Categories

Best Tungsten Carbide Gritted Hole

Dremel 9909 Tungsten Carbide Cutter,Silver

  • The product is 1/8" Diameter, Tungsten Carbide Cutter.
  • Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
  • A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
  • Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
  • For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..
Check Stock

Blue Boar Master Plumbers Kit-12 Sizes Mega Tungsten Carbide 2-1/4” Hole Saws. Cut 10x Faster, 3x Larger, 40x More Holes Using Cordless Drills. For Plywood, MDF, Particle Board, Hardie Board.

  • 12 Carbide Hole Saws: 3/4", 7/8", 1-1/8",1-3/8",1-1/2",1-3/4",2-1/4", 2-5/8", 3", 3-1/2", 4", 4-1/2".
  • One 5/8"-18 arbor with 7/16" shank, 1/2"-20 adapter, hex wrench.
  • NOT NAIL RESISTANT - 3 pilot bits (HSS twist, Carbide Masonry, Tungsten Carbide Tipped for woods).
  • 2-1/4" cutting depth best when USED with 18v Cordless Drill set on SCREW SETTING.
  • ****NOT for use with 1/2" stud drills such as Milwaukee Hole Hawg which will rip the teeth off ****.
Check Stock

Diamond Tile Drill Bits Ceramic Diamond Glass Drill Bit Set 5 Pack 2 Carbide Drill Bits Ceramic Tile Drill Bits 3 Porcelain Granite Drill Bits and Drill Guide for Diamond Tip Drill Bit for Bottles

  • Tungsten Carbide Drill Bit For Ceramic Tile Bits For Drill Holes In Clay Plant Pots For Drainage 3/16″ And 1/4″ Ceramic Drill Bits For Tile . Tungsten Carbide Drill Bits have Self Centering Point for Drilling Holes in Ceramic Tile Marble Travertine and Slate..
  • Diamond Drill Bits For Glass 3/16 In 1/4″ In 1/2 Inch Drill Bit For Glass Drill Set. glass Drill Bit For Bottles Half Inch Glass Drill Bit With Guide For Drilling Hole In Glass Bottles And Glass Blocks For Tree Lights. Keep These Glass Hole Saw Drill Bit For Drilling Glass Cool With Water For Extended Life..
  • For Best Results Use The Diamond Drill Bit For Porcelain And The Spear Point Ceramic Tile Bit To Drill Tile. Use Diamond Bit To Drill Glass And Carbide Tipped Drill Bits With Any Battery or Electric Drill Hole Cutter Bits Must Be Used Wet. Carbide Ceramic Tile Drill Bit Set Can Be Used Dry If No Heat Builds Up..
  • Whilst The Tungsten Tile Cutting Drill Bits Can Be Used As Porcelain Tile Drill Bit The Diamond Tile Drill Bit Will Drill Holes In Porcelain Tile Faster And Last Longer As Long As Diamond Cutting Tip Is Kept Cool. Remove Diamond Tipped Drill Bit From Tile Hole Every 10 To 15 Seconds And Dip Diamond Porcelain Drill Bit Into Cup Of Water, Also Spray Water Into Ceramic Tile Hole To ....
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

  • ✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

  • ✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
  • ✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
  • ✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
  • ✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
  • ✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
  • ✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
Check Stock

REETAI-FOUR 10Pcs TCT Hole Saw Kit,Tungsten Carbide Tipped Hole Saw Set, Hole Cutter Heavy Duty for Stainless Steel.(5/8\-2-1/8”)

  • ...cs hole cutters with dimensions 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 30mm(1-1/8"), 35mm(1-3/8"), 45mm(1-3/4"), 50mm(2"), 53mm(2-1/8"),10 pcs pilot drill bits and 1 pc hex key.A variety of sizes to meet your different needs..
  • 【High Quality Material】：This hole saw is made from high quality Tungsten Carbide Tipped Cutters, ensures its high hardness, rust proof and sturdy.The high-end tungsten carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • [Application]: These Hole Saw Sets provide fast and precise cuts into 28MM thickness metal material, they are Industrial grade metal drilling hole cutter for stainless steel, metal, iron. It is also suitable for plastic, aluminum, FRP, etc. Remember to add coolant during continuous high-speed drilling..
  • 【Easy to Use】: TCT Carbide Steel teeth for fast cutting of clean and smooth round holes. They are suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【Sincere Service】: Drill bit, spring, wrench are included, which make your job more convenient and easier.The pilot drill bit is detachable.If you have any question about ....
Check Stock

TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, Iron, Wood and Aluminum

  • Safe & Durable: This carbide hole saw set uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and more efficient for cutting hard metal..
  • Fasting Cutting: Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications. This carbide hole cutter can precisely cut very smooth holes due to the concentricity rate..
  • Wide Application: 1/2 inch cutting depth makes this stainless steel hole cutter easy to pass through thick material such as: thick metal, stainless steel, iron pipes, aluminum, brass and sheet metal plate..
  • QUALITY MATERIAL: Our hole saw set are Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), Top-grade Titanium-plated cemented carbide Teeth ensures its high hardness, rust proof, sturdy and durable..
  • PACKAGE INCLUDES: The package includes 13 Pcs carbide hole saw: 16mm(5/8”), 18mm(45/64”), 20mm(25/32”), 22mm(55/64”), 25mm(63/64”), 26mm(1-1/32”) 28mm(1-7/64”), 30mm(1-3/16”), 35mm(1-3/8”), 40mm(1-37/64”), 45mm(1-49/64”), 50mm(1-31/32”), 53mm(2-3/32”). A variety of sizes to meet your different needs..
Check Stock

10pcs SDS Plus Concrete Hole Saw Kit Extension Shank Mansonry Cement Wall Drill Bit TCT Core Drill Set Tungsten Hole Cutter for Drilling Brick Concrete Cement Stone

  • [What You Will Get]: 35mm, 40mm, 50mm, 65mm, 82mm and 110mm core drill bits, SDS+ arbors, pilot drills and a 300mm SDS+ extension shank.
  • [Tungsten Carbide Tip Drill]: This top-of-the-line TCT (tungsten carbide tip) core set offers faster cutting speeds and longer service life, making....
  • [Technical Application]: 35mm-45mm hole saw extension concrete cement wall drill bit for drilling water pipe and heating pipe, 55mm-80mm drill for air....
  • [Durable Material]: This sds plus extension shank hole saw drill bits for concrete cement is very solid, using high-quality alloy welding, for the....
  • [Widely Used]: This masonry hole saw kit easily drills holes on common wall materials, such as brick, adobe, concrete, cement, and stone, widely used....
Check Stock

LENOX Tools Hole Saw, Carbide, 4-1/8-Inch (2996666CG)

  • Features a hard tungsten carbide grit cutting edge.
  • It will cut tough abrasive materials such as fiberglass, ceramic tile, laminates.
  • Carbide grit edge will not snag or chip when cutting thin materials.
Check Stock

Disston E0104578 1-1/4-Inch RemGrit Carbide Grit Arbored Hole Saws 32mm

  • Cutting edge of tungsten carbide particles bonded to alloy steel back.
  • High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting.
Check Stock

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

Barb Drill Bit, Multiple Sizes Tapered Hole Drilling with Center Punch for Metal Plastic Wood Plates

  • 10 TIMES LONGER LIFE than normal metal cutting hole cutters.
  • Our Tungsten Carbide Tipped Cutters are a superior alternative to conventional Bi-Metal Hole saws. They cut faster, cleaner, and last longer..
  • Tungsten cutters cut through, steel plate, iron, aluminium, copper, cast iron, and most importantly, stainless steel and other tough alloys..
  • The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..
  • With normal care, tool life is significantly longer than other hole cutting tools. Inexpensive resharpening will allow repeated use.
Check Stock

Rocaris 13Pcs 16mm-53mm Stainless Steel Carbide Tip Metal Drill Bit Hole Saw Set

  • 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and....
  • 【Top Quality】Made of YG8 tungsten carbide steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held....
  • 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient....
  • 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP,....
  • 【13 Different Size】Outside diameter Size: 16mm, 18mm, 20mm, 22mm, 25mm,26mm,28mm, 30mm, 35mm, 40mm,45mm, 50mm, 53mm.Wood can be drilled about 20mm....
Check Stock