Categories

Best Turbo Inlet Hoses

Compatible/Replacement for CHEVY/GM TURBO TH-350 TRANSMISSION KICKDOWN CABLE KIT

  • 【1 x T3/T4 Hybrid Turbo Charger】: Power performance output capability = 25-35 psi. CNC machined flanges..
  • 【Turbo Specification】: Inlet Diameter: 3″, Outlet Diameter: 2″, Oil Inlet: 1/8 NPT, Compressor Wheel: .55 Trim, A/R Compressor: .50 A/R, A/R Turbine: .63 A/R.
  • 【Turbocharger Overall size】: 270*220*220mm.
  • 【Applications】：Perfect for any 4-6 cylinder applications. Perfect for 4/6 cylinder 1.5L-2.5L engines.
  • 【Notice】: This is universal turbo kit. It will work for whatever you have the skill for. This is NOT specific to ANY vehicle.Professional installation is highly recommended (No Instruction Included).
Check Stock

Cen-Tec Systems 95798 Quick Click Dust Collection Separator, Black

  • ...e separator easy and efficient with minimal need for adaptors or duct tape. Both the intake and outlet to the vacuum are designed to be compatible with industry standard wet-dry domestic vacuums and their hoses like Rigid, Shop Vac, Vacmaster, Dewalt, and many other brands. The hoses will fit male into the 2.375” inlet. The outside of the inlet and exit to the vacuum are designed to accept popular 2.5” dust collection wire support hoses commonly used in home and commercial workshops.
  • Commercial grade rubber mounting gasket insures against air leaks that can rob performance.
  • Ideal for use in a broad range of applications including woodworking, auto body detail shops, commercial painters, sheet rock installation and repair, remodelers, construction clean-up contractors, stone counter top production shops, hard wood floor refinishers, liquid capture, gardening, and slurry collection.
Check Stock

SuperATV UTV Cab Heater for 2019+ Polaris RZR XP Turbo / 2019+ Polaris RZR XP 4 Turbo | Windshield Defrost | 360° Adjustable Vents | Adjustable Temperature & Fan Speeds | Built-In Shutoff Valve

  • 【Fits】2019+ Polaris RZR XP Turbo / 2019+ Polaris RZR XP 4 Turbo | NOTE: Not compatible with machine with a speaker under the glove box..
  • 【Stay Warm All Winter Long】Our SuperATV UTV Cab Heater Kit redirects your Polaris RZR XP Turbo engine heat to warm your cab all winter long. Mounted under the dash between the driver and passenger, this UTV Heater Kit is capable of 14,600 BTU at 135 CFM. The heater draws 3.4 Amps at 13.7 Volts at full fan speed..
  • 【Features】Our UTV heater install kit features 360° adjustable vents and a built-in shutoff valve, and high-grade radiator hoses rated -40°F To 285°F. The cab heater kit also includes defroster hoses to keep your windshield clear in frosty conditions!.
  • 【Dimensions】This RZR XP Turbo dash heater control box measures 10" X 4.5" X 11.75"..
Check Stock

SuperATV Polaris RZR XP Turbo S Cab Heater for 2018+ Polaris RZR XP Turbo S | 2019+ Polaris RZR XP 4 Turbo S | Adjustable Temperature and Fan Speeds | Built-in Shutoff Valve

  • 【Fits】2019+ Polaris RZR XP Turbo / 2019+ Polaris RZR XP 4 Turbo | NOTE: Not compatible with machine with a speaker under the glove box..
  • 【Stay Warm All Winter Long】Our SuperATV UTV Cab Heater Kit redirects your Polaris RZR XP Turbo engine heat to warm your cab all winter long. Mounted under the dash between the driver and passenger, this UTV Heater Kit is capable of 14,600 BTU at 135 CFM. The heater draws 3.4 Amps at 13.7 Volts at full fan speed..
  • 【Features】Our UTV heater install kit features 360° adjustable vents and a built-in shutoff valve, and high-grade radiator hoses rated -40°F To 285°F. The cab heater kit also includes defroster hoses to keep your windshield clear in frosty conditions!.
  • 【Dimensions】This RZR XP Turbo dash heater control box measures 10" X 4.5" X 11.75"..
Check Stock

General Motors 13251447, Engine Coolant Recovery Tank Hose

  • 13251447 Inlet Hose also know as 13251447 Coolant Hose, OEM NEW Radiator Upper Inlet Coolant Bypass Hose, Brand New Replacement Coolant Bypass Inlet Hose,Air Bleed Hose From Outlet To Coolant Reservoir..
  • 13251447 Inlet Hose for General Motors Replaces part numbers: 13251447, 13408385. Cruze. Fits 2011-2016 Chevrolet Cruze 1.4L Turbo..
Check Stock

SuperATV Cab Heater for a 2021+ Polaris RZR Trail 900 Sport/S 900 Sport/S 1000 Ultimate/Premium (see fitment) | 3.4 Amps at 13.7 Volts | Built-in Shutoff Valve | 360 Degree Adjustable Vents!

  • 【Fits】2019+ Polaris RZR XP Turbo / 2019+ Polaris RZR XP 4 Turbo | NOTE: Not compatible with machine with a speaker under the glove box..
  • 【Stay Warm All Winter Long】Our SuperATV UTV Cab Heater Kit redirects your Polaris RZR XP Turbo engine heat to warm your cab all winter long. Mounted under the dash between the driver and passenger, this UTV Heater Kit is capable of 14,600 BTU at 135 CFM. The heater draws 3.4 Amps at 13.7 Volts at full fan speed..
  • 【Features】Our UTV heater install kit features 360° adjustable vents and a built-in shutoff valve, and high-grade radiator hoses rated -40°F To 285°F. The cab heater kit also includes defroster hoses to keep your windshield clear in frosty conditions!.
  • 【Dimensions】This RZR XP Turbo dash heater control box measures 10" X 4.5" X 11.75"..
Check Stock

Beaquicy Washer Stainless Steel Hoses with 90 Degree Elbow - 4 Ft Long Red and Blue (2 Pack) Burst Proof - Hot and Cold Striped Water Supply Lines for Washing Machine - 10YEAR WARRANTY

  • ... ✅ 【CONVENIENCE INSTALLATION】:Unplug the washing machine and turn off the water supply before making any repairs.First remove the old hose from the water supply faucet, and screw the new stainless washer supply hoses to the water supply faucet.Then find the hot and cold water inlets on the washer, and hand-tighten the other end of the new water inlet hose to the corresponding water inlet of the washer..
Check Stock

WORKSHOP Wet Dry Vacuum Accessories WS25022A Extra Long Wet Dry Vacuum Hose, 2-1/2-Inch x 20-Feet Locking Wet Dry Vac Hose for Wet Dry Shop Vacuums

  • Using the included adapters This wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening including workshop wet/dry vacuums..
  • Locking tab allows the wet dry Vac hose to easily detach for storage unlike some shop vacuum hoses.
  • 2-1/2-inch diameter vacuum attachments allows for larger sized debris collection and maximum airflow.
  • Wet Dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening.
  • 2-1/2-Inch x 20-Foot Locking hose provides extended reach, and locking tab keeps hose connected to the wet dry vacuum cleaner during use.
  • Using the included adapters this wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening including WORKSHOP wet/dry vacuums..
  • Locking tab allows the wet dry vac hose to easily detach for storage unlike some shop vacuum hoses.
  • Wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening.
Check Stock

4FT Stainless Steel Washer Hoses with 90 Degree Elbows by Beaquicy - 2 Pack No-Lead Burst Proof Hot & Cold Water Connection Inlet Washer Supply Lines

  • ... ✅【Easy to Install】---Unplug the washing machine and turn off the water supply before making any repairs.First remove the old washer water lines from the water supply faucet, and screw the new stainless steel washing machine hose to the water supply faucet.Then find the hot and cold water inlets on the washer, and hand-tighten the other end of the new water inlet hose to the corresponding water inlet of the washer..
Check Stock

MotoAlliance Firestorm Pro UTV Cab Heater Kit for Polaris RZR 1000

  • 2014-2018 RZR XP Turbo (will NOT fit RZR XP Turbo S).
  • SPECS: Heat Output - 14,600 BTU at 135 CFM.
  • Heater Box Dimensions 10" x 4.5" x 11.75".
  • VERSATILE: 360 degree adjustable vents/louvers.
  • QUALITY: High-grade radiator hose rated -40 to 120 C.
  • INCLUDES: Defrost duct hoses, vents, connectors, radiator hoses, wiring harnesses, installation hardware and instructions.
Check Stock

Shark Industrial Steam Dryer Installation Kit - 6FT Stainless Steel Braided Hose with 3/4' FHT 90 Degree Elbow and 1FT Inlet Hose 3/4' FHT with Y-adapter

  • ONE SET of 304 stainless steel braided premium steam dryer installation kit including one 6FT hose and one 1FT inlet hook up hose with one Y-adapter..
  • BURST PROOF - Designed to last, our hoses use true 304 stainless steel for braided outer protective cover which last incredibly long time for effective protection against rust and burst. Some other hoses are not using 304 stainless steel for the braided cover and could result in rust even burst..
  • INDUSTRY STANDARDS - Our hoses comply with following standards: ASME A112.18.6-2017/CSA B125.6-17, NSF/ANSI 61,372.
  • UNIVERSAL FIT - Our hoses have standard 3/4" FHT(Female Hose Threaded) or FGH(Female Garden Hose) connector fittings for both 1FT inlet fill hose and 6FT long hose connecting to steam dryer. The Y-adapter has standard MGH connection. Easy installation for home laundry room water supply lines..
  • MONEY BACK GUARANTEE - We offer 100% money back gurrantee with no questions asked. This great product also comes with 10-year warranty for quality related issues because we are so confident about our product quality. Rest assured for your purchases..
Check Stock

WORKSHOP Wet Dry Vacuum Accessories WS25021A 13-Foot Wet Dry Vacuum Hose, Extra Long 2-1/2-Inch x 13-Feet Locking Wet Dry Vac Hose for Wet Dry Shop Vacuums

  • Using the included adapters This wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening including workshop wet/dry vacuums..
  • Locking tab allows the wet dry Vac hose to easily detach for storage unlike some shop vacuum hoses.
  • 2-1/2-inch diameter vacuum accessories allows for larger sized debris collection and maximum airflow.
  • Wet Dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening.
  • 2-1/2-Inch x 13-Foot Locking hose provides extended reach, and locking tab keeps hose connected to the wet dry vacuum cleaner during use.
  • Using the included adapters this wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening including WORKSHOP wet/dry vacuums..
  • Locking tab allows the wet dry vac hose to easily detach for storage unlike some shop vacuum hoses.
  • Wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening.
Check Stock

Raspy Exhaust Notes

  • Made of light weight aluminum CNC Machined from 6061 T-6 Aluminum.
  • Easy installation,Universal Fits for all vehicle.
  • Do not fit piping inlet which is more than 2.5inch.
  • Sounds like a turbo vehicle with the turbo system or blow off valve..
  • In package:1 pc Turbo Sound Simulator Whistle.
Check Stock