Categories

Best Tube Headphone Amp Kit For 25

Douk Audio P1 Bluetooth Vacuum Tube Preamp Headphone Amplifier with Extra GE5654 Tubes

  • ...1 Preamp has been acclaimed by countless audiophiles worldwide, now we upgrade 6J5 to JAN5654 / GE5654 tubes according to many audiophiles' feedback, the sound quality will be greatly improved..
  • With 3 kinds of audio input(Bluetooth/USB/RCA) and 2 kinds of output(RCA/3.5mm headphone), P1 can be used as HiFi tube Preamp, USB DAC or headphone amp with HiFi clear, warm, dynamic, sweet tube sound, bringing extremely high-quality listening experience..
  • Bluetooth 5.0 (QCC3034) supporting APTX-HD lossless transmission. PC-USB (CM6642) supporting 24bit 192KHz and compatible with Windows/Mac/Linux system, matching well with many audio devices such as iPod, Phone, MP3 players, TV, Blu-ray players, Echo Dot, CD players, etc..
  • Adopting NE5532 op amp+classic 47 headphone amp architecture which can drive 32-300 ohms headphones, and a bypass switch is specially designed to turn on/off the tone control, more convenient to enjoy original sound or obtain more delicate sound with treble and bass control knob, adding much fun and higher playability..
  • Exquisite appearance with proper size, blue and ora....
Check Stock

GripStick Headphone Plug Extraction Tool

  • PRODUCT COMPOSITION: This headphone extraction tool kit cutting has stainless steel pipes. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack..
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 100 bucks will be saved..
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above..
  • It is portable and can be used to disassemble glasses and watches and some other electronic products. Hope you like it!.
Check Stock

Rockville PRO-D7 KIT 7 Mic Drum Kit w/Bass+Snare+Overhead Microphones+(4) Stands

  • ...C3 Professional Tripod Microphone Stand With Quick Release Hand Clutch and Boom. One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!). This mic stand is the easiest and quickest to adjust on the market!. Leg joint is made out of aluminum (almost all other brands use plastic). The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube..
  • This is about 50 % thicker than almost all other brands on the market, making this one of the sturdiest stands in the world. Steel & Nylon Construction. Virtually Unbreakable (under normal use). Small Cable Guiding Clips for running cables along the stand. Black Color. Adjustable Height Range: 43-70 inches. Boom: 30 inches. Leg Diameter: 0.75 inch. Top Tube Diameter: 0.6 inches. Lower Tube Diameter: 0.6 inches. Boom tube size: 0.79 - 0.39 inch.
  • Features of RKDS:. Rockville Kick Drum/Guitar Amp Mic Stand With Steel Round Base, Fixed Boom and Rubber Pad. Low profile height adjustable microphone stand for kick drums and guitar amps. Heavy-duty steel round base with rubber pad provide extreme stability. Fixed boom arm provides precise positioning. Scratch-resistant powder coated finish....
Check Stock

Upgrated to Version 2.0 - Headphone Jack Removal Tool - Headphone Plug Extraction Tool, Tubes of Different Thickness, Jack Remover

  • PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack..
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved..
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above..
  • GUARANTEES: This set of headphone removal tool is considered a SINGLE-USE tool. But we offer a 100% satisfaction guarant....
Check Stock

P1 Bluetooth 5.0 GE5654 Vacuum Tube Preamplifier Hi-Fi Valve Headphone Amplifier Wireless Receiver Audio Decoder Preamp USB DAC APTX-HD [Upgrade]

  • Douk Audio P1 Preamp has been acclaimed by countless audiophiles worldwide, now we upgrade 6J5 to JAN5654 / GE5654 tubes according to many audiophiles' feedback, the sound quality will be greatly improved..
  • With 3 kinds of audio input(Bluetooth/USB/RCA) and 2 kinds of output(RCA/3.5mm headphone), P1 can be used as HiFi tube Preamp, USB DAC or headphone amp with HiFi clear, warm, dynamic, sweet tube sound, bringing extremely high-quality listening experience..
  • Bluetooth 5.0 (QCC3034) supporting APTX-HD lossless transmission. PC-USB (CM6642) supporting 24bit 192KHz and compatible with Windows/Mac/Linux system, matching well with many audio devices such as iPod, Phone, MP3 players, TV, Blu-ray players, Echo Dot, CD players, etc..
  • Adopting NE5532 op amp+classic 47 headphone amp architecture which can drive 32-300 ohms headphones, and a bypass switch is specially designed to turn on/off the tone control, more convenient to enjoy original sound or obtain more delicate sound with treble and bass control knob, adding much fun and higher playability..
  • Exquisite appearance with proper size, blue and orange light decorating vacuum tube, makes it fashionable and attractive, bringing wonderful auditory and visual enjoyment, very suitable for home and desktop audio sy....
Check Stock

Dire Straits

  • Features of BluTube WD Rockville BluTube WD Audiophile grade tube amplifier with Bluetooth Color 2-Tone silver with wood accent 25 watts x 2 RMS @ 8 ohm 35 watts x 2 RMS @ 4 ohm (1) set of RCA inputs to connect to any audio device like a TV Laptop or MP3 player etc.
  • Optical input Coaxial input Sub output Tube amps do not hard-clip even at high volumes and are extremely efficient Due to this the amp sounds more like double the rated power!.
  • Built in Bluetooth with 33 foot range Built-in Preamplifier Headphone output VU meter Adjustable bass and treble (2 band equalizer) USB input for music files from USB thumb drive.
  • Rear Speaker Terminals Banana plug / binding post outputs for 2 speakers Frequency Response ( 3dB) 22Hz-20kHz Input Impedance 47kO Input Sensitivity 300mV Output Impendence 4-8ohm Total Harmonic Distortion(THD) ≤0 02%.
  • Signal-to-Noise Ratio(S/N) ≥86dB Bluetooth 2 1+EDR USB Supports WAV/MP3/WMA/APE/FLAC. Unit weight 6 6 lbs Unit dimension 10 6″ x 10 2″ x 5 1″.
Check Stock

AOYUTC Metal Tube Headphone Plug Extraction Tool- Headphone Tip Removal Tool,Remove Broken Headphone Plug from Headphone Jack of Mobile Devices

  • PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes....
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This....
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table.....
  • HOW TO USE: Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull....
  • GUARANTEES: This set of headphone removal tool is considered a single-use tool. But we offer a 100% satisfaction guarantee. If you are not satisfied....
Check Stock

Little Dot MK2 MKII 6J1 X 2 6N6 X 2 Tube Standard Hybrid Headphone Headphone Amp Pre-Amp Tube Amplifier MKII

  • Please notice that shipment will arranged about 25th Apr.【Tube + Transistor Hybrid Amplifier】XDUOO MT-602 adopts 6J1 tube for pre-amp and....
  • 【Compact Portable Headphone Amplifier】As it adopts transistors for buffer, strong output power up tp 1300mW, can easily drive many kind of....
  • 【Professional Capacitance】Apart from adopting the special enthusiast Japanese ELNA capacitance as the coupling capacitance to present have....
  • 【Volume Control, AUX In/Out】This model is designed with one line output, through the tube, and controlled by volume. lt can be used as the....
  • 【Matte Surface, Aluminum Alloy Shell】MT-602 is more than it’s amazing features, it is exquisitely built as well. Follow the modern minimalism....
Check Stock

Audiolab 6000A 100-watt Stereo Integrated Amp/Bluetooth DAC - Black

  • 25 watts per channel output, power can drive most home stereo speakers, Support bluetooth wireless for android, iPhone, tablets, smartphones, other streaming devices (supports APTX), support direct line-in, friendly USB and Aux input, when you plug it in via DAC/USB. Speaker output, pre output and 3.5mm headphone personal listening output..
  • Vacuum tube amplifiers in that the glass vaccum tube section is on the exterior. The chassis is made of finest stainless steel and plated with a high quality rose gold finish, flanked by two 1 inch thick wood panels with a lacquered black piano finish. which looks great in any office, study, or even in the midst of the swankiest cocktail party..
  • This tube amplifier is the best choice for HIFI friends a first choice for music lover, see beautiful and sound beautiful, it's the Dared best-selling and most cost-effective tube amplifier, The machine is warranty for 1 years, If the product you purchase does not satisfy your needs, send it back for a full refund..
Check Stock

Preamplifier Preamp Tube Board DIY Kit 6J1 Preamp Tube Board Preamplifier Headphone Amplifier

  • 【6J1 ELECTRON TUBE】Preamplifier adopt 6J1 electron tube, classic collocation. This is a preamplifier + headphone amplifier that can be used with a post-amplifier or an active speaker, or it can be used with headphones..
  • 【POWER SUPPLY】Preamplifier adopts 12V DC power supply, internal stable boost to 100V to ensure the performance of the tube. The headset can be pushed to 300 ohms, the general recommendation is 16-150 ohms..
  • 【WARM AND MELLOW MUSIC SOUND】A cost-effective preamplifier with warm, mellow, sweet and transparent sound. The sound of this board is warm, mellow, sweet and transparent, and full of music..
  • 【ENJOY DIY】Preamplifier is a cost-effective preamplifier. Replaceable op amp and upgrade the tube, just plug it in the direction of the foot. This preamplifier allows you and your family to enjoy the joy of DIY..
  • 【STABLE PERFORMANCE】Preamplifier preamp tube board is carefully debugged circuit with stable performance, quiet and no noise. Output port: 3.5MM headphone output, preamp output..
Check Stock

VOX Valvetronix VT20X Modeling Amplifier,Black

  • |20 Watt Modeling Amplifier| The VT20X is rated at 20 Watts making it the ideal choice for an at-home amplifier, combining sophisticated modeling....
  • |12AX7 Preamp Tube| Multi-stage Valvetronix tube preamp design incorporates authentic analog circuitry to achieve the subtle tonal adjustments and....
  • |Ultimate Versatility| 11 realistic amp models and 13 high quality on-board effects allow you to craft your signature tone, and save it across 33....
  • |AUX In & Headphone Out| Aux in jack and headphone output make silently practicing or recording simple. Use the USB connection to dive deeper into....
  • |Small But Loud| The compact combo amplifier is designed with a tightly sealed cabinet and a proprietary bass-reflex design to deliver stunning....
Check Stock

Rockville BluTube LED 70W Bluetooth Tube Amplifier/Home Stereo Receiver with Blue Illumination, Optical Input, Sub Output

  • Rockville BluTube LED 70W Bluetooth tube amplifier/home stereo receiver with blue Illumination, optical input, Sub output.
  • Rockville blutubeled audiophile grade tube amplifier with Bluetooth. Black Color with blue illuminated tubes and blue illuminated knobs. 25 watts x 2 RMS @ 8 ohm. 35 Watts x 2 RMS @ 4 ohm. (1) set of RCA inputs to connect to any audio device like a TV, laptop, or MP3 player, etc. Optical input..
  • Coaxial input. Sub output. Tube Amps do not hard-clip even at high volumes and are extremely efficient. Due to this the amp sounds more like double the rated power! . Built in Bluetooth with 33 foot range. Built-in preamplifier. Headphone output. Vu meter. Adjustable bass and treble (2 band equalizer)..
  • Usb input for music files from USB thumb drive. Rear speaker terminals: banana Plug/ binding post outputs for 2 speakers. Frequency response (3dB): 22hz-20khz. Input impedance: 47Ko. Input sensitivity: 300mV. Output Impendence: 4-8ohm..
  • Total Harmonic distortion): ≤0. 02%. Signal-to-Noise ratio(s/n): ≥86dB. Bluetooth: 2. 1+Edr. Usb: Supports WAV/MP3/WMA/APE/FLAC. 110V. Unit weight: 6. 6 lbs. Unit dimension: 10. 6"X10. 2"X5. 1".
Check Stock

10 Pcs Wire Crimp Connector Cord End Terminal Insulated Ferrule Red E25-16 4AWG 25mm2

  • Features:Great for car amps & battery terminals.use these to clean up the look in engine bay and amp connections.Works perfect with amplifiers that take a direct wire input. Much better connection than spade connectors..
  • Product name : insulated ferrule, model : e25-16, design : tube Type ,Material :plastic + Copper, color : black, red, Green,Yellow, Blue..
  • Plastic part Size : 10.5 x 11 x 11 mm / 0.41" x 0.43" x 0.43" (inner Diameter meter*od*l), total Length : 28 mm / 1.1"..
  • Fit wire gauge : 4AWG 25mm2, tube Size : 7.5 x 8 x 16 mm / 0.3" x 0.32" x 0.64" (inner Diameter meter*od*l)..
  • 100% Brand New High Quality Terminals Connector.Bought these great kit if you need 4 gauge ferrule connectors in different colors..
Check Stock