Categories

Best Tube to female Pipe Fittings

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

  • ...or gas tube,Compressor gas tube,Grill gas line.etc.
  • 【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
  • 【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, reducing the connection point and preventing gas leakage.Really convenient and 100% safety..
  • 【Installation】-High temperature resistance,Low pressure resistance,Explosion-proof and compressive material, it can be installed exposed to indoor light , or it can also be embedded in concrete, or behind the wall in dry wall systems as needed. also Suitable for burial installation,Underground Installation easier to handle Bends around corners,eliminating need for additional joints and fittings..
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

TAILONZ PNEUMATIC Female Straight 1/4 Inch Tube OD x 3/8 Inch NPT Thread Push to Connect Fittings PCF-1/4-N3(Pack of 2)

  • 【Product Name】 Straight Push to Connect Fittings Air Fittings.
  • 【Size】1/4" Tube OD x 3/8" Female NPT Thread，Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.
  • 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F.
  • 【Features】Control pipeline connection or disconnection..
Check Stock

TAILONZ PNEUMATIC Female Straight 1/4 Inch Tube OD x 1/8 Inch NPT Thread Push to Connect Fittings PCF-1/4-N1(Pack of 10)

  • 【Product Name】Straight Push to Connect Fittings Air Fittings.
  • 【Size】1/4" Tube OD x 1/8" Female NPT Thread,Notice - NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.
  • 【Maximum Pressure】0~145Psi【Working Temperature】32～140°F.
  • 【Features】Control pipeline connection or disconnection..
Check Stock

Minimprover 2 PCS Brass 3/8 Female Flare by 3/8 Female Flare Swivel Brass Adapter,Female Swivel Nut,Flare Tube Fitting,Valve Connector

  • ★ 【Material】: Made of premium solid brass with a longer service life, stronger and more durable than iron and iron galvanized pipe fittings..
  • ★ 【Advantage】: The positive nature of the connection with the flare on the tube clamped between the nut and the body makes for extreme dependability and safety..
  • ★ 【Application】: LP and natural gas, flammable liquids (special order), instrumental, refrigeration. power steering, hydraulic and pneumatic systems.Not for use in potable Drinking water applications..
  • ★ 【SIZE】:3/8" female flare by 3/8" female flare Swivel union..
  • ★ 【Package Include】: 2 PCS 3/8" female Flare by 3/8" female flare adapter. Comes with 1 year guarantee..
Check Stock

Sewer Jetter Kit for Pressure Washer,Sewer Jetter Nozzles Kit,100 FT Drain Cleaning Hose for Pressure Washer,Button Nose and Rotating Sewer Jetting Nozzle,1/4 Inch NPT,Orifice 4.0,4.5,4000-5800 PSI

  • ... is ISO 9001 Certified. Pin test each crimp to check proper internal crimp..
  • ❤【Button Nose and Rotating Nozzle】Button Nose 4.0 Orifice.1 front jet at 0°that clears blockages.3 rear jets at 33° flush out debris loosened by the front jet.1/4″ Female Fitting – Fits 1/4″ NPT male sewer jet hose fittings.Rotating Sewer Jetter Nozzle 3 backward rotating spray blasts into clogged pipe and moves the nozzle through pipe. The nozzle is easy to slide into drain pipes and sewer lines.The orifice is 4.5.Fits sewer jet hose with 1/4″ male end. 1/4″ Female NPT Fitting..
  • ❤【Quick Connect Plug and Female Metric M22 to 1/4 Inch Female NPT Fitting】Quick Connect Plug used in a lot of situations where high pressure connections are frequently assembled or disassembled.Ideal for quick exchange of pressure washer outlet, sewer jetter hose, guns and nozzles.It makes a solid connection with quick coupler each time.Pressure washer coupler convert metric M22 14mm female NPT thread to 1/4″ Female NPT..
  • ❤【After Sale Guarantee】100% money back guarantee – For whatever reason, you are not satisfied, you can request a replacement or a full refund. Customer satisfaction is our tireless pursuit. If you are dissatisfied with....
Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

  • Long nipple for connecting two threaded pipes and extending pipe length.
  • 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
  • Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
  • Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

USA SEALING ZUSA-TF-PTC-526 Nylon Push to Connect Tube Fittings Female Branch Tee Black 1/4 PTC x 1/4 NPT Female

  • Pipe Thread Material: Nickel-Plated Brass.
Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....
Check Stock