Categories

Best Tubing Die Set

MASTERCOOL 72485-PRC Universal Hydraulic Flaring Tool Set Includes 3/8 and 1/2 Transmission Cooling Line Die and Adapter Sets with Tube Cutter Silver/Blue

  • TUBE AND DIE SET STABILIZING ARM for easy tube forming.
  • MAGNETIC ADAPTER HOLDER keeps adapters in place.
  • EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies.
  • CAN BE USED ON "annealed steel" & "dead soft".
  • INCLUDES dies and adapters to fabricate push connect 1/4, 5/16 and 3/8".
  • GM fuel line flare, brake lines and transmission 5/16 and 3/8".
  • flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
  • metric bubble flare 4. 75, 6, 8, and 10mm.
  • GM transmission cooling line 3/8" and 1/2".
  • mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O. D. tubing (1/8 to 1/2" nominal) all packaged in a custom blow molded case.
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

Tube Pipe Hose Bead Roller Intake Intercooler Piping Pipe Bead Roller Tool Fits Clamps 5/8″ DIY Tool and larger tubing Machine

  • 【FITS MODEL】- Fits 5/8″ and larger tubing.
  • 【APPLICATION PIPE SIZE】- Suitable for Aluminum up to 16 gauge wall thickness (0.065’’ or 1.65mm) and also suitable for Titanium up to 18 gauge (0.049’’ or 1.25mm).
  • 【PREMIUM QUALITY】- Manual Bead Roller made of high quality steel and aluminum material components. Direct replacement for Tubing Beader Tool, meet or exceed the OEM standard.
  • 【SIMPLE OPERATION】- Just insert the end of the tubing between the dies and start turning the handle. Give the wheel a quarter rotation with each full tubing rotation gradually tightening the die against the tubing. Please note that always apply the bead before welding.
  • 【12-MONTH WARRANTY】- Package include 1 x Tube Pipe Tubing Beader Tool. If you have any questions about Tubing Beader Tool, please contact us and we will reply you as soon as possible.
Check Stock

Amerbm Professional Brake Line Flaring Tool 45 Degree Set Single Double and Bubble Flares Tool Kit for Steel Copper Tube

  • 45-degree tool set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16", 1/4", 5/16", 3/8" diameter lines..
  • This flaring tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily..
  • The "turret-style" design allows you to make those precision flares in a minimal time, which saves you the hassle of groping for small parts or losing them..
  • When building car brake lines, the brake flaring tool kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises..
  • The flaring tool set is made of durable steel for reliable and long-lasting performance, high precision and safe to use. With a plastic case, compact and convenient to carry and store..
Check Stock

Almhs Tool Manual Mounting Mini Universal Bending Bender

  • Sold By Almhs,Each Set include Special user's Guide and parts list.
  • Made of hardened tool steel Mounts on a work bench or held in a vise.
  • Circle Pins (3/16,1/4 & 1/2" diameter) 1 of each: Circle die ( 1" Diameter), stop pin, sharp angle.
  • Makes sharp angle bends up to 5/16" diameter rod and 1 x 1/8" flat metal.
  • Forms wire, flat metal and tubing into clamps, handles, brackets, hooks, coils and more.
Check Stock

Capri Tools 3/16 in. Double Flaring Tool (CP21110-316) & Capri Tools Tube Bender, 1/8, 3/16 and 1/4 in. (CP21105)

  • Product 1: Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 3/16 in. tubing such as brake lines.
  • Product 1: Works flawlessly with 3/16 in. steel, nickel, and copper tubing.
  • Product 1: Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots.
  • Product 1: Detachable die lets you also use with a bench vise.
  • Product 2: Easily make tight bends on round small-diameter copper, brass, and aluminum tubing.
  • Product 2: Use with tubing with 1/8, 3/16, and 1/4 in. outer diameter.
  • Product 2: Bend tubing from 0-120 degrees. Reference marks at 45 and 90 degrees for accurate bends.
  • Product 2: Compact design lets you work easily in tight spots.
Check Stock

Dynasty Hardware DYN-SR60-CM 1-Inch Diameter Shower Curtain Rod And Mounting Brackets 60-Inch Polished Chrome

  • Set includes: shower rod, wall flange pair & mounting hardware.
  • Matching wall flanges: 2-3/4" diameter concealed mounting, solid die-cast zinc alloy.
  • Shower rod can be cut to length with pipe cutter or hacksaw.
  • 6' long (2-piece), 1" diameter, heavy gauge tubing.
Check Stock

Ancor 320125 Heat Shrink Step Down Butt Connector 22-18/22-14 AWG - 25 Pieces

  • 4: 1 shrink ratio tubing to ensure a watertight seal between wires.
  • Flared barrel with uniform copper wall ensures an easy and proper mechanical crimp.
  • Crimp indicator on barrel for proper placement of installation tool.
  • Clear heat shrink tubing ensures crimp accuracy.
  • Colored stripes on the barrel indicate which crimp die to use, regardless of application.
Check Stock

Eastwood 37 Degree Flare Die Set for Professional Brake Tubing Flaring Tool

  • Add These 37-Degree Flare Dies To Our Pro Brake Tubing Flaring Tool So You Can Do Even More..
  • Put 37-Degree Flares On 3/16", 1/4", 5/16" And 3/8" Tubing.
  • 37-Degree Flares Are Used In Many Custom, Hydraulic And Military Applications Where An- Or Jic-Type Fittings Are Used.
Check Stock

Dynasty Hardware DYN-SR72-CM 1-Inch Diameter Shower Curtain Rod And Mounting Brackets, 72-Inch, Polished Chrome

  • Set includes: shower rod, wall flange pair & mounting hardware.
  • 6' long (2-piece), 1" diameter, heavy gauge solid brass tubing.
  • Matching wall flanges: 2-3/4" diameter concealed mounting, solid die-cast zinc alloy.
  • Shower rod can be cut to length with pipe cutter or hacksaw.
  • When assembled the rod is a smooth to allow easy shower curtain opening and closing.
Check Stock

3rd Generation Hydraulic Tubing Bender for Round Tubing, Hydraulic Pipe Bender for Roll Cage Tubing, 1.50 Inch Round Dimple Die

  • Bends round tubing up to 90 degrees which works perfect for roll cages, frame crossmembers, and chassis components.
  • Incremental marks cast into dies makes it easy to reproduce bends.
  • For use with up to .110" wall thickness mild steel or .096" wall thickness chromoly round tubing.
  • Comes with one aluminum die in the size of your choice 1", 1-1/4", 1-1/2", 1-5/8" or 1-3/4".
  • 7" bend radius dies are also sold individually if you need to bend a different size tubing later.
Check Stock

Medela Breast Pump Parts, Freestyle Replacement Tubing

  • EASY, CONVENIENT EXTRA TUBING READY WHEN YOU NEED IT: Keeping replacement tubing on hand with your other Medela Freestyle replacement parts ensures that you always have a clean extra set ready at a moment’s notice and available when you need it.
  • AUTHENTIC MEDELA SPARE PARTS: As official Medela Freestyle replacement parts, our tubing is engineered with the quality that moms expect.
  • inauthentic spare parts can vary in terms of quality and workmanship, which may affect the performance of your pump.
  • REPLACEMENT TUBING DESIGNED FOR OUR FREESTYLE BREAST PUMP: Promote the quality and health of your Freestyle breast pump with replacement tubing, and ensure optimal pump performance – seamlessly replace damaged or worn tubing or simply have an extra set.
  • COMPLETE SET IN EACH RETAIL PACKAGE: Your purchase contains one complete set of replacement tubing (consisting of two tubes), providing everything you need to replace your existing Freestyle tubing and begin pumping right away.
Check Stock

DZNTOOLS Rivet Dies Eyelets Grommets Molds Snap Dies Prong Set Popper Fastener Hand Press Machine

  • Rivet Dies Eyelets Grommets Molds Snap Dies Prong Set Popper Fastener Hand Press Machine.
  • 1 piece of Hand Press Machine 1 set of Snap Die 10 mm 1 set of Snap Die 12.5 mm 1 set of Snap Die 15 mm 1 set of Rivet Die 5 mm 1 set of Rivet Die 6 mm 1 set of Rivet Die 7 mm 1 set of Rivet Die 9 mm 1 set of Rivet Die 11 mm 1 set of Eyelet Die 4.5 mm 1 set of Eyelet Die 5.4 mm 1 set of Eyelet Die 6 mm 1 set of Eyelet Die 7.5 mm 1 set of Eyelet Die 9 mm 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece Brass Base for a hole cutter.
  • Suitable for leather, fabrics, jeans, costumes etc..
Check Stock