Categories

Best Tube Clamp

Waynoda 31.8mm Black Bike Seat Clamp Aluminium Alloy Quick Release seatclamp MTB Bike Road Bike Casual Bike Seatpost Clamp ( 2 Pieces )

  • Standard Size: 31.8mm clamp suits for Frame Seat Tube 27.2 mm- 28.6 mm.
  • Material: Aluminum alloy, lightweight,Only about 35g per piece, durable and sturdiness, anodized in Black, colorfast surface, great anti-corrosion.
  • Easy to Install: Ergonomic design,without external key tool, more efficient. Quick release bike seat clamp,make adjusting seatpost height a breeze, super easy to lock and release, and has cutouts for weight savings.
  • Great replacement for bolt and nut clamp style, the seat is secure while also not needing a lot of force to fasten/unfasten the seat clamp.
  • Please Measure Your Seatpost Ture Size: The "31.8" refer to the diameter of the SEAT POST TUBE! Your choice of seat clamp size depends on the frame tube size where the seatpost enters the frame (seat tube).
Check Stock

Lab Clamp 3 Prong Finger with Lab Stand Clamp Holder Boss Head

  • 3 finger lab clamp and black lab stand clip for laboratory use, Hold Test Tube, Flask, Condenser Tube and so on..
  • Clamp Holder Boss Head is large, easy-to-rotate knobs help provide extra leverage to easy and accurate adjustment..
  • 3 finger clamp accepts rods up to 20 mm, 3 prong dual adjust extension clamp.
  • 3 Rubber Coated Prong Jaws Strong die-cast construction,Made of Zinc-alloy Covered jaws for protection and grip,Holds Irregular Shapes Easily.
  • A clamp holder is used for holding a clamp in medical labs and research institutes.Great for stabilizing clamps where you don't need extraordinary support,Excellent laboratory iron clip,an usual clamp accessory in the lab,also suitable for home use..
Check Stock

Beduan Reducer Tri Clamp Ferrule Stainless Steel 304 Sanitary Fitting 2\ Tube OD to 1-1/2\ Tube OD (Pack of 1)

  • Reducer sanitary fitting can be used to connect two pipes of different diameters that are along the same pipe axis..
  • High quality 304 stainless steel, having durable and long service life..
  • Tube OD: reducing 2" tube OD to 1.5" tube OD - (51mm to 38mm tube OD)..
  • Tri clamp size: reducing 2" Tri Clamp / Clover / Sanitary to 1.5" Tri Clamp / Clover / Sanitary - (64mm to 51mm Ferrule OD)..
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access..
Check Stock

Tripod Clamp Mount, Lab Stand Holder Cross Clip, for Experiment Laboratory

  • ADJUSTABLE TONG OPENING: Because of flexible tong opening, the condensing tube clamp can be used in different specifications of the lab instrument..
  • STRONG CLAMPING FORCE: The four-claw lab clamp features strong clamping force, which makes sure that the experiment supplies held by the clamp will not fall..
  • FLEXIBLE HANDLE: The handle can rotate 360 degree, which allows for pouring the chemical solutions easily..
  • FOUR CLAW DESIGN: The beaker clamp adopts four-claw design, which improves its clamping force..
  • APPLICATION: The condensing tube clamp is suitable for clamping various lab supplies such as condenser pipe, flask, etc..
Check Stock

Plastic Hose Clips, Heavy Duty Speedy Double Snap Grip, Nylon Adjustable Fuel Line Air Water Hose Tube Clamp, White, Pack of 10, 9.1-10.2mm

  • WIDE APPLICATIONS ---- The clamp is mainly used to clamp the hoses to regulate the flow or cut off the hoses..
  • HIGH QUALITY ---- The materials used in all our products are of high quality POM plastic, good elasticity, clamping force. These plastic clamp Will definitely meet your needs in the process of use..
  • VARIOUS SIZE ---- In this package, We prepared 4 Sizes Plastic tube clamp clips, Including Diameter 0.4Inch, 0.49Inch, 1.18Inch, 1.37Inch. These siphon hose shut off clamp can Adjusts rate of flow with great precision, Easy to use and very convenient..
  • POWER FUNCTIONS ---- The small two sizes Tube Clamp with single position on/off gives positive shut-off with fingertip control.
  • Use for thin-walled tubing under 3mm (³⁄₁₆") O.D. In addition two Sizes Tube Clamp have a 15-position stepped adjustment that controls flow from full open to complete closure.
  • fits tubing from 8 to 15mm (⅛ to ⁷⁄₁₆") O.D..
  • THE BEST SERVICE ---- If you have any questions during the use of the product, please feel free to contact us, we will help you solve all your problems as soon as possible. To provide you with the most satisfactory shopping experience..
Check Stock

Extraction Proz 50-EXT-30 Glass Extractor Extraction Filter Tube 30' Long 50mm Diameter Clear with Stainless Steel Clamp

  • LAB GRADE GLASS - Made with Borosilicate Glass(Pyrex) Annealed at 1050 F Degrees to remove any stress from the glassware. This will make the glass stronger than poorly annealed or stressed glass..
  • 50mm DIAMETER / 2.0 INCH x 30 INCH LONG - The extra wide tube has more volume than other smaller tubes allowing more material to contained inside the tube. This will reduce the amount of runs needed to process all your material..
  • MADE IN USA - Proudly Hand blown here in Southern California, accept no substitutes. Don't risk your material by saving a few dollars..
  • STAINLESS STEEL CLAMP - The included stainless steel clamp will keep your filter securely in place so you can pack your tube with material and no worry about the filter coming loose. [ DO NOT OVER TIGHTEN CLAMP - IT CAN SHATTER THE TUBE ].
  • SATISFACTION GUARANTEE - Love your tube or we will buy it back from you - Simple as that..
Check Stock

Extraction Proz 50-EXT-12 Glass Extractor Extraction Filter Tube 12' Long 50mm Diameter Clear with Stainless Steel Clamp

  • LAB GRADE GLASS - Made with Borosilicate Glass(Pyrex) Annealed at 1050 F Degrees to remove any stress from the glassware. This will make the glass stronger than poorly annealed or stressed glass..
  • 50mm DIAMETER / 2.0 INCH x 12 INCH LONG - The extra wide tube has more volume than other smaller tubes allowing more material to contained inside the tube. This will reduce the amount of runs needed to process all your material..
  • MADE IN USA - Proudly Hand blown here in Southern California, accept no substitutes. Don't risk your material by saving a few dollars..
  • STAINLESS STEEL CLAMP - The included stainless steel clamp will keep your filter securely in place so you can pack your tube with material and no worry about the filter coming loose. [ DO NOT OVER TIGHTEN CLAMP - IT CAN SHATTER THE TUBE ].
  • SATISFACTION GUARANTEE - Love your tube or we will buy it back from you - Simple as that..
Check Stock

Boenoea Bicycle Quick Release Seatpost Clamp Anodised Aluminium Alloy 31.8mm/34.9mm

  • Boenoea Bicycle Quick Release Seat post clamp is durable and lightweight, ergonomic design, more efficient and comfortable qr seat post clamp..
  • Hollow design, Retain strength, comes anodized in Black colorfast surface, great anti-corrosion..
  • 31.8mm Seatpost clamp apply for out diameter 30.2mm - 32.1mm bicycle frame seat post..
  • 34.9mm Seatpost clamp apply for out diameter 33.5mm - 35.2mm bike frame seat tube..
  • Attention Please: The "31.8", "34.9" refer to the Seatpost Tube Outer Diameter, not the seat post diameter..
Check Stock

X-Haibei 2 Pcs Rail Clamp On Fishing Rod Holder for Boat Stainless Steel Clamp Fittings Rail 1-1/4 to 2 inch

  • Clamp-on feature eliminates drilling rail and simplifies relocation,Simple installation, Mounts on vertical or horizontal rails.
  • Our clamp fits any rail between 1 1/4" OD to 2" OD..
  • 9" tall tube with 1-5/8" ID O.D. tube: 2inch..
  • Made from 304 stainless steel high polished stainless tube with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp.Angle....
  • Black plastic liner that would normally scratch or mar the fishing rod surface..
Check Stock

Rubber Cushion Strut Clamp 1" NOM (1-1/8" OD) for Mounting Copper Piping, PEX Pipe, CVPC Tubing to Strut Channels [5 Pack]

  • [QUALITY] Zinc plated to prevent corrosion, the heavy duty steel strut clamp brackets with attached bolt and nut clamp securely over a hard rubber cushion to nearly surround the sides of a pipe or tube..
  • [PROTECTIVE RUBBER CUSHION] The hard rubber cushion protects pipe and tube by absorbing shock caused by vibration and temperature changes, reduces unwanted noise, insulates pipe and tubing from metal surfaces, and prevents galvanic corrosion..
  • [APPLICATION] Insert pipe or tube into rubber cushion inside steel strut brackets. Mount strut clamp legs to 1" NOM (1-1/8" OD) strut channels. Attach nut to bolt and tighten..
  • [CONTENTS] Each of the 5 clamps contain two heavy duty zinc plated steel half brackets with attached bolt, a nut, and protective rubber cushion..
  • [VERSATILE] Use for 1" NOM (1-1/8" OD) copper pipe, PEX pipe, CPVC tube, and other conduit tube, hose, and wire applications. Can be hung vertically and horizontally on walls and ceilings. Compatible with unistruts in 1-5/8", 7/8", 13/16" heights..
Check Stock

Super Economical Enema Bag Kit (2 Quart) - BPA and Latex Free - Foldable and Compact - Travel Compatible (2 Pieces)

  • An absolutely wonderful Complete kit for those wanting very Easy, Cheap, Hygienic and travel options.
  • Helps avoid cumbersome setups when feeling lazy - Quick, Convenient Enema Option.
  • Transparent Replaceable Bag WITH suspension loop - visible liquid level marking.
  • Superior clamp – not a difficult slider clamp.
  • Tube is freely detachable and replaceable.
  • Non flimsy – Unlike ultra-cheap disposable bags.
  • Replacement parts available separately - Simply search "Super Economical Enema Bag" or "Replacement Enema Tubing with Clamp and Nozzle".
Check Stock

KMFCDAE Tube Clamp Mounting Bracket for 3 Inch Bull Bar Roof Rack Roll Cage Mounts LED Square Round Work Light & Light Bar Adjustable between 72-79mm/2.8-3.1inch

  • ✔️ Tube Clamp mount standard for 3 inch tube roll bar, round bar, roll cage, bull bar, bumper, nudge bar, horizontal bar, roof roll, roof cage, 3....
  • ✔️ Using this tube clamp, you can add more LED square/ round work light & LED light bar to improve visibility at darknight, and enjoy super good....
  • ✔️ Made of high quality 6063 aluminum, with textured powder coated finish. Able to withstand driving vibration and rain washing without cracking....
  • ✔️ Come with tailor-made rubber gasket, help to adjust mounting size for perfect fitment, and fix the tube clamp firmer and sturdier, while also....
  • ✔️ The internal sides are designed with anti-slip tooth, light and handy, very easy to install, provide all sets of mounting hardware needed (work....
Check Stock

Merrell mens MOAB 2 WTPF Hiking Shoe, Granite, 10 US

  • 19" front wheel assembly for pit pro trail dirt bike.
  • 45mm top clamp and fork, 48mm bottom clamp and fork, fit 7/8'' 22mm handle bar.
  • The assembly comes complete with the front 1.6 x 19 rim, 70/100-19 knobby tire, inner tube, wheel bearings.
  • Please note: Tire sizes vary by ride, please check your current tire and wheel sizes before placing the order.
  • Package include: 1 x Tire + 1 x Rim + 1 x Inner tube + 1 x Brake Disc + 1 x Brake Master Caliper + 1 x Rim Axle + 2 x Front Fork Assembly + 1 x Triple Clamp Handlebar Riser set.
Check Stock