Categories

Best Truss Head Screws

Stainless Steel Lath Screws, 8 x 1-5/8, Sharp Point Modified Truss Head Phillips Drive (Quantity: 100) Type 17 Cutting Point 305 (18-8) Stainless Steel, Length: 1-5/8 (1.625) in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

Stainless Steel Lath Screws 8 x 1-1/4 Sharp Point Modified Truss Head Phillips Drive Quantity 1000 Type 17 Cutting Point 305 18-8 Stainless Steel Length 1-1/4 1.25 in.

  • Wire-Lath Modified Truss Head Screws for Fastening metal lath to wood. IDEAL for ALL applications where a larger bearing surface is needed underneath the head. HEAD DIAMETER is 0.42 Inches. #2 Phillips Drive.
  • ATTACHES WOOD OR LIGHT GAUGE METAL - Superior penetration through a variety of woods and thin metals.
  • REDUCES WOOD SPLITTING - ELIMATES NEED FOR PRE-DRILLING - This thread cutting screw is ideal for use with wood.
  • it offers a coarse tapping screw thread as well as a special long sharp point that is fluted in order to capture chips. The patented thread design and Type 17 point make drilling faster, reduce splitting, and allow these screws to be driven into most hardwoods without pre-drilling ..
  • HIGH DEGREE CORROSION RESISTANCE: Passivated and Waxed Stainless Steel Type 305 (18-8). HIGH QUALITY STAINLESS STEEL: These #8 Wood Screws are high quality grade 18-8 Stainless Steel, giving the screws one of the highest forms of corrosion resistance and strength, making it last longer than other hardware on the market today. For use in Non-Magnetic environments.
  • MODIFIED TRUSS HEAD - The rounded head top is much lower and flatter while the width of the head is wider, than pan or round screws of the same nominal size. The modified truss is basically a tru....
Check Stock

#8 x 1/2 Stainless Truss Head Phillips Wood Screw 100pc 18-8 304 Stainless Steel Screws by Bolt Dropper

  • 【High Quality Stainless】These Truss Head Screws are made of 18-8 (304) Stainless Steel which is one of the highest forms of corrosion resistant metals, making it last longer than other hardware on the market today..
  • 【Screws That You Can Depend On】Our Truss Head Wood Screws are very strong and are great for both indoor and outdoor use. This stainless is superior to regular steel and provides excellent rust resistance..
  • 【Great To Keep Around】Bolt Dropper stainless hardware is great to have around for use in wood and wet environments. Bolt Dropper stainless steel screws are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion resistant and will support all of your projects..
  • 【Dimensions】Diameter: #8 | Length: 1/2" | Thread Type: Coarse (standard) | Head: Truss | Drive: Phillips #2 | Quantity: 100 pcs | Material: 18-8 (304) Stainless Steel..
  • 【Lifetime Guarantee】We are so confident that our stainless steel screw products are the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock

El Tornillo Y La Tuerca

  • √ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
  • √ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2", 25pcs 8-32*3/4", 25pcs 8-32*1/2", 100pcs flat washers, 100pcs nuts.
  • B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2", 25pcs 6-32*3/4", 25pcs 6-32*1/2", 100pcs flat washers, 100pcs nuts.
  • √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
  • [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
  • √ [Come With A High Hardness Storage Box, Easy To Use And Stor....
Check Stock

Glarks 120Pcs #8 x 5/8\ Phillips Modified Truss Head Wood Screws, Black Zinc Plated Carbon Steel Self Tapping Sheet Metal Screws Set

  • ♛【Package Includes】: You'll receive 120pcs #8 x 5/8" modified truss head wood screws in total. Sufficient quantities are enough for your different daily use at home and office..
  • ♛【High Quality Material】: Our truss head self tapping wood screws are made of high quality carbon steel, black zinc plating gives screws higher corrosion resistance and rust resistance for long service life, not easy to break or deform, and can fit different indoor and outdoor environments..
  • ♛【Sharp Tip Design】: This phillips truss head self tapping screw with sharp tip and deep thread can easily penetrate a variety of materials and achieve tight connecting, which provides better holding power to get the job done easily..
  • ♛【Easy to Use】: No need to pre-drill or drill hole, simply use self-tapping screw to rotate into the product without using nut to cooperate. It can reach a remarkable effect of connecting and fastening..
  • ♛【Wide Application】: These screws can be applied to plastic, wood and soft materials, suitable for repairing fasteners in shops, garages or household furniture. Mainly used in manufacturing, construction, engineering, machinery and other industries..
Check Stock

Glarks 120Pcs #8 x 1-1/2\ Phillips Modified Truss Head Wood Screws, Blue Zinc Plated Carbon Steel Self Tapping Sheet Metal Screws Set

  • ♛【Package Includes】: You'll receive 120pcs #8 x 1-1/2" modified truss head wood screws. Sufficient quantities are enough for your different daily use at home and office..
  • ♛【High Quality Material】: Our truss head self tapping wood screws are made of high quality carbon steel, blue zinc plating gives screws higher corrosion resistance and rust resistance for long service life, not easy to break or deform, and can fit different indoor and outdoor environments..
  • ♛【Sharp Tip Design】: This phillips truss head self tapping screw with sharp tip and deep thread can easily penetrate a variety of materials and achieve tight connecting, which provides better holding power to get the job done easily..
  • ♛【Easy to Use】: No need to pre-drill or drill hole, simply use self-tapping screw to rotate into the product without using nut to cooperate. It can reach a remarkable effect of connecting and fastening..
  • ♛【Wide Application】: These screws can be applied to plastic, wood and soft materials, suitable for repairing fasteners in shops, garages or household furniture. Mainly used in manufacturing, construction, engineering, machinery and other industries..
Check Stock

Xiaoyztan 200 Pcs M3x6 Truss Head Hex Socket Wood Screws Oxide Coated Carbon Steel Self-Tapping Screws

  • PACKAGE - 200 Pcs M3x6mm Truss Head Hex Socket Wood Screws..
  • MATERIAL - Wood Screws are made of premium quality carbon steel, black oxidation treatment surface..
  • FEATURE - Smooth, deep and sharp, that is rapidly for screwing in wood, enhancing the friction between screw and objects to enable the screw lock the wood firmly..
  • AFTERSALES - Please feel free to let us know if you meet any product quality issue, we will try our best to help you..
Check Stock

Stainless 8-32 x 1/2\ (3/8\ to 3\ Lengths Available) Pan Head Machine Screws, Full Thread, Phillips Drive, Stainless Steel 18-8, Machine Thread (100 pcs, 8-32 x 1/2)

  • [♣] Product Name: M4 Truss Phillips Head Screws.
  • [♣] Package: 100pcs x Truss Head Phillips Screws.
  • [♣] Usually used for fasterning pulls knobs..
  • [♣] Sizes: M4x6mm/ 8mm/ 12mm/ 14mm/ 16mm.
Check Stock

MIECOO 17PCS Guitar Truss Rod Allen Wrench Set, Includes 7mm & 8mm Truss Rod Hex Box Wrenches and 4mm, 5mm, 6mm Lengthened Ball End Truss Rod Wrenches Repair Tool and Guitar Spanner Wrench

  • ... easier access to truss rod cavity and easily tighten or loosen the truss rod of your guitar..
  • 【3PCS SILVER LENGTHENED WRENCHES】set of 3 including different size: 4.0mm, 5.0mm, 6.0mm. Reach deep areas easily by using the ball end and apply higher force effortlessly by using the short end. Used to drive bolts and screws with a hexagonal head. Use for locking hexagonal screws, adjusting guitar neck truss rod efficiently, etc..
  • 【GUITAR MULTI SPANNER WRENCH】made of stainless steel & durable. Used to tighten or loosen most nuts or thumb wheels found on guitars, like output jack, control pot, pickup switch, volume control knob, tuning machine head, etc..
  • 【2PCS BALL END TRUSS ROD WRENCHES & 9PCS ALLEN WRENCHES】made of carbon steel & durable. 4mm & 5mm ball end truss rod wrenches are used to adjust the guitar neck straight, suitable for martin acoustic guitar or other guitar which couldn't reach it with a regular hex wrench truss rod adjustment. 9Pcs various guitar allen wrench gauges are suitable for most guitar bass neck, bridge, nut locking, volume knob, bridge string block screw adjustment..
Check Stock

ENGINEER PZ-58 Screw Removal Pliers Extractor Pliers (Combination Pliers), with unique non-slip jaws for quickly removal of damaged or rusted fasteners

  • Squeeze and turn crushed screws, rusted screws, fixed screws, special screws, etc.
  • [Backing] Can also be used for removing gas cans, sorting soy sauce bottles and plastic bottles.
  • International patented tip shape allows for low head screws (truss screws).
  • It has a blade so it can also be cut through wires.
  • Adopts an elastomer soft grip that is environmentally friendly and hand friendly.
  • T-shaped grip section, lighter and more resistant to twisting.
  • [Approximate Screw Removable] Tip job: Screw head diameter 0.1 - 0.4 inch (3 - 9.5 mm) (truss screw: M2 - 4 / Pan screw: M1.6 - 5) / Body jaw part: Screw head diameter 0.2 - 0.4 inch (5.5 - 10 mm) (pan screw: M3 - 5).
  • Product Specifications: Size: 6.3 x 2.1 x 0.6 inches (160 x 54 x 15 mm).
  • Cutting Capacity: Copper wire Φ0.05 inches (1.2 mm).
  • Uses: For maintenance of cars, motorcycles, equipment, bicycles, radio controls, etc.
Check Stock

1/4-20 x 3/4\ Pan Head Machine Screw, Phillips Drive, 304 Stainless Steel 18-8, Bright Finish, Fully Machine Thread, Pack of 50

  • QUALITY: Knob and Pull Screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance. Attach knobs or pulls to cabinet doors or drawer faces.
  • VALUE: No need to run to local Hardware or Big Box Store to look for someone to help you. 25 screws per order..
  • USES: Common project applications: remodeling, fencing, storage, cabinets, framing and DYI projects..
  • How many: 1 pack of 25 Truss head combination Phillips #8-32 x 1-1/2 in..
Check Stock

Knob/Pull Machine Screws 8/32 Thread (25 per Pack) Cabinet Door and Drawer Screws (Choose Your Size) by E.H.C (8-32 x 1 3/4')

  • QUALITY: Knob and Pull Screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance. Attach knobs or pulls to cabinet doors or drawer faces.
  • VALUE: No need to run to local Hardware or Big Box Store to look for someone to help you. 25 screws per order..
  • USES: Common project applications: remodeling, fencing, storage, cabinets, framing and DYI projects..
  • How many: 1 pack of 25 Truss head combination Phillips #8-32 x 1-3/4 in..
Check Stock

K Kwokker 651Pcs #8-32#6-32#2-1/2 Machine Screw Phillips Pan Head Set Screws Assorted Nuts and Bolts and Washers, Cabinet Door and Drawer Screws

  • √ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
  • √ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2″, 25pcs 8-32*3/4″, 25pcs 8-32*1/2″, 100pcs flat washers, 100pcs nuts.
  • B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2″, 25pcs 6-32*3/4″, 25pcs 6-32*1/2″, 100pcs flat washers, 100pcs nuts.
  • √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
  • [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
  • √ [Come With A High Hardness Storage Box, Easy To ....
Check Stock