Categories

Best Trunnion Mount Cylinders

NEW SOUTHWEST SPEED RACING BRAKE & CLUTCH PEDAL ASSEMBLY WITH MASTER CYLINDERS & BALANCE BAR, REVERSE SWING MOUNT, SHORT 5 TO 1 RATIO

  • Brand New Southwest Speed Short Reverse Swing Mount Brake & Clutch Pedal Combo Kit With 3 Aluminum Master Cylinders (SWS Part # 301-2663). This combo is very similar to the Wilwood Part # 340-4828X3, only about $50 cheaper..
  • Southwest Speed High Volume Aluminum Master Cylinders | * High pressure die-cast from high-grade aluminum, fully machined and assembled with extreme precision * Features the highest fluid capacity of any integral reservoir design * With a total capacity of 8.2 ounces, there is at least 26% more fluid than most competitive brands * More fluid volume means cooler temperatures and additional insurance for extreme conditions where high pad wear can compromise fluid levels during long runs.
  • Kit includes: | * 1 - Reverse swing mount dual pedal, short design, 5:1 ratio (# 301-266) * 1 - Aluminum clutch master cylinder, 3/4" bore (# 301-290) * 1 - Aluminum brake master cylinder, 7/8" bore (# 301-291) * 1 - Aluminum brake master cylinder, 1" bore (# 301-292).
  • Find more Pedals as well as many other high performance auto parts by visiting the Southwest Speed Amazon Store..
  • Southwest Speed Dual Brake and Clutch Pedal | * This pedal assembly combines the brake and clutch pedals together in one unit and positions the master cylinders inside t....
Check Stock

Laguna Tools 110v 1.75hp Bandsaw with 12” Resaw and 38” Table Height - Model mband14bx110-175, Black

  • 12" Resaw | height: 70 1/4" 21 1/2" X 16" | table height: 38".
  • 7Degree table tilt left | 2 x 4" Dust ports | blade length: 115" | cast iron wheels.
  • Magnetic starter | dual light mount | 45Degree table tilt right max. | blade width: 3/4" | pyramid-shaped spine.
  • Min. Blade width: 1/8" | Footprint: 17 1/2" X 22 1/2" | Quick release tension | magnetic blade guard.
  • Laguna Ceramic Guides | Hi/Low aluminum Fence | Worm Gear Rack & Pinion | Massive Cast Trunnion 8"X13".
Check Stock

Dometic SeaStar Seal Kit HS5157 with Wrench

  • Replacement front seal kit for SeaStar pivot / front mount cylinders.
  • HS5157 kit contains: (2) Seal Glands, Pin Wrench, Seal Gland Assembly Guide Tool.
  • Fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445,....
Check Stock

Husky Liners Gearbox Storage Systems | Under Seat Storage Box - Black | 09421 | Fits 2019-2022 Dodge Ram 1500 Crew Cab w/o Factory Storage Box 1 Pcs

  • Precision-cut 11 gauge, 304 grade stainless steel mount easily installs on the trailer tongue frame to store weight distribution spring bars when not in use..
  • This frees up storage compartment space, and keeps the greasy parts outside and off the ground..
  • Installs above or below the trailer tongue frame as space permits..
  • 304 grade stainless steel resists corrosion and looks great..
  • Fits round bars, trunnion bars, and Equalizer type square bars. Install with stainless steel, self-drilling fasteners.
Check Stock

Michigan Motorsports LS1 LS3 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 LSX LQ9 LS2 LS3 LS7 Trunnion

  • Includes 16 Trunions, 32 Bushings, 32 Circlips.
  • Fits all OEM LS Rocker Arms. Replacement Trunnion Kit for LS Engines.
  • Micro-polished hardened shafts with C932 bearing bronze bushings.
  • LS1 Rocker Arms Bushing Trunion 4.8 5.3 5.7 6.0 6.2 LSX LQ9 LS2 LS3 LS7 Trunnion.
  • Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

WP9870163 9870163 Power Nut Kit - Compatible Kenmore KitchenAid Whirlpool Trash Compactor Parts - Replaces AP6014316 750668 PS11747554 - Made of Sturdy Materials Upgraded Model

  • WP9870163 Trash Compactor Trunnion Nut - A high-quality exact equivalent for part numbers AP6014316, 9870163, 11100017, 14211376, 41001087, 750668, PS11747554..
  • Compatibility with major brands - 9870163 Trash Compactor Power Nut Kit is compatible with Whirlpool, Jenn-Air, Kenmore, KitchenAid, and Maytag appliances. It fits hundreds of models..
  • Quick DIY repair - WP9870163 Trunnion Power Nut Kit for Ram Drive Screw will help if your compactor ram gets stuck or your appliance is noisy. Wear work gloves to protect your hands during the repair..
  • Attentive support - If you are uncertain about whether the nut fits your trash compactor, we will help. We generally put forth a valiant effort to guarantee you are totally happy with your purchase..
  • High-quality elements - Garbage Compactor Nut Kit meets or exceeds all manufacturer specifications. We provide a 365-day return policy and guarantee 100% money back..
Check Stock

Zebra DNA Luxfer L6X Aluminum CO2 Tanks with CGA320 on/off Valve (Natural, 5 LB)

  • Cylinders are made from Luxfer’s exclusive L6X® alloy, a proprietary version of 6061-T6 specially optimized by Luxfer metallurgists to improve its durability, fracture toughness and resistance to tearing and cracking. More than 40 million L6X cylinders in service around the world have an exemplary record for safety and dependability..
  • Highly corrosion-resistant interior and exterior—ideal for wet gases.
  • Cylinders perform well at low temperatures..
  • Lightweight––up to 40 percent lighter than comparable steel cylinders..
  • Cylinders meet or exceed all regulatory standards worldwide..
  • Luxfer’s exclusive “Safety First” training program that provides manuals, inspection guides, safety bulletins, reference materials, shop posters, videos and other training materials free of charge to promote safe use, storage and inspection of aluminum beverage cylinders. Consistent with Luxfer’s position as the world’s leading manufacturer of high-pressure aluminum gas cylinders, educational offerings are available in multiple languages and formats..
  • Cylinders cycle-tested in excess of 100,000 cycles at service pressure..
  • Minimum burst pressure tested to 2.5 times service pressure without failure....
Check Stock

Dometic Baystar Hydraulic Steering Kit, HK4200A-3

  • Gives 5 wheel turns lock-to-lock when using BayStar outboard cylinders.
  • Kit Includes: (1) BayStar helm pump (HH4314-3) (1) BayStar cylinder (HC4645H) (2) Hydraulic steering fluid (HA5430) (1) Filler kit (HA5438).
  • Also includes (1) BayStar tubing kit (HT4420H, 2 x 20' hoses).
  • Dn not use BayStar on smaller HP outboard engines that use wing nut type transom mount clamping screws.
Check Stock

MOSTPLUS 11127522159 Engine Valve Cover w/Gasket Hardware LH Driver Side Compatible for BMW 5 6 7 Series X5 Cylinders 5-8

  • Fitment: Compatible with 2004-05 BMW 545i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 550i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2004-05 BMW 645Ci Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2006-10 BMW 650i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745i Driver Side Cylinders #5 - 8 Valve Cover.
  • Compatible with 2002-05 BMW 745Li Driver Side Cylinders #5 - 8 Valve Cover.
  • Package Includes: 1 x Engine Valve Cover Set(.
Check Stock

Motorsport Products 60-1002 MX Engine Stand

  • Can be used with almost all vertical-type single cylinder 2- or 4-stroke motorcycle engines (will not work with lay-down engines/ horizontal cylinders).
  • Frame assembles quickly with no tools needed, breaks down in just seconds for compact storage.
  • Swing frame allows engine to tilt to eight different angles, allowing engine to be at the correct position for any job.
  • Spring-loaded, quick lock pin allows tilt angle to adjust quickly with engine mounted.
  • Engine will mount to either side of the swing frame, allowing access to work on right or left side of the engine.
Check Stock

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

  • ... doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed..
  • Comes with four 10mm ball mounts for alternate 'other than truck camper shell' applications, such as in camper / canopy windoors, RV doors and awnings, boat hatch spring lifts, gas struts for cabinets, storage bed lifts, toolbox struts, etc. These gas shock lift supports CANNOT be compressed by hand. These gas props MUST be installed in the EXTENDED / OPEN position. It is nearly impossible to install them in the CLOSED position. Please refer to the install video f....
Check Stock

99.999% by Volume Nitrogen Calibration Gas, 17 Liter Steel Cylinder.

  • WIDE RANGE OF COMPATIBILITY: Most calibration accessories are designed for use with more than one instrument. Calibration cylinders are also conveniently compatible for use with the GALAXY GX2 Test System so they fit easily with other components and ensure a comprehensive safety evaluation.
  • MULTI-GAS TANK: The calibration gases within the cylinder are 1.45 % CH4 (Methane), 15% O2 (Oxygen), 60 PPM CO (Carbon Monoxide), 20 PPM H2S (Hydrogen Sulfide).
  • RECYCLABLE CYLINDER: MSA promotes recycling of Model R, Model RP, and Econo-Cal Calibration Cylinders. The calibration gas recycling program benefits a non-profit organization where cylinders are not refilled.
  • they are salvaged for scrap. Simple recycling instructions are included with every eligible cylinder..
  • RFID-TAGGED FOR EASY TRACKING: RFID technology and software offer convenient setup, recordkeeping, automatic calibration cylinder recognition, cylinder pressure, expiration warnings, and status of multiple cylinders simultaneously.
  • SAFETY & COMPLIANCE: All MSA calibration gas is supplied with individual Certificate of Analysis to NIST-traceable standard and MSDS. Cylinders, testing systems, and detectors also meet all applicable OSHA regulations and follow relevant safety standards in markets they ....
Check Stock

Belinlen 10 Pack Plastic Cylinders and Beakers Set, Including 5 Pack Clear Plastic Graduated Cylinders (10, 25, 50, 100, 250ml) and 5 Pack Plastic Beakers Set (50, 100, 250, 500, 1000ml)

  • Package Contains: 16 Pack Cylinders and Beakers Set. (5 sizes clear plastic cylinders, 5 sizes transparent plastic beakers, 5 Transfer Pipettes and 1 Test Tube Brushes)..
  • Size detail: plastic cylinders set- including 10, 25, 50, 100, 250ml, and plastic measuring cups-including 50, 100, 250, 500, 1000ml. Transfer Pipettes: 3ml..
  • Material: made of food grade thickened pp plastic, more resistant to corrosion, non toxic, durable and safe to use..
  • Special design of clear graduated lines on both cylinders and beakers which help you easily measure liquids while transferring them..
  • These cylinders and beakers sets are perfect for homeschool science experiments, students or tearchers doing chemical experiments in the lab, also great for kids Halloween costume. Nice not having glass to worry about breaking..
Check Stock