Categories

Best Trolling Motors For Pontoon Boats

NyVoozy Transom Trolling Motor Mount for Kayaks, Trolling Motor Mount for Clamp-on Electric Trolling Motors, Maximum Trolling Motor Thrust of 62 Pounds

  • Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don’t worry rudder out of control any more. It is recommended using for towing motors which the biggest horsepower up to 3 HP or the biggest thrust up to 70 pounds, recommended the maximum weight for 55 pounds..
  • Our kayak rudder kit measures 3.75″ high x 4.75″ wide and suitable for a 23-32MM” shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It’s commonly used for motor guide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc..
  • It can last long time. And the screws are made from hight quality material which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater..
  • Very easy to install, just with screws, you could install our trolling motor mount to trolling motor only a few minutes. Because of multiple pattern screws, so you could install it on all kinds of boats..
Check Stock

Five Oceans FO4204 Marine Boat Adjustable Outboard Motor Bracket, Heavy Duty, AISI316 Stainless-Steel Fine Polished for 2 and 4 Stroke Outboards Up to 88lbs 40kg, Black Poly Mounting Board 20HP

  • Heavy-duty structure made of AISI3616 polished stainless steel. Extra-wide 10-1/4 inches x 7-1/2 inches white poly mounting board for the new wider style motor locking clamps.
  • They are designed for 4-stroke engines. Accommodates long or short shaft motors. New, ergonomically designed twist lock safety knobs secure bracket in place.
  • Designed to resist the harsh conditions of the marine environment. Ideal for Fishing, Pontoon, small power, sailing boats.
  • Built especially for new four strokes, heavier, high torque motors. Allows you to raise and lower trolling and auxiliary engines with ease.
  • 11 inches of vertical travel. Simple to operate with four (4) vertical running positions lock bar to compensate for water surface and boat load conditions. Stainless steel springs help counterbalance outboard motor weight.
Check Stock

Pro Controll EZ Mount II Bow Mount Trolling Motor Bracket

  • UNIVERSAL REPLACEMENT: A universal bracket that converts transom mount trolling motors to bow mount in minutes.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep..
  • STRONG & STURDY: Built to mount trolling motors up to 60 lb thrust.
  • Indestructible fiberglass reinforced nylon.
  • FAST & EASY SET UP: Installs quickly with a small hammer and punch to remove and replace pin.
  • Spend less time assembling and more time fishing.
  • ULTIMATE VERSATILITY: A trolling motor mounting bracket with choices.
  • EZ Mount 2 lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size

  • 3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
  • CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
  • FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
  • REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
Check Stock

Trolling Motor Accessories, Haoguo Paddle Boat Parts, Boat Rudder Fits Most 24-55 Thrust Trolling Motors, Great for Pontoon, Fishing Kayak, Canoe, Jon Boat

  • MORE CONTROL – Turns easily when steering and provides better control in wind and most weather conditions, decreasing the need for oars, it does help to keep your boat on course in the wind, and prevent the boat from spining as much when the motor is off.
  • UNIVERSAL MOUNT – Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder. Please note, it will NOT work on a self deploy bow mount trolling motor.
  • EASY INSTALLATION – Complimentary socket wrench for easy installation, it takes only a few minutes to attach the rudder to the shaft of your small watercraft motor and can be mounted in an upright position on the front or back of the shaft. You may even mount it with the short end down (upside down) for shorter motors. A universal design for your needs.
  • BOW MOUNT – Fits the EDGE, Minn Kota, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Your bow mount setup needs to have 1ft shaft protruding from the end of the platform allowing enough room to attach the rudder.
Check Stock

ISURE MARINRE Aluminium Boat Outboard Motor Bracket Kicker 7.5-20HP Heavy Duty Trolling Yacht

  • ➤Material: Anodised aluminium construction，solid polypropylene mounting board..
  • ➤Suitable for 2-stroke 7-1/2-20HP motors, with a maximum weight of 52kg (115lbs), very suitable for small and medium motor boats and yachts..
  • ➤Mounting holes have a horizontal distance of 100mm across (centre to centre), and multiple vertical holes for different mounting options..
  • ➤Sturdy design with smooth, spring-assisted lifting action Fully adjustable with 5 stop locations..
  • ➤Retractable bracket for trolling auxiliary motors on power and sailboats with ease, Heavy duty with reinforced welded frame and stamped stainless components..
Check Stock

Pro Controll EZ Mount Trolling Motor Bow Mount Bracket

  • MORE MOUNTING OPTIONS: Fish from the bow like the Pros.
  • An mounting bracket that converts transom mount trolling motors to bow mount.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep.
  • PREMIUM DURABILITY: Constructed with stainless steel hardware and indestructible fiberglass reinforced nylon.
  • FAST SET UP: Simple and seamless tool-free installation.
  • Line up the lower bracket to the outside of the boat, screw clamps tight, and slide on the trolling motor.
  • UNIVERSAL FIT: Measures 9.5” L x 6.75” W x 9” H and weighs 6 lbs.
  • EZ Mount lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

Brocraft Deck Mount Trolling Motor Bracket/Outboard Motor Mount

  • Universal trolling motor bracket for clamp-on type electric trolling motors..
  • Constructed of marine aluminum with black Nylon plastic.
  • Designed for motor to be removed when boat is under engine power or being trailered..
  • For electric trolling motors only. Not for outboard engines of any size..
  • Maximum trolling motor thrust of 36 pounds,Come with a two years limited warranty.
Check Stock

Trolling Motor Plug Receptacle Set, ABPF Marine Boat Power Connector, Waterproof Connector for Motor, 12/24/36/48 Volt Marine Plug for Trolling Motors (Blue,1 Pack)

  • BEST CHOICES FOR TROLLING MOTORS: This plug and receptacle set will work perfectly for marine trolling motors. The unique design plug and receptacle could connect trolling motor and power supply stable. A self-locking design could prevent the plug from suddenly breaking off. It will have the best performance to make the boat easy to work on and ensure your safety because of high-quality materials..
  • PREMIUM MATERIAL: You will see the Corrosion-resistant, Brass gold-plated electrical components. The trolling motor plug and receptacle has the ability of IP67 waterproof, flame retardant, and high-temperature resistance. It can help to connect in any freshwater or saltwater application. Its weatherproof feature makes it durable will keep you safe and protect your boat in extreme weather. It will provide the best service for you..
  • RELIABLE & CONVENIENT: Marine plug and receptacle has the best design, which is very easy to use and self-locking. It has a watertight sealing cap and a gasket to enhance the ability to be waterproof. You don't need to worry about the trolling motor plug will be lossen when the sea has extreme weather. Also, You will feel easy to use th....
Check Stock

Minn Kota 1854053 MKA-53 Electric Steer Trolling Motor Composite Quick Release Bracket Black

  • Designed to meet the increased stress created by high thrust motors and long shaft lengths.
  • Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck.
  • Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck.
  • Constructed of marine grade composite, powder-coated aluminum, and stainless steel to resist rust, corrosion, and discoloration.
  • Recommended for 112 lbs thrust and 72" shaft trolling motors.
Check Stock

BTG Gear 4-Step Heavy-Duty Pontoon Boat Boarding Marine Folding Ladder, Aluminum w/ Quick Release Clips, extends up to 42"

  • EXTENDS 37” DOWN FOR EASY BOARDING - 4-Steps for easy boarding. Extends 42” down when fully extended..
  • GREAT FOR PONTOON BOATS - Heavy duty pontoon boat ladder for pontoon boats and other boats with mounting platforms..
  • EXTRA WIDE STEPS – Each gripped step measures 2”x12.25” for comfortable climbing and boarding..
  • QUICK RELEASE CLIPS – Can be quickly connected or disconnected from your boat to allow for easy storage when not in use..
  • SIMPLE INSTALLATION AND INCLUDES ALL NECESSARY HARDWARE – Includes all necessary stainless steel hardware for installation. Installation is simple and easy..
Check Stock

Aluminium Outboard Motor Bracket for Boat, Marine Outboard Motor Engine Surpport Auxilary Up To 20HP Mounts 2 Stroke

  • ✅ Suitable for 2-stroke 7-1/2-20HP motors, with a maximum weight of 52kg (115lbs), very suitable for small and medium motor boats and yachts..
  • ✅ Stainless Steel Springs Counter-balance Motor Weight.
  • ✅ Base material: plastic, Frame: anodised aluminium, screws: stainless steel.
  • ✅ 4-position Locking Height Adjustment.
  • ✅ Broad Size: 8-1/4" * 10-3/8" (210mm*264mm).
  • ✅ Mounting Size 5-1/4” * 9” (133.35mm*228.6mm).
  • ✅ Mounting holes have a horizontal distance of 100mm across (centre to centre), and multiple vertical holes for different mounting options..
  • ✅ Sturdy design with smooth, spring-assisted lifting action Fully adjustable with 5 stop locations..
  • ✅ Retractable bracket for trolling auxiliary motors on power and sailboats with ease, Heavy duty with reinforced welded frame and stamped stainless components..
  • ✅ Please feel free to cotnact us if you have any questions..
Check Stock

Ironwood Pacific HelmsMate Tiller Extension Handle U | Universal Joint Model | 37\-51\ Extendable

  • Full steering and throttle control while sitting away from your trolling or small outboard motor.
  • Fits gas and electric outboard boat trolling motors 15HP and under.
  • Anodized aluminum, corrosion resistant fittings and unbreakable nylon clamp are designed to last.
  • Designed to fill tiller handles on all electric and gas outboard motors 15 hp or under.
Check Stock