Categories

Best Trunnion Mounted Ball Valve

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life..
Check Stock

SR SUN RISE 10 Inch Shower System Handheld Showerhead & Rain Shower Combo for Easy Reach 1.8 GPM Shower Faucets Sets Complete Shower Fixtures with Valve and Trim kit, Brushed Nickel

  • ... built-in Shut Off Stops to effectively prevent water hammer noise and control the water pressure. Pressure balance valve's cartridge monitor water pressure balance, helping to protect you from being scalded by sudden changes in hot or cold water pressure..
  • Pop-Up Water Diverter: Located on the bottom of the surface mounted, easy-access diverter location. Press to switch between handheld and rain shower. Robust all-brass body ensures long life..
  • Durable Material: The shower head with handheld is constructed from brushed nickel plated ABS material which is non-toxic, durable and lightweight. The adjustable swivel ball joint and stainless steel hose give you a larger shower area..
  • You Will Get: 10 Inch Rain Shower Head(ABS with Brass Ball Joint), 7 Settings Hand Shower(ABS), Rough-in Valve and Trims(Solid Brass), Pop-up Diverter (Solid Brass), Adjustable Slide Bar and Shower Holder (304 SUS, ABS), Shower Arm and Surface Mounted (304 SUS), 71 Inch Shower Hose(304 SUS) and Accessories Required for Installation..
Check Stock

SR SUN RISE Shower System with 3-spray Rain Shower and 6-Setting Handheld Combo 1.8 GPM Shower Faucets Sets Complete with Adjustable 27.6\ Slide Bar Shower Fixtures Valve Include, Matte Black

  • ... built-in Shut Off Stops to effectively prevent water hammer noise and control the water pressure. Pressure balance valve's cartridge monitor water pressure balance, helping to protect you from being scalded by sudden changes in hot or cold water pressure..
  • Pop-Up Water Diverter: Located on the bottom of the surface mounted, easy-access diverter location. Press to switch between handheld and rain shower. Robust all-brass body ensures long life..
  • Durable Material: The shower head with handheld is constructed from brushed nickel plated ABS material which is non-toxic, durable and lightweight. The adjustable swivel ball joint and stainless steel hose give you a larger shower area..
  • You Will Get: 10 Inch Rain Shower Head(ABS with Brass Ball Joint), 7 Settings Hand Shower(ABS), Rough-in Valve and Trims(Solid Brass), Pop-up Diverter (Solid Brass), Adjustable Slide Bar and Shower Holder (304 SUS, ABS), Shower Arm and Surface Mounted (304 SUS), 71 Inch Shower Hose(304 SUS) and Accessories Required for Installation..
Check Stock

Michigan Motorsports LS1 Rocker Arms with upgraded Bronze Bushing Trunion Kit Includes LS1 Rocker Arm Support Pedestal Stands Pair 4.8 5.3 5.7 6.0 LS1 LS2

  • Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with upgraded Trunion Kit is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo. LS Rocker Arms feature our BUSHING TRUNNION KITS. The Bushing bearing operate smoother and can operate at a higher RPM than even the caged bearing style upgrade..
  • The bushing design provides superior lubrication to the trunnion while also providing maximum load capability. Our innovative design prevents premature failures caused by the weak O.E. or replacement needle bearings, eliminating the possibility of debris from a bearing failure that can cause severe engine damage. Our special C932 bushing material is bathed in oil via grooves at 2 different locations on the trunnion..
  • These channels constantly feed oil to the bushing surface ensuring proper lubrication. The greater surface of our bushed trunnion will support 300 times more load than a needle bearing trunnion. Our bushing gets more lubrication and has less load applied to it than the bushing in the small end of a connecting rod, giving it long service life. Includes two stands - enough for both heads.
Check Stock

LTWFITTING New Brass Drain Cock 1/4 NPT Air Ride Suspension (Pack of 5)

  • MULTIPURPOSE DRAIN: Can be used on intercoolers, aftercoolers, filters, dryers, wet receiver tanks, drip legs or at multiple points of use.
  • ADJUSTABLE DISCHARGE CYCLES: Open drain cycle of 0.5-10 seconds.
  • DURABLE DESIGN: Features built-in strainer, ball valve, viton seals, brass body, stainless steel internals and 6-foot heavy-duty power cord.
  • EASY INSTALLATION: Installs quickly to existing filters and lines.
  • Allows drain valve to be mounted higher than the 18" mandatory height requirement in automotive shops.
Check Stock

JET JWBS-15 15-Inch Woodworking Bandsaw 1-3/4HP 1Ph 115/230V 714600

  • Toolless Adjustments: Independently adjustable, upper and lower ball bearing guides.
  • Optimum Blade Support: Rigid, four-sided guide post with rack and pinion adjustment.
  • Three Heavy-Duty Tensioning Settings: Full tension, partial tension, and full release.
  • Maximum Support and Stability: Cast iron trunnion and precision-ground cast iron table.
  • Smooth and Easy Adjusments: Cast iron handwheels and ergonomically-designed knobs.
Check Stock

POP SANITARYWARE Shower Only Faucet Set Brushed Nickel, Bathroom Rain Mixer Shower Head Set Wall Mounted Rainfall Shower System Single Handle Shower Trim Kit with Rough-in Valve

  • LUXURY DESIGN: Swivel ball allows you to adjust the angle of the showerhead to suit your preference..
  • ALL METAL MATERIAL: Solid brass rough-in shower valve body, Stainless Steel shower head and brass ceiling mounted shower arm..
  • cUPC CERTIFIED: ASME A112.18.1-2018/CSA B125.1-18 with 1/2" NPT thread on both shower arm and valve body..
  • INCLUDES: 8" Stainless Steel shower head, shower arm, shower mixer valve. California CEC list (1.8GPM 6.8L/MIN). CUPC certification, Products are in compliance with the following standard(s): ASME A112.18.1-2018/CSA B125.1-18.
  • LIFETIME LIMITED WARRANTY: Any product quality problem can be guaranteed within 5 years. The shower cartridge is permanently replaced free of charge..
  • IMPORTANT WARNING: Not compatible with other brand‘s shower faucet valve and cartridge. The old shower valve must be removed if install this kit..
Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

Brian Tooley BTR Trunnion Kit V2 Rocker Arm Trunion LS1 LS3 4.8 5.3 5.7 6.0 6.2

  • BTR Trunnion Kit V2 Rocker Arm Trunion Kit. The all new Trunnion Kit V2 features a Trunnion with pre-installed inner race bearings..
  • The V1 kits have stood up to an enormous amount of abuse, but BTR decided to upgrade the to a pressed inner race comprised of 52100 Heat Treated Bearing Steel, over the more commonly used 8620 Carburized Steel found in our V1 kits and many OEM applications..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • Additionally, these feature a self oiling axle with priority feeding to the Trunnion itself..
  • FOR LS1/LS3/99-13 LS TRUCK STYLE ROCKERS. Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

  • 【100% No-risk Purchase】If you receive any problems with pressure washer ball valve, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
  • 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
  • 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
  • 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to ....
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • BRINGS CONVENIENCE AND SAFE - The biggest advantage of using a pressure washer shut off ball valve kit is changing the implements safely and conveniently during cleaning. It allows you to switch from your surface cleaner to the gun or wand assembly without running back and forth to your engine to shut it down and release the pressure in the hose. When you maneuver about cleaning with a wand, it also helps to relieve fatigue..
  • 3/8” QUICK CONNECT - This is a professional pressure washer shut off ball valve kit that includes a ball valve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage un....
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock