Categories

Best Trolling Motors Transom Mounts

Pro Controll EZ Mount Trolling Motor Bow Mount Bracket

  • MORE MOUNTING OPTIONS: Fish from the bow like the Pros.
  • An mounting bracket that converts transom mount trolling motors to bow mount.
  • Fits most Jon or Utility boats with gunnels or toprails less than three inches wide and one inch deep.
  • PREMIUM DURABILITY: Constructed with stainless steel hardware and indestructible fiberglass reinforced nylon.
  • FAST SET UP: Simple and seamless tool-free installation.
  • Line up the lower bracket to the outside of the boat, screw clamps tight, and slide on the trolling motor.
  • UNIVERSAL FIT: Measures 9.5” L x 6.75” W x 9” H and weighs 6 lbs.
  • EZ Mount lets you install your transom mount motor anywhere on the boat.
  • Built with the needs of the Angler in mind.
Check Stock

LOBOTOU Inflatable Boat Engine Outboard Motor Mount Bracket

  • Universal bracket for electric trolling motors.
Check Stock

Garmin 010-01960-00 GT20-TM Transducer

  • Consistently displays fish arches as well as clear pictures of objects, structure and fish that pass below your boat.
  • 20 ft. transducer cable with built-in fast response temperature sensor has a power rating of 500 W.
  • Depth of 1,900 ft. (traditional) and 750 ft. (ClearVü).
  • Operating frequencies of 77/200 kHz (traditional) and 455 kHz (ClearVü).
  • Transducer comes with transom and trolling motor mounts and installation instructions.
Check Stock

Bullnose Rudder clamp on boat rudder fits a 1.125\ transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured

  • PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S.
  • FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more..
  • ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install a....
Check Stock

Five Oceans FO4205 Marine Boat Adjustable Outboard Motor Bracket, Heavy Duty, AISI316 Stainless-Steel Fine Polished for 2 and 4 Stroke Outboards Up to 130lbs 60kg, Black Poly Mounting Board 25HP

  • Heavy-duty structure made of AISI3616 polished stainless steel. Extra-wide 10-1/4 inches x 7-1/2 inches black poly mounting board for the new wider style motor locking clamps Transom Plate Measures: 4-3/8 inches x 4-7/8 inches.
  • They are designed for 4-stroke motors. Accommodates long or short shaft motors. New, ergonomically designed twist lock safety knobs secure bracket in place.
  • Suitable for motors up to 25HP with a maximum weight of 130 pounds. Designed to resist the harsh conditions of the marine environment. Ideal for Fishing, Pontoon, small power, sailing boats.
  • Built especially for new 4 strokes, heavier, high torque motors. Allows you to raise and lower trolling and auxiliary motors with ease.
Check Stock

Ironwood Pacific EasyTroller Trolling Plate - Standard with Fins for Motors 50 HP - 300 HP

  • SLOWS TROLLING SPEED - Slow your boat to as low as 1 MPH for the ideal trolling speed.
  • DAMAGE-RESISTANT DESIGN - The patented hinged plate design flexes upward to prevent damage to the plate under accidental acceleration.
  • EASY INSTALLATION - Mounts directly to the cavitation plate of your outboard or outdrive, a few inches behind the propeller.
  • TWO MODELS TO FIT YOUR MOTOR - The Standard Model fits outboard and stern drive motors of 50-300 horsepower, while the Short Model is for 30-45....
  • OPTIONAL FINS FOR GREATER PERFORMANCE - The optional hydrofoil trolling plate model combines two products into one to improve fuel economy and....
Check Stock

Intex Seahawk 4 Inflatable Raft Set and 2 Transom Mount Boat Trolling Motors

  • Intex 12V Transom Mount Boat Trolling Motor | 68631E.
  • There will be no part of the lake out of your reach!.
  • Ideal for a wide variety of boats including these Intex inflatable boats:.
Check Stock

Garmin Striker 4 3.5" Chirp Fishfinder GPS (010-01550-00) with Protective Cover

  • GARMIN USA AUTHORIZED - Includes Full GARMIN USA WARRANTY.
  • Easy-to-use 3.5-inch color fishfinder with built-in, high-sensitivity GPS.
  • Includes CHIRP (77/200 kHz) sonar transducer.
  • transmit power (200 W RMS)/(1,600 W peak-to-peak).
  • IN THE BOX: STRIKER 4 | Dual-beam transducer | Transom and trolling motor mounts | Tilt/swivel mount | Power cable | Documentation | Garmin Authorized Full USA Warranty.
  • BUNDLE INCLUDES: Garmin Striker Protective Cover 010-12441-00 - GRSTRIKERPC.
Check Stock

Newport 9ft 6in Del Mar - Inflatable Dinghy Boat - Transom Sport Tender Boat, 4 Person - 10 Horsepower - USCG Rated, White/Gray

  • Innovative Transom Saver helps lessen stress on a boat’s transom when boat with an outboard motor is being trailered.
  • Reliably supports the cantilevered engine during transport.
  • Comes with a choice of mounts for the end attached to the trailer: roller bracket or trailer mount bracket.
  • Composite head securely holds the engine (For use with motors 100 HP and under).
Check Stock

Codinter Kayak Motor Mount, Trolling Motor Mount Kit for Sit-On-Top Fishing Kayak Scupper Holes/Kayak Mount Tracks

  • 【Two Install Scenes】 This kayak motor mount works with kayak scupper holes and parallel kayak mount tracks, such as sit-on-top kayaks and fishing kayaks, not for declining flush mount fishing rod holders in the kayak.
  • 【No Drilling Requires】 Installing this kayak trolling motor mount kit does not have to drill into your kayak hull, It’s easy to install just simply plug into the scupper holes or mount it on the track, it’s stable and tightened by the supplied ratchet strap.
  • 【Quality Materials】 The materials used to make this kayak motor mount bracket include anodized aluminum, UV stabilized reinforced plastics, and stainless steel fasteners, this kit is extremely durable and built to last for fresh or saltwater use.
  • 【Heavy Duty】 The mounts are designed to fit into kayak scupper holes / tracks that range from 3.54”-31.5” in width, the diameter of the poles is 1 inch. It can be rated to hold up to 66lb (30kgs) thrust trolling motors.
  • 【Motor Mount】 Suitable for mounting electric and petrol trolling motors either right or left hand side.
Check Stock

PARKHO HASWING Electric Trolling Motor – 24V 5 HP Power 39.4 Inch Shaft Protruar Brushless Transom Mount Bracket Stepless Speed Control Boat Fishing Saltwater Freshwater 50719

  • ELECTRIC MOTOR - Our Protruar Transom 24V 5HP Trolling Motor system is designed and engineered to run efficiently than ever before. It is so quiet that the fish will never hear you coming. There are variable speed functions that let you dial in your desired speed to provide more precise and smooth adjustments, as well as improve control of the motor. Rest easy and spend more time catching and less time chasing the fish with Protruar Transom, a trolling motor with all the power you need!.
  • SPEED CONTROL – Featuring digital technology built into this motor system that provides a stepless forward movement and reverse speed control, all from the handle. No more protruding foot pedals with Protruar’s advanced stepless speed controller that you can access easily with your hands. With a smart user interface like this, it will make fishing trips super easy and more convenient..
  • FOLDING & TILTING - The Protruar has a trolling handle with the folding functions that can fold at an angle of 180 degrees and an expanding handle extension with 400mm length. It also offers 7 levels of motor tilting positions. These full motor pilot control features enable you with a lot of flexibility to regulate speed, propulsion, and steering so you can fish and boat around from ....
Check Stock

Newport Vessels 55lb Thrust Electric Kayak Trolling Motor with Kayak Mount Set

  • FISH INSTEAD OF PADDLE: Get right on top of the big fish with this trolling motor and mount kit from Newport Vessels and you’ll be catching more....
  • MOTOR: The ultra efficient Newport Vessels 5-star rated Kayak Series 55lb Electric Trolling Motor will keep you fishing longer in fresh or saltwater.....
  • MOUNT: The Railblaza Kayak Transom Mount uses two sturdy StarPort HDs to securely outfit your kayak, this tested design can quickly be removed in....
  • INCLUDES: All necessary hardware is included in kit. Install the Railblaza Transom Mount on your kayak, bolt on Newport Vessels Trolling Motor, add a....
  • EEASY TO USE: Switch from paddle only, to motor ready in less than 30 seconds!.
Check Stock

Five Oceans FO4203 Marine Boat Adjustable Outboard Motor Bracket, Heavy Duty, AISI316 Stainless-Steel Fine Polished for 2 and 4 Stroke Outboards Up to 130lbs 60kg, White Poly Mounting Board 25HP

  • Heavy-duty structure made of AISI3616 polished stainless steel. Extra-wide 10-1/4 inches x 7-1/2 inches white poly mounting board for the new wider style motor locking clamps. Transom Plate Measures: 4-3/8 inches x 4-7/8 inches.
  • They are designed for 4-stroke engines. Accommodates long or short shaft motors. New, ergonomically designed twist lock safety knobs secure bracket in place.
  • Suitable for motors up to 25HP with a maximum weight of 130 pounds. Designed to resist the harsh conditions of the marine environment. Ideal for Fishing, Pontoon, small power, sailing boats.
  • Built especially for new four strokes, heavier, high torque motors. Allows you to raise and lower trolling and auxiliary engines with ease.
Check Stock