Categories

Best Turbo Cutting Saw

LSA 14 Inch Concrete Saw Diamond Blade,U Shape Carbide Tipped 14 Inch Turbo Segmented Saw Blade,for Concrete Block,Paving Brick,Reinforced Concrete

  • 【Specifications of 14 Concrete Saw Blade】 Segment height 12mm. Arbor 1 inch -25.4mm. MAX RPM 5460 r/min.The holes on core decrease weight and improve cooling,turbo blades remove the debris easily..
  • 【Diamond Sand】 The high density of emery makes the LSA 14 in. segmented diamond blade tip super hard to achieve fast cutting, smooth cut without burrs,extremely fast cutting speed..
  • 【Wet and Dry】 The LSA 14 diamond blade concrete dry cut ensures a smooth cut, while the wet cut gives you the same feeling as cutting butter to maximize cutting life while reducing the cost per cut..
  • 【Applicable Cutting Materials】Concrete block,paving brick,cured concrete,reinforced Concrete can be cut with 14 inch diamond blade stones, but not for cutting metal, plastic, glass..
  • 【Applicable Models】Hand held saw,masonry saw and walk behind saw.Premium diamond U shape teeth can less stress on the operator and machine..
Check Stock

7 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade, Dry or Wet Cutting Ceramic Granite Marble

  • 【SPECIFICATIONS 】: Diameter: 7 Inch(180mm).
  • Thickness: 0.06 Inch(1.6mm), Up to 8,600 maximum RPM. This diamond blade fits for most tile saws and handheld angle grinders..
  • 【Super thin turbo mesh design 】 : Super thin turbo mesh rim diamond blade can provide you with a fast, precise, smooth and chip-free cutting experience. Thicker center to avoid vibrations and wobbling..
  • 【Work efficiently】: The tile blade is suitable for wet and dry cutting, and wet cutting effect is better, can extend the service life of saw blades, X mesh turbo wave is conducive to cooling and provides high-efficiency cutting efficiency..
  • 【Material】: The diamond cutting wheel is made of high quality diamond, impact-resistant and high-temperature resistant..
  • 【Widely Application】: Our grinder blade are specially designed for cutting porcelain, brick, ceramic tile, granite, sandstone quartz, marble, , slate, cement backer board..
Check Stock

SHDIATOOL 4-1/2 Inch Porcelain Diamond Mesh Turbo Saw Blade Cutting Granite Marble Ceramic Tile Brick Pack of 2

  • 2pcs 4.5" Hot pressed sintered Mesh Turbo Diamond Saw blade with rim segment for cutting.
  • Diameter 4.5"/115MM, Bore 22.23MM with 22.23-20mm washer, Diamond height 10MM, Segment thickness 1.6MM..
  • Remark: Please remove the 22.23-20mm washer,if you fit the 7/8” arbor..
  • Dry or wet cutting for Hard material, granite marble tile ceramic brick.
  • New Design of Mesh turbo rim segment, the mesh turbo help to cooling and bring the dust out, so more efficient, fast and stable in cutting.
Check Stock

7 Inch Super Thin Diamond Tile Blade Porcelain Cutting Blade Set of 2 Pieces, Dry or Wet Cutting Ceramic Granite Marble

  • Super thin turbo mesh design: Super thin turbo mesh rim diamond blade can provide you with a fast, precise, smooth and chip-free cutting experience..
  • Efficient: The tile blade is suitable for wet and dry cutting, and wet cutting effect is better, can extend the service life of saw blades, X mesh turbo wave is conducive to cooling and provides high-efficiency cutting efficiency..
  • Application: Our diamond blade are specially designed for cutting porcelain, brick, ceramic tile, granite..
  • Material: The diamond cutting wheel is made of high quality diamond, impact-resistant and high-temperature resistant..
  • Thickness: 0.06 Inch(1.6mm), Up to 8,600 maximum RPM. This diamond blade fits for most tile saws and handheld angle grinders..
Check Stock

BRSCHNITT Diamond Blade Set,4-1/2 Inch Arbor 7/8" - 5/8" for Granite,Stone,Masonry,Terrazzo,Paver,Concrete,Pack of 2 Dry/Wet Circular Saw Cutter Angle Grinder Diamond Cutting Disc 115mm

  • ✔Size --Total 2pcs,4 1/2"(115mm),segment height 7mm ,turbo rim segment thickness 2.2mm ,segmented rim segment thickness 2mm,Arbor 22.23mm(7/8-Inch) ,includes a 20mm(4/5") and 16mm(5/8") arbor adapter Bushing in the package.
  • ✔Our diamond cutting wheel are designed to provide fast, smooth and extremely clean cutting in a variety of materials, including masonry brick, granite, marble,concrete,stone,slate and stucco.
  • ✔Turbo rim diamond cutting saw blade and general purpose power saw segmented diamond blade for smooth & fast cutting of Granite,Stone,Masonry,Terrazzo, Paver,Concrete.
  • ✔Our blades are suitable for Dry or Wet Cutting,More efficient by Dry Cutting and Wet Cutting for long life time.
  • ✔Machine --For use on Tile saws, circular saws, and angle grinders.It is suitable for 7 / 8 "inner hole machine, also suitable for 4/5" or 5 / 8 "inner hole machine through arbor adapter Bushing.
Check Stock

GoYonder Super Thin 4.5\ Grinder Blades Tile Blade, Diamond Saw Blade for Cutting Porcelain Tiles Granite, 115mm Tile Cutting Blade for Angle Grinder

  • ...zes to choose, the size is: 115 x 10 x 1.2 x 22.23mm, Thickness: 1.2mm, Outer Diameter:115mm /4.5 inch, 7/8” arbor, Diamond concrete saw blade has a tough body with 1.22mm thickness..
  • 【Grinder Blades Wet & Dry】: This tile blade 4.5 features a 10mm diamond rim, Super thin porcelain saw blade with free chips for cutting, Matched with hand-held machine with a 7/8" or 5/8" Arbor, It can be used on different types of angle grinders and tile cutters, Ideal for Wet and Dry cutting. Furthermore, it is easy to install and ready to use..
  • 【Turbo Rim Design 】: The wet tile cutting blade has turbo rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. They have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
  • 【High Performance】: Diamond saw blades comes with X teeth offer fast and smooth cutting. High-Performance diamond matrix provides long life and enhanced material removal. this blade cuts through porcelain like butter. 1.2mm thickness can keep staying original diameter makes it easier to make straight cuts and deeper cuts..
  • 【Widely Applications】: Our Grinder blade can be availab....
Check Stock

SKIL 79510 7-Inch Turbo Rim Diamond Saw Blade with 5/8-Inch or Diamond Knockout Arbor for Masonry

  • Diamond knockout that fits on dry cutting saws.
  • Fifty times longer life than standard abrasive blades.
  • For use on cutting cement block, fiber cement board, ceramic tile and other masonry materials.
  • Turbo rim diamond saw blades measures 7-inches.
Check Stock

Bosch 5-Piece 12-Inch 5 TPI Wood Cutting Reciprocating Saw Blades RP125

  • TOUGH: Designed for pruning and wood cutting, the 5-piece RP125 saw blade set delivers fast, long lasting performance..
  • LONGEVITY: The Bosch RP125 Reciprocating Saw Blade Set features Turbo-Teeth technology so the blades last up to 3X longer than standard reciprocating saw blades..
  • PRECISION: The blades are designed for extreme cuts for tough applications and deliver the best performance for pro-cutting applications..
  • CONVENIENT: The five blades of the set are color-coded grey for easy identification..
  • VERSATILITY: With this set users can choose from blades suited for occasional, standard, heavy or demolition use in a variety of materials such as wood with nails, metal, stainless steel, cinder block, cement board or fiberglass..
Check Stock

SHDIATOOL Diamond Saw Blades Cutting Discs Set Segmented Cutter Wheel for Tile Ceramic Porcelain Marble 7/8\ or 5/8\ arbor 6 Pieces 4-1/2 Inch

  • Wet or dry cutting, For 7/8" or 5/8" Arbor(Adapter included for 5/8"),sutiable for angle grinder.
  • Blades Kit contains: continuous tile blade/segmented concrete disc/turbo rim granite saw bladeper 2 pieces.
  • 2 pieces continuous rim wheel For Smooth cutting of Tile,Ceramic,Marble,Granite.
  • 2 pieces segmented rim For Fast general purpose cutting for Concrete,Paver,Masonry,Terrazzo,Stone.
  • 2 pieces turbo rim For smooth & fast cutting of Granite,Stone,Masonry,Terrazzo,paver,Concrete.
Check Stock

7" Diamond Turbo Blade Granite Diamond Blade for Granite Marble Porcelain Tile Wet/Dry Cutting

  • Thin turbo rim and core for a fast,clean chip-free cut..
  • Can be used on an angle grinder, circular saw, masonry saw and gas cut-off saw.
Check Stock

DT-DIATOOL Turbo Mesh Diamond Blade 10 Inch with X Rim Segment for Tile Porcelain Ceramic

  • QUALITY MATERIAL: Gunpla diamond cutting blades are manufactured with high quality and durable heat-treated manganese steel and diamond. This angle grinding set has 3 of the most used cutting saws to make sure you are always ready for any project..
  • 3 PIECES SET: The includes 1 continuous rim for smooth cutting of marble, granite, tile & ceramics, 1 segmented rim for fast cutting for masonry, concrete, pavers, terrazzo, roof tile and 1 turbo rim diamond cutting saw blade..
  • CONVENIENT CUTTING: Fashioned to provide exceptional and efficient cutting performance, Gunpla diamond grinding saw blades ensure quick and precise cuts with clean and perfect results..
  • PERFECTLY HONED: Our cutting diamond blades perfectly sharpened to ease use and can be used several times before any new honing. They have a thinner kerf that favors increases the cutting speed and minimize dust..
  • IDEAL FEATURES: Diameter: 115mm (4.5inch).
  • Arbor size: 7/8 inch(22.2mm) with reduce ring 5/8 inch(16mm).
  • Speed max. 80m/s and can used dry or wet. Balanced plate reduces vibration for improved accuracy and better finish..
Check Stock

4.5 Inch Diamond Blade, Diamond Turbo Saw Blade for Angle Grinder, General Purpose Cutting Concrete, Masonry, Brick, Granite, Marble and Other Stone, Wet/Dry Cut, 7/8\ Arbor

  • Manufacturing Technique: Sinter Hot-pressed Segmented Diamond Saw Blade. It achieves a faster cutting speed and longer cutting life-span in different materials..
  • Superior Quality designed for fast speed and stable life to Cut Concrete, Masonry, Brick, Granite, Marble and Other Stone materials..
  • The diamond turbo cutting blade is suitable to be used on the angle grinders, circular saws, tile saws, hand-held power saw. Please follow the safety symbols before the cutting work starts..
  • It’s Universal application in dry or wet cutting..
  • Segment Height: 10mm, Arbor Size: 7/8” with 5/8” copper bushing..
Check Stock

Stadea SBD103C Diamond Saw Blade 5-Inch Continuous Turbo For Grinder - Granite Dry Cutting, 8 MM Segments

  • Stadea Series Standard G - 5" Turbo continuous Diamond Saw Blade designed for Granite dry cutting.
  • Built with high quality diamond with less wide turbo segments for smooth faster cut to avoid chipping on Granite and other hard stone dry cutting.
  • 8 MM high thick segments for smooth cut and longer life, Max RPM 12000.
  • Smooth cuts on Granite and other hard stone, A real time saver for professional stone fabrication.
  • Quad hole to connect flush cut adapter for flush cuts, 5/8" to 7/8" arbor hole.
Check Stock