Best Tungsten Welding
GOONSDS Tungsten Filament 99% Purity Tungsten Metal Wire Coil,Length 1m,Diameter 0.04mm
- Purity: W ≥ 99% . Dimensions: diameter:0.04-0.1mm(Buy on demand) , length:1m. Package: 1 x Tungsten wire.
- Tungsten and its alloys are widely used in electronics and power industry because of its strong plasticity, low evaporation rate, high melting point and strong electron emission ability. For example, due to its high luminous efficiency and long service life, tungsten filament is widely used in the manufacture of various bulb filaments, such as incandescent lamp, iodine tungsten lamp, etc,.
- Tungsten wire is used to make direct hot cathode and grid of electronic oscillator tube and side hot cathode heater in various electronic instruments. The properties of tungsten make it suitable for TIG welding and other electrode materials similar to this kind of work..
- It is widely used in aerospace, aviation, oil drilling, electrical instrument and other industries, such as manufacturing heat sink, balance weight of control rudder and contact materials of switch, circuit breaker, spot welding electrode, etc..
- We are a supplier of high quality metal materials. We can provide you with the materials you need. You can contact us to get any materials you need.
Check StockTOOLIOM TIG Welding Tungsten Electrode 2% Thoriated Tungsten 3/32'x 7' (Red, EWTh-2) 10-Pack
- Electrode Size: 3/32" x 7" or 2.4mm x 175mm.
- Material:2% Thoriated Tungsten (Red, EWTh-2) adhering AMERICAN Welding Society standard AWS A5.12M/A5.12:2009 conformance.
- Performance:Good welding performance,long life and operate easily.
- To be used on TOOLIOM TL-200T TIG Welder(High Frequency TIG Welding).
- Package:Ten (10) pack of premium thoriated tungsten rods ,vacuumed sealed, no oxidation,long time preservation.
Check StockPlasma Cutter Welder Combo Pulse TIG Welder Stick Welder 3 in 1 Welding Machine, 50A Plasma Cutting, 200A TIG Welding (Pulse), Arc/MMA Welder More Stable Arc Dual Voltage 110V/220V 520TSCPF
- ...portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
- ✅【 Pulse TIG Welder】10-200AMP DC TIG electric current output.
- The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life. Quality TIG welding on stainless or steel and precise welding of thinner-gauge materials. Easy work with foot-pedal (it is not included in standard accessories). Please make tungsten head sharp before using TIG welder, can get better welding in this way..
- ✅【STICK/MMA/ARC Welder】Output current 10-180Amps, Hot arc starting, Anti-Stick, Deep welding pool and nice welding surface and few spark. Suitable for welding different acid and basic welding rod size from #1.6mm to #4.0mm..
- ✅【Multiple Uses 】The welding machine suitable for weld stainless steel, alloy steel, carbon steel and nonferrous metals.
- ideal for a welding enthusiast or hobbyist with basic repair needs and general light welding requirements. We have 12 month warranty..
- ✅ 【 Package Content】1 X 2.5M PT-31 plasma cutter torch....
Check StockMardatt 8\ 6 Function MIG Welding Pliers, Dual-Sided Gage Standard Metal Gauge Measurement and Tungsten Carbide Scriber for Metal Sheet (3 Pack)
- What you Get: The welding tool set contains 8” mig welding pliers, metal welding gauge and tungsten carbide tip scriber. 3 pack of weld tool a set will help you work effortlessly. Ideal for Splatter Removal, Cleaning and Removing Rust, Hammering, Tip Removal/Install, Wire Cutting, Nozzle Removal/Install, Wire Draw Out, and More..
- Multi-Purpose Welding Pliers: The precise tooth pattern provide it strong clamping force, the jaws are very sharper and firmer, which improve efficiency. Multiple jaws for SIX Function: wire cutting, tip removal & installation, nozzle removal & installation, inside & outside nozzle cleaning, grooved tips for drawing wire..
- Practical Welding Gauges: Made of stainless steel with rust and corrosion resistance for long service time. It has more clear scales and easy to read the data.with laser engraving procession, the scale is clear. And they will not wear out. Dual-Sided Round Wire Gauge, 0-36 American Standard (AWG) and SAE.
- Ideal for measuring sheet, plate iron and steel, leather, wire, Bolt, screw, ect..
- Handy Tungsten Cardie Tip Scriber:The glass scriber features a durable tungsten carbide tip and an aluminum body, which is twice as hard as steel, so it can easily handle hardened steel, stainless steel, ceramic, glass an....
Check Stock2% Thoriated TIG Welding Tungsten Electrodes 3/32” x7” 10-Pack
- TOP QUALITY 3/32" 2% Thoriated Tungsten Electrodes for TIG Welding.
- TOP RATED Ten (10) Pack of 2% Thoriated Tungsten Electrodes.
- TOP VALUE Savings Up to 50% Off Other Marketplace Sellers.
- TUNGSTEN ELECTRODE SIZE: 3/32" x 7" or 2.4mm x 175mm.
- TUNGSTEN ELECTRODE MATERIAL: 2% Thoriated (Red) EWTh-2 Material Conforms to: ANSI/AWS A5.12, JIS, DIN EN 26848, ISO 6848..
Check Stock2% Lanthanated TIG Welding Tungsten Electrodes 3/32” x 7” 10-Pack
- TOP QUALITY 3/32" 2% Lanthanated Tungsten Electrodes for TIG Welding.
- TOP RATED Ten (10) Pack of 2% Lanthanated Tungsten Electrodes.
- TOP VALUE Savings Up to 50% Off Other Marketplace Sellers.
- TUNGSTEN ELECTRODE SIZE: 3/32" x 7" or 2.4mm x 175mm.
- TUNGSTEN ELECTRODE MATERIAL: 2% Lanthanated (Blue) EWLa-2 Material Conforms to: ANSI/AWS A5.12, JIS, DIN EN 26848, ISO 6848..
Check StockWeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod 2.0% Thoriated Red EWTh20 3/32 x 7 | 10-pcs
- Pack of 10-pcs premium TIG welding Tungsten electrodes 2.0% Thoriated. AWS Classification: EW-Th2 (Red). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD..
- Higher current range and stability. Better arc starts with lower tendency to spit. Medium erosion. Increased resistance to weld pool contamination..
- Available Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
- 10-pcs/box Tungsten electrodes (2.0% Thoriated EW-Th2) with quantity discount. Buy More Save More!.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check StockWeldingCity 10-pk Premium TIG Welding Tungsten Electrode Rod Pure Green EW-P 3/32 x 7 | 10-pcs
- 10-pcs premium TIG welding Tungsten electrodes pure (Tungsten >99.5%). Electrode diameter available: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm), 1/8" (3.2mm) and 5/32" (4.0mm).
- AWS Classification: EW-P (Green). Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD. Ground annealed..
- Better stability when used with alternating current. Lower current-carrying capacity and tends to spit at higher current. May balls easily. Low cost. Usually used for non-critical welds only..
- 10-pcs/box Tungsten electrodes (Pure EW-P). With quantity discount. Buy More Save More!.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stockbestarc TIG Welding Tungsten Electrode 2% Thoriated 3/32' x 7' (3/32'', Red)
- 2% Thoriated Tungsten Electrodes for TIG Welding (Red WT20).
- Good effect of welding stainless steel, adequate for DC welding.
- Wide application range, suitable for welding stainless steel / carbon steel / copper / iron / nickel and other metals.
- Longer storage time, sealed vacuum packaging to avoid oxidation.
Check StockMARSWARE TIG Welding Tungsten Electrode 10-Pack Rod Rare Earth Blend Tri-Element Non-Radioactive 0.040 ×7 Ground Finish Arc Starts Easier and More Stable Purple EWG
- 【Premium Quality Tungsten Electrodes】The tig welding tungsten electrodes rod is perfect for tig welding. Durable. Good conductivity. Arc starts easier and more stable. Hardness ensured..
- 【High temperature-resistant, Non-melting】98% Tungsten, 1.0% Lanthanum, 0.5% Zirconium, and 0.5% Yttrium, non-radioactive. Annealed brittled for easier sizing. Melting point can reach 3,410 degrees Celsius. Conform to ANSI/AWS A5.12M/A5.12:2009 ISO 6848:2004 MOD..
- 【A Wide Range of Suitable Base Metal Type】Good for stainless steel, copper alloys, carbon steel, nickel titanium, copper alloys, magnesium, aluminum and its alloys, etc..
- 【Upgraded Vacuum Package】10 pcs 0.04''(1.0mm)×7''(175mm) ground finish tungsten electrodes. Anti-oxidation vacuum packaging. Ensure product quality and longer preservation time..
- 【Worry-free Purchase】Selling directly from MARSWARE factory. Returnable within 30 days of receipt of shipment. Experienced and professional customer service team to help you solve any issue..
Check StockWeldingCity 10-pk Premium TIG Welding Tungsten Electrode 1/16'-3/32' x 7' ASSORTED ALLOYING Green-Red-Gray-Gold-Blue
- Premium TIG welding Tungsten electrodes. Conform to ANSI/AWS Standard A5.12M/A5.12:2009 ISO 6848:2004 MOD..
- Available Tungsten alloying: 2.0% Thoriated (EW-Th2/Red), 1.5-1.8% mixed tri-oxides of Lanthanum, Zirconium and Yttrium (EWG/Purple, non-radioactive), 2.0% Lanthanated (EW-La2/Blue), 2.0% Ceriated (EW-Ce2/Gray), 1.5% Lanthanated (EW-La15/Gold) and Pure (EW-P/Green)..
- Tungsten electrode diameters: 0.040" (0.5mm), 1/16" (1.6mm), 3/32" (2.4mm) and 1/8" (3.2mm).
- Packages available: 10-pcs electrodes of 0.040", 1/16", 3/32" and 1/8" with different alloying assortedly packed in one box. With quantity discount. Buy More Save More!.
- U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock10 MIG Spool gun fits Miller Millermatic 141/190/211 Multimatic 200/215/220 Aluminum welding
- Weldpro's flagship 200 amp MIG welder that goes beyond MIG and Flux Core welding! AND 3 YEAR WARRANTY!.
- The model 200 is also capable of true lift TIG welding (without foot pedal) as well as stick welding and aluminum welding with the optional spool gun.....
- MIG,Stick or TIG weld all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A.
- MIG welding wire diameter: .023 .030 .035, welding thickness: 19ga- 0.197 in.
- TIG tungsten needle diameter: 0.063 0.094, welding thickness: 25ga- 1/4....
- Dual digital display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with....
Check StockMARSWARE TIG Welding Tungsten Electrode Rod 2% Thoriated 3/32''×7'' (Red, WT20) 10-pack Ground Finish Arc Starts Easier and More Stable
- 【Premium Quality Tungsten Electrodes】:The tig welding tungsten electrodes rod is perfect for tig welding. Durable. Good conductivity. Arc starts easier and more stable. Hardness ensured..
- 【High temperature-resistant, Non-melting】:2% Thoriated. Annealed brittled for easier sizing. Melting point can reach 3,410 degrees Celsius. Conform to ANSI/AWS A5.12M/A5.12:2009 ISO 6848:2004 MOD..
- 【A Wide Range of Suitable Base Metal Type】:Good for Stainless steel, carbon steel, nickel titanium, copper and its alloys, etc..
- 【Upgraded Vacuum Package】:10 pcs 3/32''(2.4mm)×7''(175mm) ground finish tungsten electrodes. Anti-oxidation vacuum packaging. Ensure product quality and longer preservation time..
- 【Worry-free Purchase】: Selling directly from MARSWARE factory. Returnable within 30 days of receipt of shipment. Experienced and professional customer service team to help you solve any issue..
Check Stock