Categories

Best Tungsten Carbide Insert

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

33 Pieces Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 30 CNMG 431 + WNMG 431 + TNMG 331 Metal Indexable Carbide Turning Insert Blades

  • ...6, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 3 pieces carbide inserts and 10 pieces CNMG 431,10 pieces WNMG 431, 10 pieces TNMG 331 metal indexable carbide turning insert blades, cufficient quantity and easy to replace.
  • Material: lathe indexable carbide turning tool holders are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability.
  • Size: diameter of the handle is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and accuracy have reached the first grade.
  • Easy to store: insert 30 pieces of cemented carbide into 3 boxes, and put them in a plastic container, safe and easy to store, compatible with MTJNL1616H16, MWLNL1616H08, MCLNL1616H12 or MTJNR1616H16, MWLNR1616H08, MCLNR1616H12.
  • Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
Check Stock

Upgraded Carbide Tipped Woodturning Tools Set, 6 IN 1 Lathe Rougher/Finisher/Dovetail/Swan Neck Hollower Wood Turning Tools, with Interchangeable Aluminum Alloy Grip Extension Handle and Wrench

  • Material:Tool bar：CNC machined 304 stainless steel,increase the stability and shock resistance；Handle：Ergonomics design makes it more comfortable while doing turning job；Carbide cutter：Tungsten carbide of high quality.
  • Indexable Replacement carbide insert design:matched with Round Carbide Insert (12×2.5mm-30°),many usable sides give you fresh edge for maximum cutter lif.
  • Handle：solid wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Dimension: Tool Bar 8.27"(210mm) ，Head 2.36"(60mm)， Overall length 19.69"(500mm).
  • Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • ...R06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, p....
Check Stock

Lansky PS-MED01 BladeMedic

  • Tungsten Carbide Tungsten Carbide- Just three or four strokes will restore your blade..
  • Ceramic Sharpening Rods- Tungsten Carbide Polish to a finished edge in three or four strokes..
  • Serrated Knife Sharpener- Designed to get inside even the smallest serrations..
  • Diamond Tapered Rod- For fast reconditioning and maintenance..
  • Sharpening angles are pre-set at 22. 5º to achieve a 45º inclusive angle.
  • Tungsten Carbide-Three Or Four Strokes Will Restore Your Blade.
  • Ceramic Sharpening Rods-Polist To A Finished Edge In Three Or Four Strokes.
  • Serrated Knife Sharpener-Designed To Get Inside Even The Smallest Serrations.
Check Stock

THREE KEYS JEWELRY 8mm White Tungsten Carbide Ring Wedding Engagement Band Silver Multi Faceted Fashion Band Silver Size 10

  • Material: Genuine Tungsten Carbide - Scratch Proof.
Check Stock

ELEPHAS- 15' planer woodworking spiral cutterhead 15 inch 4 rows 52 inserts

  • "Our Feature and Patent： The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The improved design helps users to install the carbide inserts correctly onto the insert seats.It is safer for the user and the machine by preventing the cutter from breaking inside the thickness planer.".
  • "Durable Materials： Our products are made of Tungsten Carbide and other materials which not only reduce noise and tear-out but also produce much smoother finish on difficult woods".
  • If one knife edge is dull or nicked, simply rotate to another edge. You'll only need to replace one insert when all 4 sides are out of use.".
  • "Excellent quality： We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high quality control, you can choose our products with confidence. ".
  • Including tool kit: two bearings: 6204+6205/ 10 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached to the product photos. If you have any questions, please provide the brand and model..
Check Stock

Dremel 9901 Tungsten Carbide Cutter

  • The product is Tungsten Carbide cutter 1/8″ Diameter with 1/8″ Shank.
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • ...R06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manual measurement and different display settings, p....
Check Stock

Makita 2 Pack 8 Pc - 3 1 4 Planer Blade Double Edge Set For Planers - Cutting For Hard Wood - 3-1/4\ Tungsten Carbide | 2-Piece Blade

  • 3-1/4-Inch Industrial Tungsten Carbide Hand Planer Blades.
  • Toughest, most durable planer blade available.
  • Lasts up to 30% longer than standard tungsten carbide blades.
  • 10% sharper than standard carbide blades.
Check Stock

IRONWALLS Carbide Wood Lathe Turning Tools Set, Carbide Tipped Turning Chisels for Lathe Include Finisher, Rougher, Detailer, Carbide Lathe Tools Woodworking with Interchangeable Handle & 8PCS Inserts

  • ...ely. Furthermore, this wood turning lathe kit includes 4pcs shafts with 8pcs carbide inserts, which does not need to frequently change inserts in complex turning tool projects so that improving the working efficiency..
  • 【Rotatable Blade Insert Design】Per piece of carbide insert tip is designed with four indexable tungsten carbide edges, which are sharp, solid and wear-resistant. When one edge of the cutter head is blunt, you can turn it to a new edge, which makes the blade can be used for a longer time, money saving. Furthermore, there are 8pcs carbide wood lathe tools blade inserts replacement per package, sufficient quantity for more woodworking lathe projects..
  • 【Excellent Craftsmanship】The aluminum alloy handle of this carbide wood turning chisels tools for wood lathe is sandblasted, which is comfortable, durable and scratch-resistant. Square stainless steel arbor can better keep the lathe tools flat on the tool holder without rolling level with the tool holder, increasing stability..
  • 【Wide Application】This carbide tipped turning chisels set has great performance on a lot of wood turning projects of all sizes. Very simple to use, suitable for all skill levels. Perfect gift for woodworkers, engineers and DIY enthusiasts..
Check Stock

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

NEPAK 4 Pack Tungsten Carbide Scriber with Magnet,with Extra 4 Replacement Marking Tip,Etching Engraving Pen for Glass/Ceramics/Metal Sheet

  • ▶Replaceable:4 Pack Tungsten Carbide Tip Scriber with 4 free replacements marking tip..
  • ▶Durable Material: The glass scriber has a durable tungsten carbide tip and an aluminum body, so it can easily handle hard materials including hardened steel, stainless steel, ceramic and glass. Disposable briquetting tungsten carbide blades are more durable than others and are not easy to drop..
  • ▶Magnetic: The permanent magnets on this etching tool pick up small parts and recover steel filings from hard-to-reach places..
  • ▶Comfortable Use: Convenient pen design and convenient pocket clip, knurled aluminum handle provides maximum control and comfort..
  • ▶Easy to Store: When not in use, the tip of tungsten carbide can be reversed..
Check Stock