Categories

Best Tubing Line Pipe

B BOSI TOOLS Tubing Cutter, 3/16 to 1-3/8 inch Outer Diameter Heavy Duty Pipe Cutter of Aluminum, Copper, PVC, Thin Stainless Steel Tube

  • 【Large Cutting Capacity】This tubing cutter quickly and easily cuts 3/16" to 1-3/8" copper, brass, aluminum and plastic tubing, precision designed and constructed with thrust bearing feed for smooth cutting action. Each tool is tested to ensure accurate spiral free cutting..
  • 【Clean & Precise Cut】B BOSI TOOLS professional copper pipe cutter set has 6 pieces of individual bearings allowing for increased cutting speed. Precise rolling control makes every cut smoother and more accurate in pipe cutting..
  • 【Easy to Use】Slide the cutting wheel feed mechanism into place, line up the cutting wheel with the cut line and tighten handle, rotate cutter around tube, tighten knob every few turns until wheel cuts through, use reamer to smooth the edges of the cut..
  • 【Widely Application】This convenient tubing cutter combo is a must-have for any toolbox. Ideal for refrigeration and plumbing programs. The cutter allows you to easily cut metallic tubing with a simple one-handed operation..
  • 【Durability & Practicality】Heat treated alloy steel cutting wheel and high-grade steel construction make our heavy-duty copper tubing cutters perfect for plumbing, electrical, air conditioner installation, automotive, and DIY applications..
Check Stock

General Tools RW121/2 Replacement Cutter Wheels Set of 2

  • The General Tools and Instruments RW121/2 gold standard tubing cutter wheel is the new quality standard replacement cutter for General Tools tubing....
  • General Tool's gold standard cutting wheels are made from tempered, bearing tool steel for smooth, exact pipe cuts.
  • The slim-line surface geometry ensures fewer inner surfaces burrs and less chance for outer surface distortion.
  • The RW121/2 replacement cutter wheel is designed to fit all General Tools tubing cutters, Pro or Classic series.
  • The combination of shape, strength, and durability enable these cutter wheels to repeatedly provide quicker cutting without deforming the pipe's outer....
Check Stock

RainDrip 052020P Drip Watering Hose , Black Polyurethane 1/2 inch x 200 Ft

  • Use in a variety of ways: as a main supply line connected to a low-flow, drip-watering device.
  • as a feeder line that branches off larger tubing or pipe.
  • and with emitters punched into the tubing to deliver water along the line.
  • Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Tubing outside diameter (OD) is 0.620 in., internal diameter (ID) is 0.520 in..
  • connects to point-of-connection device using appropriate fitting.
  • emitters and feeder lines can be punched directly into the line or attached to the end.
  • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation.
  • water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion.
  • As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated.
  • Works with Raindrip products and other products with compatible connection type.
  • Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
  • the middle layer is composed of recycled conten....
Check Stock

Pipe Cutter [1/8\ - 1 1/8\] Tube Cutter Tool for Copper Pipe, Stainless Steel Tubing, Metal, Plastic, Brass - Copper Pipe Cutter - Compact & Tight Space Rigid Tubing Cutter Set for Plumbing

  • HANDYMAN’S BEST FRIEND – Our tubing cutter is especially designed to assist plumbers, electricians & mechanics – whether it’s used as a screw cutter, copper cutter, steel cutter, brake line cutter or an exhaust cutter..
  • PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube..
  • NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
  • GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter..
  • EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confid....
Check Stock

Honeywell Natural Gas Permasert Version 2.0 Stab Coupling - 1 CTS - PN PC50103

  • Product: 1" CTS Stab Coupling Permasert Version 2.0 P/N: PC50103.
  • Details: 1-1/8" OD, 0.090/0.099/0.102 wall.
  • Fits line size: 1" inch CTS PE Tubing (1-1/8" Outer Diameter).
  • Used on Medium Density (yellow) PE Polyethylene plastic pipe for repairs or joining lengths together. Works for Natural Gas (NG) or Propane (LPG).....
  • IMPORTANT NOTE: There are various pipe sizes described as 1 Inch. This for CTS pipe not IPS pipe. These are different pipe sizing standards, so please....
Check Stock

SharkBite 1/2 Inch x 100 Feet White PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U860W100

  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems.
  • minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections.
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • PEX hose is great for repairs, and easy to cut with SharkBite shears.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA.
Check Stock

SharkBite 1 Inch x 100 Feet Orange PEX Pipe, Oxygen Barrier Flexible Water Tubing for Radiant Heating, U880O100

  • PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
  • minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections.
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • PEX hose is great for repairs, and easy to cut with SharkBite shears.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA.
Check Stock

General Tools RW122 Replacement Cutter Wheel for Larger Capacity Cutters

  • The General Tools and Instruments RW122 gold standard tubing cutter wheel is the new quality standard replacement cutter for General Tools tubing cutters.
  • General Tool's gold standard cutting wheels are made from tempered, bearing tool steel for smooth, exact pipe cuts.
  • The slim-line surface geometry ensures fewer inner surfaces burrs and less chance for outer surface distortion.
  • The RW122 replacement cutter wheel is designed for larger capacity cutters on iron pipes, PVC pipes, and other tough surfaces.
  • This cutter wheel fits General Tools Model # 120, # 125, and #126.
  • The combination of shape, strength, and durability enable these cutter wheels to repeatedly provide quicker cutting without deforming the pipe's outer diameter and cuts with minimum inner diameter burning.
Check Stock

Edward Tools Harden Pro Mini Pipe Cutter 1/8” to 7/8” - Cuts Copper, Aluminum, Metal - Multi Use Tube Cutter, PVC Cutter - Cuts Arrows, Lines - Heavy Duty Steel Blade Pipe Cutter Wheel

  • Conveniently cuts aluminum, hard and soft copper, brass, plastic tubing.
  • Heavy duty steel blades cuts pipe and tubing between 1/8” up to 7/8”.
  • Versatile Use - Can also be used as a brake line cutter, arrow cutter, tubing cutter, fuel line cutter.
  • Lifetime Warranty - We guarantee all Edward Tools products for life.
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • ...orrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fittings Kit: The air brake fittings contain 34 pcs. 10 PCS: Male Connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), M....
Check Stock

Beduan Pneumatic Tubing Pipe 5/16

  • Wide range for working temperature and pressure.
  • Tubing Pipe Working Temperature: -4℉-176℉（-20℃–80℃),） Stretch Resistance: 400kg/cm2.
  • Tubing Pipe Features: Excellent flexibility, Small bending radius.
  • Excellent chemical properties, Minimal pressure loss.
  • PU Tubing Pipe Material: PU( Poly Urethane ).
  • PU Tubing Pipe Size: 5/16″ (Outer diameter) , 3/16″ (Inner diameter). Package Total Length:39.4 Feet (12meters).
Check Stock

Sunpro CP7983 Mechanical Oil/Water Temperature Gauge - Black Dial

  • Blue-line styling with black 2-in face and white digits.
  • Includes 72-in capillary tubing with 5/8-in national pipe thread and 1/4-in, 3/8-in, and 1/2-in adaptors.
  • Includes 72 capillary tubing with 5/8 NPT thread and 1/4", 3/8 and 1/2" adapters.
Check Stock

EFIELD 3/8\ - 1\ Pex Pipe and Plastic Pipe Cutter

  • EFIELD Pipe and Plastic cutter has a unique shaped blade which gives piping a Clean Cut, No Burrs.
  • EFIELD Pipe and Plastic cutter Cuts any Size up to 1-Inch (This includes sizes from 1/8"-1").
  • EFIELD Pipe and Plastic cutter has Easy locking handle to safely store Pex Pipe Cutter.
  • EFIELD Pipe and Plastic cutter SHOULD NOT be used to cut: Metal Pipes, Cable Wires, and PVC Tubing.
  • EFIELD Pipe and Plastic Cutter Works with Pex-Tubing and Nylon-Tubing..
Check Stock