,1M ohm Each 4Pcs Single Turn Trimmer Potentiometer Assortment Kit with Storage Box 13 Kinds 3362P-13

• Product name:3362P Single turn Trimmer Potentiometers Assortment Kit..
• Package Include: 52pcs, The Package Contains 13Values of Each 4pcs, The overall package is a beautiful and durable plastic box..
• Package Detail Include: : 100Ω, 200Ω,500Ω, 1KΩ, 2KΩ,5KΩ,10KΩ, 20KΩ, 50KΩ, 100KΩ, 200KΩ, 500Ω, 1MΩ..
• package content: 52 x trimming potentiometer..

uxcell 5 Pcs 100K Ohm Trimmer Pot Variable Resistor Potentiometer

• Square Body Size : 6.8 x 6.8mm/ 1/4" x 1/4" (L*W).

KAISH Set of 4 Witch Hat Knobs with Set Screw Guitar Bass Knobs 2 Volume 2 Tone for 72 Telecaster Custom or Guitar Amplifiers

• KAISH skirted black 1-10 knobs for '72 Telecaster Custom.
• Designed to fit 1/4"solid shaft potentiometers as well as any 18 coarse splines or 24 fine splines split shaft potentiometers, great for many other instruments or amplifiers building projects as well.
• Can also be fitted to nearly all 250K/500K solid shaft pots.
• Package includes 2 Volume and 2 Tone knobs.

TWTADE 150Pcs 6mm Variable Resistor Potentiometer Assortment Kit 15 Values 100 ohm-2M ohm in Plastic Box DWJ-150P

• TWTADE Brand New and High Quality Variable Resistor Assortment Kit.
• Package Type: 15 Values,100Ω,200Ω,500Ω,1KΩ,2KΩ,5KΩ,10KΩ,20KΩ,50KΩ,100KΩ,200KΩ,500KΩ,1MΩ,2MΩ,300KΩ potentiometers.
• Package Quantity:Variable Resistor Assortment Kit 15 Values 150 pcs potentiometers.
• Adjustment Type: Top Adjustment.Use for Device Interior or Printed Circuit Boards Which Adjustable the Resistance Less..
• Package Content: 150 pcs potentiometer(Each value 10 pcs) + 1 pcs storage box.

Butom C1U-W19 Carburetor Repower Kit for Poulan Husqvarna 530071811 P4500 P4500E PP26E PP025 PP125 PP258TP PP258TPC PP325 SM705 SM706 Trimmer Pruner ZAMA C1U-W19 358.791530 25cc Craftsman Weedeater

• Carburetor Replace manufacturer part number:ZAMA C1U-W19, Poulan Pro Husqvarna Craftsman 530071811.
• Fitment models: ZAMA C1U-W19 358.791010 358.791540 358.796600 358.791050 358.79101 358.791030 358.79105 358.79660 358.791590 358.791560 358.79103 358.791530 358.79159 358.79156 358.791530 25cc Craftsman Weedeater 358.791032 Weedwacker.
• Fitment models: 358791010 Weedwacker 358791030 Trimmer 358791031 Trimmer 358791032 Trimmer 358791050 Trimmer 358791051 Trimmer 358791530 Trimmer 358791540 Trimmer 358791560 Trimmer 358791590 Trimmer 358791820 Trimmer 358796600 Trimmer 944514460 Trimmer 944515560 Trimmer 944516360 Trimmer 944516550 Trimmer 944516560 Trimmer 944516561 Trimmer.
• Fitment models: P4500 Gas Trimmer, P4500F Gas Trimmer, PP025 Gas Trimmer , 025 - Poulan Pro Gas Trimmer, PP125 Gas Trimmer , 125 - Poulan Pro Gas Trimmer, PP125E - 967112801 (2012-03), PP258TP Pole Pruner, PP258TPC - 579218001 (2011-10), PP25CFA - 967185601 (2013-07), PP25E Gas Trimmer, PP25SFA - 967185701 (2013-06), PP26E Gas Trimmer, PP325 Gas Trimmer, 325 - Poulan Pro Gas Trimmer SM705 Gas Trimmer, SM706 Gas Trimmer.
• Fitment models: Craftsman 358.791530 25cc weed eater Craftsman 358.745501 25 cc Pouland pole saw carburetor Sears Weed Wacker model 358.791010.

kipa Carburetor Maintence Kit for Poulan Husqvarna 530071811 P4500 P4500E PP26E PP025 PP125 PP258TP PP258TPC PP325 SM705 SM706 Trimmer Pole Pruner ZAMA C1U-W19 358.791530 25cc Craftsman Weedeater

• This is a new top quality Carburetor Maintence kit including: 1 X New Carburetor, 1 X New Air Filter, 1 X New Fuel Filter, 1 X New Spark Plug, 2 X New Primer Bulbs, 1X New Fuel Lines 2 X New Mounting Gaskets, 1 X New Screwdriver for carburetor adjustment. Easy to install and adjust, Perfect Maintence kit for your trimmer and weadeater Etc Outdoor machines. Kindly note: The Fuel Lines are for fuel filter connect only, Some of the blower needs a little large fuel line for fuel tank connecting..
• Carburetor Kit Replace For ZAMA C1U-W19 358.791010 358.791540 358.796600 358.791050 358.79101 358.791030 358.79105 358.79660 358.791590 358.791560 358.79103 358.791530 358.79159 358.79156 358.791530 25cc Craftsman Weedeater 358.791032 Weedwacker.
• Carburetor Replace for 358791010 Weedwacker 358791030 Trimmer 358791031 Trimmer 358791032 Trimmer 358791050 Trimmer 358791051 Trimmer 358791530 Trimmer 358791540 Trimmer 358791560 Trimmer 358791590 Trimmer 358791820 Trimmer 358796600 Trimmer 944514460 Trimmer 944515560 Trimmer 944516360 Trimmer 944516550 Trimmer 944516560 Trimmer 944516561 Trimmer.
• Carburetor Kit for P4500 Gas Trimmer, P4500F Gas Trimmer, PP025 Gas Trimmer , 025 - Poulan Pro Gas Trimmer, PP125 Gas Trimmer , 125 - Poulan Pro Gas Trimmer, PP125E - 967112801 ....

Amp handle, brown raised vintage

• 100 ohm potentiometer with 1/4 Inch threaded brass bushing for mounting to amplifier chassis.
• Adjustable level control (using flat head screwdriver). Includes mounting nut and washer.
• Used as hum balance control in 65 Twin Reverb Machete, and Vibrasonic amplifiers manufactured from 1992-Present.
• Top-quality potentiometers used on Fender amplifiers.

Potentiometers 100K Ohm 10% 2W 6.35mm

Aven 13016 9 Piece Anti-Static Alignment Tool Kit

• Kit contains nine alignment tools constructed from a special nylon type material that cannot retain a static charge.
• Ideal for electronic or TV technicians, or for adjusting conventional components including if cans, RF coils, trimmers, potentiometers, etc.

Fender Telecaster/Precision Bass Knobs - Knurled Chrome

• Package includes two knurled flat-top knobs and mounting set screws.
• Designed to fit most 1/4" solid shaft potentiometers.
• Fits most Telecaster and Precision Bass instruments (US and Mexico) manufactured from '51-Present.