Categories

Best Truck Air Brake Line Kit

Trackon Parts 12 Ft. 3-in-1 Wrap Set, ABS Electrical and Rubber Air Line Hose Assemblies, for Semi Truck Tractor Trailer

  • TWO 3/8" ID RUBBER AIR LINE BRAKE HOSES : Color-coded large grips and 1/2" swivel fittings with color indicators.
  • ONE 7-WAY ABS ELECTRICAL GREEN CABLE : Industry standard zinc die-cast SAE J560 plugs with cable guards.
  • WRAPPED, NOT TANGLED : Heavy-duty spiral wrap combines all components into one bundle for easy management and cleaner appearance.
  • HANGER BRACKET WITH CLIP: a durable complement to this superior semi truck air line kit with a power line..
  • COST-EFFECTIVE UPGRADE: better than buying parts separately..
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • ... and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fittings Kit: The air brake fittings contain 34 pcs. 10 PCS: Male Connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: ....
Check Stock

Ailbiuko Semi Air Lines Kit, 15FT 3-in-1 Airline Hose for Truck ABS 7 Way Electrical Cable with Glad Hands Hex Gladhand Handles Grips for Tractor Trailer

  • 【INCLUDE】- 15 Ft 3 in 1 ABS 7 Way Electrical Cable and Rubber Air Line Hose Wrap Assembly: [TRUCK/TRAILER CABLE for ABS SAE J2394 - 4/12-2/10-1/8 -65°C/-85°F (Green)] - [AIR BRAKE SAE J1402 A DOT TYPE S 3/8 I.D. (Black)] - [SAE J560 for Plug].
  • 【REPLACe】- 3 in 1 Semi Truck Power Cable: 302171,30-2171,11-8115.
  • PE13050. Glad Hands: Velvac 035042 035045, Tectran 1011EF 1011SF, Bendix 278850 278851, etc.Gladhand Grips: 12-600, etc..
  • 【7-WAY PLUG】- SAE J560 for Plug. Use the industry-standard zinc die-cast plug to efficiently transmit power from the engine to your trailer/truck. 7 Way electrical cable uses real high-quality copper so it has good thermal conductivity and electrical conductivity, ensuring the normal use of lights such as turn signals and brake lights during driving..
  • 【SPRING JOINT】- More durable, joint is not easy to damage. Brass connector: good anti-corrosive and anti-rust properties. .
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

ANRIWT Air Brake Line Fittings,1/4" DOT Air Fittings Brass Push in Fitting, Push to Connect Union Fittings, Air Brake Union 1/4" Tube OD for Trucks Trailers Use and Industria Workshops (4 PCS)

  • ... by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
  • 【TYPICAL APPLICATION】：Air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, industrial workshops, air brake connections,towing machine hose connection and air brake connections or lawn mower repair..
  • 【PRESSURE RANGE】: Air brake fittings working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).
  • 【QUALITY GUARANTEE】: The air brake fittings with corrosion resistance, high temperature ductility and low permeability. Great for long time use .If you encounter problems can contact us at any time,we will try my best to solve your problems as soon as possible until you are satisfied..
Check Stock

OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle w/ Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding (Packaging May Vary)

  • RELIABLE BRAKE BLEEDING TOOL: Our brake fluid bleeder kit features a reliable magnet for one-man operation.
  • Designed for use on calipers, wheel cylinders, and master cylinders to give you the most effective brake line bleeder kit for your budget.
  • NO MESS BRAKE BLEED: Get a tight fit over calipers with our tapered fittings and transparent brake bleeder hose of our brakes bleeder.
  • The transparent brake bleeder tubing ensures that you’ll know when the brake line is running clear and air-free.
  • ONE MAN OPERATION: No need to use the two-person method for your brake bleed.
  • Attach the one person bleeder's reservoir to the rotor or similar metallic vehicle surface with the strong magnetic attachment and pump the brake.
  • DURABLE BRAKES BLEEDING KIT: The quality construction of our 2 piece design gives you a durable no-mess operation.
  • Bleed brakes while keeping everything clean of caustic brake fluid.
  • Our handy reservoir makes disposal of brake fluid quick and easy.
  • FITS MOST VEHICLES: Our specially tapered fittings work on most vehicles.
  • The hoses hold firmly to the durable brake bleeder bottle and tapered fittings to create a no-mess operation that keeps your components clean of brake fluid.
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

  • ...bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
  • ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
  • WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
  • 90 to 120 PSI (6-8 bar) air supply requirement.
  • 25-ounce (0.75L) approximate refill container capacity.
  • Includes different adapter sizes to accurately fit your application.
  • CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock

HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)

  • ...permeability. Great for long time use, dot air brake fitting pneumatic fittings type: 1/4".
  • 【TYPICAL APPLICATION】：The air brake fittings assortment kit can be used with air systems, copper tubing in air lines brake systems, which is perfect for automotive car or truck repair,air operated seats, operating gauges, air horns, heater controls, industrial workshops, daily garden or lawn mower repair, towing machine hose connection and air brake connections ..
  • 【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
  • 【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).
  • 【Quality Guarantee】: If you have any problems with it ,please feel free to contact us and i will try my best to solve your problems as soon as possible until you are satisfied. We are highly confident....
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
  • Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
  • Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....
Check Stock

Utah Pneumatic 1/4\ Air Line Od 50 Feet SAEJ844 Air Brake Tubing Nylon Air Ride Hose DOT Approved for Air Brake System Or Fluid Transfer 1/4\ Air Hose(1/4\ air hose 50 feet)

  • Standard SAEJ844 Air suspension Horn Train Lowrider air brake tubing 1/4 air line air suspension line 1/4 pneumatic tubing air brake tube.
  • Standard SAEJ844 Air suspension Horn Train Lowrider air brake tubing 1/4 air line air suspension line 1/4 dot airline.
  • Item:PA Nylon hose. Usage:Air brake system,air or fluid transfer use with Air brake hose 1/4 dot tubing.
  • Size:1/4".Pipe Thickness 1mm Bending radius 40mm air horn tubing.
  • Weight 190Gr/10Meter.Material Polyamide air bag hose.
Check Stock

United Pacific 89998 Heavy-Duty Deluxe Truck Cab Air Dust Blow Gun Kit, Coiled Nylon Hose, Extends Over 10ft, DOT/SAE J844, Air Duster - One Unit

  • WHATS IN THE BOX: Included in the order is the following: (ONE) United Pacific Deluxe Truck Cab Air Duster Blow Gun Kit. (NOTE: ONLY ONE Air Duster Blow Gun Kit)..
  • FEATURES: The United Pacific Heavy-Duty Truck Cab Air Duster Blow Gun Kit includes: (ONE) Chrome Plated Blow Gun with two interchangeable nozzles and a brass T-compression fitting for splicing into air-seat air supply line. The complete kit was crafted to be used on trucks using the on-board air supply to blow dust and debris off the interior instruments..
  • SPECS: Our United Pacific Heavy-Duty Truck Cab Air Duster Blow Gun Kit meets DOT and SAE J844 Type-A specifications. The coiled NTA nylon-12 hose can extend over 10 feet and can be useful within the interior cabin to dust off any surface. This convenient tool is a must have for your truck to keep things neat and tidy..
  • WHO WE ARE: We are unique individuals whose varied talents and experiences bring value to the way we connect with big rig drivers and car enthusiasts, and the world. With over 30 years of experience, were dedicated to the design, manufacturing and supply of automotive products for heavy-duty trucks and classic cars.
  • UNITED PACIFIC: United Pacific has a large library of aftermarket parts and accessories from our classic car de....
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock