Categories

Best Tubing Fastener

JAKIA 2022 Updated CPAP Hose Tube Cover Wrap Insulator Protector,6.2 ft Long Double Fabric Soft Fleece with Full Length Zipper,Soft Surface Safe and Comfortable 2 Hose Bushing and 1 Hose Clip Included

  • Better sleep. The soft hose cover reduces the noise of hitting against the headboard or nightstand at night..
  • Eliminate rainout. The CPAP hose cover is thick enough to keep the hose warm and prevent condensation..
  • Away from cats. The tube cover is perfect to protect cats from chewing on the CPAP hose...
  • The full-length zipper of tubing wrap is easy to close, and it's the right balance of sturdiness and lightweight..
  • The end of the CPAP tube cover has a hook and loop fastener that you can fasten the zipper to keep the wrap from slipping on the CPAP tubing.(Do not....
Check Stock

Kobalt Flare Nut 3-Piece Set 6-Point SAE Flare nut Open End Wrench Set

  • Kobalt 3-piece flare nut wrench set offers a size range from 3/8-in to 11/16-in, so you can tackle a variety of projects.
  • Open-ended sides allow for easy access over fluid lines and tubing for added convenience.
  • Chrome vanadium steel construction provides strength and durability.
  • High-polish chrome finish prevents rust and wipes away dirt and grime with ease, so they stay looking like new.
  • 6-point design helps prevent fastener damage and stripping of softer metals.
Check Stock

Vive Oxygen Tank Holder for Wheelchair - Portable Medical Cylinder Backpack for Travel - Carrier Accessories Bag for Walker, Rollator, Scooter - Case Fits Canister Sizes M2, M4, M6, M9, C, D, E

  • SECURELY USE WITH VARIOUS TANK SIZES: Easily adjustable, the Vive Mobility oxygen tank holder allows you to safely and securely transport an oxygen tank on a wheelchair, rollator or other mobility aid. The oxygen tank bag securely holds tank sizes up to D and E cylinders and includes a separate fastener for securing smaller tank sizes..
  • DURABLE DESIGN: Constructed with a sturdy polyester material, the lightweight oxygen tank holder features a reinforced opening and base and is also lined with a composite material for added durability. Suitable for daily use, the cylinder bag is easy to spot clean as needed..
  • WORKS WITH MOST WHEELCHAIRS: Designed with multiple fastener straps, the Vive Mobility oxygen cylinder carrier is easy to install on most wheelchairs, rollators and walkers for greater convenience. The straps include quick-release buckles and are positioned to stabilize larger cylinders for comfortable use..
  • EXTERIOR COMPARTMENTS: Conveniently store extra tubing and small items in an easy to access open compartment. The front of the tank holder includes a zippered compartment for securely carrying loose items..
  • VIVE GUARANTEE: 60 day guarantee so you can purchase now with confidence..
Check Stock

VCT 10 Pc 3/8' Drive Fully Polished Metric Flare Nut Crowfoot Wrench Set

  • 3/8 in. Drive Crowfoot Flare Nut Wrench Set includes 10 pieces of all sizes between 10mm and 22mm--the most common sizes used for automotive repair. Each wrench is made with drop forged alloy steel and designed with an open side and a 15-degree offset at each end. This set comes mounted on a storage rail for convenient transport and storage..
  • Includes 10 Crowfoot Flare Nut Wrenches from 10, 11, 13, 14, 15, 16, 17, 18, 19, 22mm.
  • Open side at each end allows for easy access over lines and tubing while still providing 5 sides for a maximum on fasteners.
  • 15-degree offset provides clearance for your fingers and other obstructions near the fastener.
  • Drop forged alloy steel material provides strength and comfort.
Check Stock

Roadformer 5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel (2 Pack)

  • 2 PIECES IN PACK – 5 inch Lap Joint exhaust clamp is made in high quality standard aluminized steel, used for 5 inch OD to ID exhaust system connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is using 12.9 degree high-strength fastener providing real sealing capability of leakage free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, new engineering design provides fast, easy and accurate installation..
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

Eskimo Eskape 2600 Insulated 2 Person Ice Fishing Shelter

  • TWO TRUE OVERSIZED SIDE DOORS: Oversized side doors make it easy and convenient to move in and out of the shelter without having to step over your gear..
  • STORMSHIELD INSULATED FABRIC: Three-layer, abrasion-resistant, bonded fabric with 80 grams of high-loft insulation providing maximum warmth and a robust barrier against light/wind penetration..
  • GRAY INTERIOR: Brightens the shelter interior, making it easier to see and fish..
  • SLIDING VERSA SEATING SYSTEM: Allows seats to swivel and slide front-to-back. Lifts up for quick access to gear in the sled..
  • ALUMINUM SQUARE TUBING: Creates a lightweight, rigid structure to withstand wind..
  • ZIPPERED WINDOW COVERS: Interior windows feature hook and loop fastener tape, along with zippers on each side—allowing full closure and blocking of sunlight..
  • MESH STORAGE POCKETS: Keep your essential fishing gear handy & out of the bottom of the sled..
  • DOUBLE-WALLED HINGE BRACKET: Provides a sturdier structure in windy conditions..
  • YKK ZIPPERS: Quality, durable, industry-preferred zippers—standard on all Eskimo ice shelters..
Check Stock

Roadformer 3' Butt Joint Exhaust Band Clamp - Aluminized Steel for 3' OD Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 3" butt joint exhaust clamp is made in high quality standard. This band clamp is used for 3" OD exhaust ends connection.
  • REAL SEALING CAPABILITY – Roadformer 3" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached hardware provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

Rexka Rear Trunk Liner Push-Type Retainer for Mazda B467-68-AC3-02 CX-7 CX-9 Mazda 5 (Pack of 30)

  • Other Names:Console Assembly Screw, Door Trim Panel Fastener, Side Cover Fastener, Lower Trim Panel Fastener, Pkg Tray Trim Clip, Rear Panel Trim Fastener, Rear Pillar Trim Fastener, Side Panel Fastener, Side Trim Fastener, Trunk Side Trim Fastener, Upper Molding Fastener, Cowl Trim Fastener, Trunk Lid Trim Fastener, Quarter Pillar Trim Fastener, Rear Pillar Trim Clip, Trim Panel Assembly Fastener, Under Cover Fastener, Lower Center Pillar Trim Fastener, Trim Panel Assembly Clip, Fastener.
  • Head Diameter: 18mm Stem Length: 14mm Fits Into 6mm Hole.
  • Replaces Mazda: B46768AC302 Mazda 5, CX-7, CX-9, Miata, Millenia, MX-6, RX-7 & Protégé 1993 -.
  • Positions:Left Front, Left Lower, Left Rear, Left Upper, Right Front, Right Lower, Right Rear, Right Upper.
Check Stock

Roadformer 5" Butt Joint Exhaust Clamp - Aluminized Steel for 5 inch OD exhaust pipes, muffler ends and exhaust system connection with leakage free (2 Pack)

  • 2 PIECES IN PACKAGE – 5 inch butt joint exhaust clamp is made in high quality Aluminized Steel, it is used for 5 inch OD pipes & muffler ends connection.
  • REAL SEALING CAPABILITY – Roadformer 5 inch exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, New design provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 560 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

Woder WD-10K-ADV-JG Ultra High Capacity Inline Water Filter with ¼” John Guest Fittings - WQA Certified 10,000gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants – USA Made

  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
  • MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....
Check Stock

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

Cruiser Accessories 82630 License Plate Frame Fastener Caps, Chrome

  • Put the final touch on a novelty/license plate frame with a set of chrome fastener caps.
  • Eliminates the visibility of the fastener and completes the look of your license plate.
  • Fastener caps are chrome plated plastic and designed to fit all novelty/license plates.
  • Includes four (4) fastener caps with plastic cap retainers.
  • User friendly and easy to install, see back of package for installation instructions.
  • Designed to fit all standard novelty/license plates.
  • Easy to install (illustrations on back of package).
Check Stock