Categories

Best Trolling Boat Motors

Minn Kota 1854053 MKA-53 Electric Steer Trolling Motor Composite Quick Release Bracket Black

  • Designed to meet the increased stress created by high thrust motors and long shaft lengths.
  • Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck.
  • Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck.
  • Constructed of marine grade composite, powder-coated aluminum, and stainless steel to resist rust, corrosion, and discoloration.
  • Recommended for 112 lbs thrust and 72" shaft trolling motors.
Check Stock

Ironwood Pacific HelmsMate Tiller Extension Handle U | Universal Joint Model | 37\-51\ Extendable

  • Full steering and throttle control while sitting away from your trolling or small outboard motor.
  • Fits gas and electric outboard boat trolling motors 15HP and under.
  • Anodized aluminum, corrosion resistant fittings and unbreakable nylon clamp are designed to last.
  • Designed to fill tiller handles on all electric and gas outboard motors 15 hp or under.
Check Stock

Watersnake 3 Blade Propeller Kit for 12 Volt Motors

  • COMPATIBILTY: This boat propeller is compatible with Watersnake electric trolling 12 volt Assault and Venom motors..
  • QUALITY: Our Watersnake electric motors are increasing anglers’ catches in more than 30 countries. You’ll see our motors attached to the bows of tournament bass boats, mounted on family fishing boats, locked onto the transoms of the traditional tinny and even powering modern kayaks and canoes. We try to keep things simple at Watersnake and so every day our team focuses on just one thing: making better motors..
  • DURABLE: Watersnake Trolling motor propeller replacement kit is durable and made to last. Designed to chew through the heaviest of underwater grasses and marsh while maximizing thrust to provide speed and efficiency in the water..
  • KIT INCLUDES: Propeller, propeller nut and shear pins..
Check Stock

Pro Controll EZ Mount II Bow Mount Trolling Motor Bracket

  • UNIVERSAL REPLACEMENT: A universal bracket that converts transom mount trolling motors to bow mount in minutes.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep..
  • STRONG & STURDY: Built to mount trolling motors up to 60 lb thrust.
  • Indestructible fiberglass reinforced nylon.
  • FAST & EASY SET UP: Installs quickly with a small hammer and punch to remove and replace pin.
  • Spend less time assembling and more time fishing.
  • ULTIMATE VERSATILITY: A trolling motor mounting bracket with choices.
  • EZ Mount 2 lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

Wilderness Systems Transom Trolling Motor Mount for Kayaks

  • Transom trolling motor bracket for clamp-on electric trolling motors.
  • Marine Board backing plate keeps motor clamp tight and secure.
  • Maximum trolling motor thrust of 36 pounds.
  • Heavy duty 13-gauge stainless steel construction.
  • Designed for any boat with a flat spot on the stern big enough for a power pole. Rectangular mounting hole pattern is 3.75” x 4.75”.
Check Stock

Bullnose Rudder clamp on boat rudder fits a 1.125\ transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured

  • PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S.
  • FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more..
  • ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install a....
Check Stock

PWM Controller, Briidea DC 12-48V 35A Waterproof Motor Speed Controller with Forward-Brake-Reverse Switch, Adjustable Potentiometer and LED Display, Easy Assembly, Perfect for Trolling Boat Motor

  • ...screen, accurate and real-time display of the rotation value.
  • EXCELLENT WATERPROOF PERFORMANCE: Compared to the market products, Briidea Governor with IP65 level waterproof performance, so you can easily face water damage, puddles, rainwater and other situations, ideal for trolling boat engines, and built-in high-efficiency thermal conductivity sheet to extend the product life.
  • EASY TO CONNECT: You can connect this product directly with wires without the need to make terminals connect. Support up to 6AWG wire access, suitable for most trolling boat engines. Note: The positive and negative terminals of the power supply cannot be reversed, otherwise it will be damaged.
  • SWITCH FUNCTION: Briidea Governor comes with a high-power speed switch, is more adaptable, and provides positive and negative motion keys, easily changing the direction of the motor.
  • WIDELY USED: The product is used to control DC brush motors, supporting DC12-48V voltage access, continuous current 35A, peak 60A, which meets the specifications of most devices containing brush motors, such as: trolling boat engines, blow....
Check Stock

Minn Kota 1358761 PowerDrive Freshwater Electric-Steer Bow-Mount Trolling Motor with Universal Sonar 2, Digital Maximizer, & i-Pilot GPS, 70 lbs Thrust, 60' Shaft

  • Universal Sonar 2: Keeps your transducer and wiring completely concealed and protected, running everything through the trolling motor’s shaft, with shielded connectors.
  • i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.
  • AutoPilot: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
  • Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
Check Stock

Minn Kota 1358749 PowerDrive Freshwater Electric-Steer Bow-Mount Trolling Motor with Universal Sonar 2, Digital Maximizer, & i-Pilot GPS, 55 lbs Thrust, 54" Shaft

  • Universal Sonar 2: Keeps your transducer and wiring completely concealed and protected, running everything through the trolling motor's shaft, with shielded connectors.
  • i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.
  • AutoPilot: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
  • Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a ....
Check Stock

Minn Kota 1363737 Riptide Terrova Saltwater Electric-Steer Bow-Mount Trolling Motor with i-Pilot Link GPS, 112 lbs Thrust, 87' Shaft

  • i-Pilot Link Integrated GPS Trolling System: i-Pilot Link gives you unprecedented control over your boat by linking your trolling motor to your Humminbird fish finder. Control your trolling motor from Link’s color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more.
  • Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot Link GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot Link remote or Humminbird fish finder..
  • AutoPilot: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
  • Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable....
Check Stock

Pro Controll EZ Mount Trolling Motor Bow Mount Bracket

  • MORE MOUNTING OPTIONS: Fish from the bow like the Pros.
  • An mounting bracket that converts transom mount trolling motors to bow mount.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep.
  • PREMIUM DURABILITY: Constructed with stainless steel hardware and indestructible fiberglass reinforced nylon.
  • FAST SET UP: Simple and seamless tool-free installation.
  • Line up the lower bracket to the outside of the boat, screw clamps tight, and slide on the trolling motor.
  • UNIVERSAL FIT: Measures 9.5” L x 6.75” W x 9” H and weighs 6 lbs.
  • EZ Mount lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

Minn Kota 1358744 PowerDrive Freshwater Electric-Steer Bow-Mount Trolling Motor with Digital Maximizer & i-Pilot GPS, 55 lbs Thrust, 54\ Shaft

  • i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.
  • AutoPilot: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current.
  • Digital Maximizer: Provides up to 5 times longer run time on a single battery charge. These variable speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.
  • Weedless Wedge 2 Prop: With swept-back flared blades to power through anything without battery-draining chopping and hacking, the Weedless Wedge 2 is one of the most trusted props in fishing.
  • Included Components: Powerdrive 55/Ip Bt.
Check Stock

Ironwood Pacific EasyTroller Trolling Plate - Standard with Fins for Motors 50 HP - 300 HP

  • SLOWS TROLLING SPEED - Slow your boat to as low as 1 MPH for the ideal trolling speed.
  • DAMAGE-RESISTANT DESIGN - The patented hinged plate design flexes upward to prevent damage to the plate under accidental acceleration.
  • EASY INSTALLATION - Mounts directly to the cavitation plate of your outboard or outdrive, a few inches behind the propeller.
  • TWO MODELS TO FIT YOUR MOTOR - The Standard Model fits outboard and stern drive motors of 50-300 horsepower, while the Short Model is for 30-45....
  • OPTIONAL FINS FOR GREATER PERFORMANCE - The optional hydrofoil trolling plate model combines two products into one to improve fuel economy and....
Check Stock