BLACKHORSE-RACING Turbo Charger Oil Drain Return Line Oil Feed Complete Kit T3 T4 T04E T60 T61 T70 Silver
- Will work with T3 T3 T04E T61 T601 T70 turbo.
- Comes with 17" braided oil drain return line (comes with AN10(-10AN) fittings for return line kit,oil line covered with high quality woven Stainless steel for racing and aggressive look.).
- Circulate oil to the oil pan (only for metal plates).
- It helps to circulate oil from the turbocharger to the oil sump. The kit provides an anodized appearance that provides optimum cooling performance on a turbocharger for long life.And special designed inlet adapter limits oil flow ,effectively prevent blown oil seal caused by excessive oil pressure.
- Comes with gasket,screws/washer,all fitting are made of high quality aluminum.No Instruction Included, Professional Installation is Recommended!.
Check StockAutoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft
- ... pressure: 3000 psi. Bursting pressure: 10000psi. .
- 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
- 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check StockBentolin High Pressure Oil Pump HPOP Quick Disconnect Tool Compatible for Ford 6.0L 7.3L Powerstroke
- Fitment: F250 F350 F450 F550 E250 E350 E450 T444E FSD ESD 6.0L and 7.3L.
- Designed to disconnect high-pressure oil rail supply line from the fuel rail when removing the fuel injectors.
- This disconnect tool also can be use for disconnecting the turbo oil feed line & the under-valve cover oil rails that feed the injectors..
- Use fuel line disconnect tool Will help you speed up the time it takes to remove injectors..
- Metal construction for durability , STC Disconnect, Easy To Use.
Check StockGM Parts 12345982 Supercharger Gear Oil
- Fantastic design places turbo on the passenger side, very strong manifolds.
- Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.
Check StockICT Billet LS Truck Turbo Oil Drain Pan Adapter -10AN Hose to Oil Pan 551208
- Connect a -10AN Oil Return Line to your Oil Pan.
- Made in Wichita Kansas From Aerospace Grade USA Produced Billet Aluminum.
- Compatible With Low Oil Sensor Hole in Oil Pan.
Check Stock
20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black
- ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
- ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
- ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
- ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
- ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check StockGM 4.3L Turbo Kit Hot Parts T3 Cast 4.3 GMC Chevy Turbocharger V6 Wastegate Oil
- Fantastic design places turbo on the passenger side, very strong manifolds.
- Parts Included:TurboCharger -cast t3 wastegate block -35/38mm wastegate -pair of cast manifolds -Crossover pipes -Oil line kit.
Check Stock
3Ft 6AN 3/8" Fuel Line Hose Braided Stainless Steel W/2pcs AN6 Hose Fitting Kit Blue & Red Universal for Racing Fuel, Gas, Coolant etc
- Stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas ,vacuum, hydraulic fluid, lube, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, ls swap fuel line..
- Braided Steel Fuel Line Maximum Working Pressure (psi): 1000 psi. Bursting Pressure(psi): 6000psi. Working Temperature Range: -40℉ to 257℉(-40℃ to 125℃). Please make sure the pressure and temperature range is suitable for your application before purchase..
- Include a universal 3Ft fuel hose and 2pcs swivel hose ends.
- Inner Diameter: AN-6 (3/8") - Outer Diameter: AN-9 (9/16").
- Double stainless steel braid cover for excellent flexibility and resistance to abrasion. This hose is perfect for extreme environments where there is extra heat or where chaffing might occur..
- Professional installation is highly recommended. Warranty: CarBole offers 3-month warranty for the steel braided hose..
Check Stockhd-line Dymo Labels for Labelwriter 99012 - 10 Rolls Pack Labels x 260 Pieces Each Roll = 2600 Labels Self-Adhesive Compatible for Dymo Labelwriter & Seiko Label Printers 89 x 36 mm
- HD Line labels are 100% compatible with the original DymoLabels. There are 260 labels in a roll. In a pack of 10, 10 rolls = 2600 labels..
- Direct thermal printing prevents messy and expensive ink or toner. Labels peel off easily and use for quick and precise labelling..
- Direct thermal printing technology prints without smudging or smearing. Permanent labels are resistant to water, oil, heat and crack..
- Compatible Label Printers: DYMO LabelWriter 310, 320, 330, 330 Turbo, 400, 400 Turbo, 400 Twin Turbo, 400 Duo, 450, 450 Turbo, 450 Twin Turbo, 450....
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of....
Check StockmaXpeedingrods New T3 T4 T04E A/R.63 V-band Turbo 420+HP STAGE III Turbo Charger + Universal Oil Drain & Return Feed Line Kit
- OIL RETURN LINE: Length: 550mm || Inner Diameter: 21mm* OIL FEED LINE: Length: 1000mm || Inner Diameter: 14mm.
- Perfect for all 4 or 6 CYL, 1.5L-2.5L engines.
- Horse Power: Capable of Boosting Horse Power up to 420HP.
- Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns & Exhaust (Downpipe) Flange: V-Band Flange.
Check Stock
Byredio 3/8 Fuel Line Braided 6AN 10ft Transmission Cooler Hose for Oil,Gas,Fuel,Hydraulic 350-1400 psi High Pressure & Tamper Resistant (8.71mm ID)
- ... ✅NYLON BRAIDED - The braided fuel line can stand-104ºF to +302 ºF/-40ºC to +150ºC, 350 PSI Working Pressure Tolerance, the fuel line has good retardancy and excellent corrosion resistance.Best for the brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect...
- ✅WIDE APPLICATION - The 6an fuel line specially designed to compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85..
- ✅CUT THE SIZE AS YOU WANT - The 6an fuel line is 10 Feet / 3 m, can be cut to size for all your applications. Our braided fuel line is also an excellent alternative to conventional fuel lines, the 6an hose can be applied to higher-intensity temperature and pressure environments. Oil resistant, cold-resistant, and ethanol tolerance..
- ✅FLEXIBILITY - The highlight of this fuel line is its sublime pliability. Steel, aluminum, or plastic lines will not bend as easily as this tube. The superior bending ability ....
Check StockEVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black
- The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for....
- 10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our....
- These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle....
- Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't....
- EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock
LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)
- This PTFE Nylon Braided Fuel Hose are specially designed to work in any automotive project. this hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility..
- PTFE Nylon Braided fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
- Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
- This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
- 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
Check Stock
