Best Truck Flywheel

OTC 5015A Truck Clutch and Flywheel Handler

• OTC's Truck Clutch & Flywheel Handler turns clutch replacement from a back breaker to a simple one person job.
• Handles 14 inch and 15-1/2 inch clutch assemblies weighing up to 150 lbs.
• Swivel casters and a 9 inch to 37 inch lifting range provide supreme manueverability during installation - allowing precise alignment of the clutch assembly to the back of the engine.
• Includes a 2 inch splined shaft with a 1-1/4 inch pilot to aid in alignment.
• high-grade materials ensure quality performance over the lifetime of the tool.

JONNESWAY AI050107 Viscous Fan HUB Spanner 41mm for GM OHC-Engines.

SR Performance Clutch Alignment Tool; 10 Spline

• OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
• Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
• Rugged construction will easily support the weight of heavy clutch discs.
• To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
• 1-3/4 inch O.D. shaft, 1 inch pilot, 10 splines.

SchaefflerLuK DMF023 Dual Mass Flywheel OEM Dual Mass Flywheel LuK Replacement Clutch Parts

• OEM Clutch Replacement Kits: Our LuK DMF019 dual mass flywheels suit a huge variety of vehicles! The flywheel is an integral part of your clutch....
• Replacement Flywheel: Today’s tightly packaged clutch systems leave little room for error. The clearance between the disc damper and the....
• LuK Flywheel: The dual-mass flywheel absorbs engine vibrations before they are transmitted to the driveline where they can rattle gears. It has a....
• Dual Mass Flywheel: The primary section of the LuK DMF dampens, isolates engine vibrations and prevents engine torque spikes from damaging the....
• OEM Flywheel: As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. Each OEM part is....

LUORNG 2PCS Freewheel Spoke Protector, Mountain Bike Bicycle Flywheel Guard Bike Wheel Spoke Protector Cover Part, Diameter 164mm

• Easy to install and use, prevent the chain from falling behind the flywheel and reduce the sediment on the flywheel. The perfect design can firmly fix the hub, and the hub is not easy to fall off..
• Usage: This product is used to protect the steel wire installed in the flywheel of the rear wheel. It is suitable for the wheel hub of the disc brake box and the chain protector of the variable speed flywheel of the mountain bike..
• Material: made of high-quality transparent plastic, good toughness, not easy to crack or damage, durable..
• Rotary flywheel guard plate: outer diameter 164mm / 6.46in, inner diameter 37mm / 1.46in, suitable for 34T..
• Package content: 2 pieces of bicycle flywheel spoke protectors..

Dorman 14505 Clutch Alignment Tool Compatible with Select Models

• OTC's 10-Spline Truck Clutch Alignment Tool is designed for use when installing heavy-duty single, two-plate, push/pull, manual, and self-adjusting clutches.
• Tool is constructed of lightweight fiberglass-reinforced nylon that won't hang up in clutch disc splines.
• Rugged construction will easily support the weight of heavy clutch discs.
• To use, loosely install clutch disc and pressure plate on flywheel then insert alignment tool through the clutch into the bearing, center disc, then tighten pressure plate to spec.
• 2 inch O.D. shaft, 1-1/4 inch pilot, 10 splines, splines are 3.6 inches long.

LUORNG 2PCS Freewheel Spoke Protector Diameter 138mm Bicycle Flywheel Guard Bike Wheel Spoke Protector Cover Part for Mountain Bike Road Bike

• Easy to install and use, prevent the chain from falling behind the flywheel and reduce the sediment on the flywheel. The perfect design can firmly fix the hub, and the hub is not easy to fall off..
• Usage: This product is used to protect the steel wire installed in the flywheel of the rear wheel. It is suitable for the wheel hub of the disc brake box and the chain protector of the variable speed flywheel of the mountain bike..
• Material: made of high-quality transparent plastic, good toughness, not easy to crack or damage, durable..
• Rotary flywheel guard: outer diameter 138mm/5.43in, inner diameter 37mm/1.46in, suitable for 28T-34T..
• Package content: 2 pieces of bicycle flywheel spoke protectors..

EWK 36mm 3/4 Inch Flywheel Locking Holder Water Pump Holding Tool 12 Pt Socket for Duramax 6.6L Engine

• 【 Exclusive Design 】The set is designed for quick water pump replacement. Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
• 【 Time Saver 】Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Easy to install and effectively keep the flywheel from turning..
• 【 Easy to Use 】 Locks the flywheel easily to the transmission when changing water pump. The flywheel locking tools work with Duramax 2500 / 3500 pickups and 4500 / 5500 trucks..
• 【 Heavy Duty 】Comes with flywheel holder OEM no.AM-J-44643-A, AM-J-44643-B, and 36 mm 12 point socket. Constructed of quality CR-V Steel with a manganese phosphate coating to resist rust and corrosion..
• 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..

LUORNG 2PCS 135mm Mountain Bike Bicycle Flywheel Guard Bike Rear Wheel Spoke Protector Cassette Spoke Protector Freewheel Spoke Protector

• Function: the flywheel guard plate is used to protect the steel wire installed in the flywheel of the rear wheel..
• Size: Outer diameter 135mm/5.31in, suitable for cassette hubs with hub lugs diameter of 54mm/2.13in. The three-claw guard can also fit the cassette V-brake hub, but the actual use depends on the diameter of the hub lug..
• High performance: the three claw design can firmly fix the hub, and the hub is not easy to fall off..
• Easy to use: it is installed in the flywheel of the rear wheel to protect the steel wire, prevent the chain from falling onto the back of the flywheel and reduce the sediment thrown onto the flywheel..
• Package content: 2 pieces of clip type three claw bicycle flywheel spoke protector. Be sure to check the data before purchasing. The diameter of flower drum ear piece is 54mm / 2.13in..

AYNEFY Bike Flywheel Support,Spoke Protector, Mountain Bike Bicycle Flywheel Disc Brake Cassette Hubs Protection Cover Part Mountain Bike MTB Disc Brake Cassette Hubs Protection Cover Tool

• Bicycle flywheel bracket: made of high-quality transparent plastic, with good toughness and not easy to crack or damage. It is only applicable to the disc brake box hub. Four claw design, the hub is firmly fixed and not easy to fall off..
• Safety: prevent the chain from falling to the back of the flywheel and reduce the sediment on the flywheel. Four claw design, the hub is firmly fixed and not easy to fall off. Good mountain bike accessories..
• Rugged and durable: this bicycle flywheel spoke protector is made of high-quality transparent plastic with good toughness and is not easy to crack or damage. It is easy to install and use. It is a good accessory of mountain bike.
• Transparent material: the spoke protector is made of high-quality transparent plastic with good hardness and is not easy to break or damage. Prevent the chain from falling to the back of the steering wheel and reduce the sediment on the steering wheel.
• Four claw design: the tape spoke protector is only applicable to the tape hub with disc brake. The bicycle flywheel bracket can prevent the chain from falling behind the flywheel and reduce the accumulation on the flywheel..

QISF 2Pcs Magneto Flywheel Puller 24mm & 27mm and 20mm & 24mm Clutch Lock Nut Spanner Tool for Motorcycle ATV Dirt Bike Scooter Repair Tool

• 【Function】-- Clutch plate hub nut spanner tool designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.Another Used for removal of the flywheel or rotor if applicable..
• 【Fits】 Flywheel Puller for GY6 50CC 125CC 150CC Yamaha Honda Suzuki KTM ATV scooter dirt bike.
• Clutch lock tool for 50cc-125cc Honda Motorcycle ATV Dirt Bike Go Kart Pit Bike 4 Wheeler.
• 【Flywheel puller Size & Material】-- Stator magneto flywheel puller with 2 sizes:24mm&27mm.
• 【Clutch lock Size】-- Clutch lock tool Inner Diameter(upper): 20mm.
• 【Package includes】-- 1×Magneto Flywheel Puller, 1×Clutch lock tool.

vanpro DIY Electric Skateboard Brushless Motor Mount Bracket /80MM 90MM 97MM 100MM Pulley Wheel KIT Belt 5M

• Please note that it is only suitable for square truck rods..
• The aperture of the small synchronizing wheel: 8MM/0.315 IN (please confirm whether the diameter of the motor shaft is 8MM)..
• Please confirm whether the hole pattern of the PU wheel is suitable, the cruiser flywheel, diameter: 83/90/97/100MM, width: 52MM. 6 rectangular wheel....
• only suitable for 50 series (5065) brushless motor, hole-fixing spacing of flat screws on motor shaft end: Φ30.0* 30.0..
• 5M HTD Belt, width: 10MM, circumference: 255MM, pulley wheel ratio: 36/12 5M HTD..

Shorty's Skate Tool The Wench

• Fitment: Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions..
• Function: Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement..
• Duramax 2500 / 3500 Pickups (Toothed pieces only): Removes metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel..
• Duramax 4500 / 5500 Trucks (Toothed pieces with screws): Remove the rubber inspection cap on the bottom of the transmission. Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place..
• 36mm 12-point Socket: Use with 3/4" square drive to remove harmonic balancer bolt and retorque on installation. 36mm 12 point socket can also be used on axle..