Categories

Best Turbocharger Downpipe Gasket

EVIL ENERGY V Band Clamp with Flange Male Female Stainless Steel 3.0 Inch

  • [Size] Joins 3.0" OD pipe to 3.0" OD pipe. T-Bolt thread size: M8*1.25..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even....
  • [Feature] Male female flanges are sealed without gaskets to ensure proper alignment of the flanges inside the clamp for easy installation..
  • [Material] Stainless steel clamp and flanges.
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

Dorman 667-203 Turbocharger for Select Buick / Chevrolet Models

  • Direct replacement - this turbocharger is built to match the performance of original equipment for specific vehicles.
  • Complete kit - comes with turbocharger and gasket kit for added convenience.
  • Thoroughly tested - part has undergone fit, performance and corrosion testing to ensure longevity and reliability.
  • Repair tip - also replace oil and coolant inlet and drain tubes (not included) to ensure turbo function.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Enrilior Subaru Downpipe 5 Bolt to v Band,TD04 5 Bolt Turbo Downpipe Flange to 3in V-Band Conversion Adaptor Fit Compatible with Subaru WRX 14412AA451

  • Made of high quality stainless steel material, high strength and toughness..
  • It has strong impact resistance and scratch resistance, and has both moisture and corrosion resistance..
  • This adapter flange converts the standard TD04 5 bolt turbine casing downpipe to a 3in V-band..
  • The outer 5 holes are used to bolt the flange and then convert the turbocharger exhaust to 3in..
  • Good sealing, which can eliminate leakage caused by poor welded joints..
Check Stock

X AUTOHAUX 2pcs Exhaust Manifold Downpipe Gasket for BMW 320i 1991-1997 18301716888

  • This exhaust gasket is made of material. It has great durability, is firm and not easy to crack..
  • The exhaust pads are flexible and can be reused. It does not require a sealant and the performance is good..
  • Fit for 1991-1997 for BMW 320i, 1995-1997 for BMW 323i 2.5L, 1991-1997 for BMW 325i, 1995-1997 for BMW 328i, 1990-1995 for BMW 520i 24V, 1990-1995 for....
  • Package Includes : 2 pcs Exhaust Downpipe Gasket.
Check Stock

Mounting Bungs and Plugs Stainless Steel M18 x 1.5 Thread Notched Style Exhaust Weld in Bung with Gaskets 2 Sets

  • The mounting bung is made of stainless steel, easy to weld on exhaust, headers, down pipes, etc..
  • Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • The bung cap can be used to seal sensor bungs that are not being used in the exhaust system. The gasket helps create a tight seal to prevent any....
  • The M18*1.5 bung features a notched style, making it easy to weld by having the curve sit against the rounded surface of the exhaust or downpipe..
  • The weld in bung and plug set features a straight thread size of M18*1.5 mm, which is suitable for most vehicles..
Check Stock

HENYEE GT45 T4 Turbo 4 Bolt V-Band 1.05 A/R 98mm 600+HPs Huge Boost Upgrade Turbocharger External Wastegate for 3.0L-6.0L Engine Turbo Charger Racing & Gaskets Black Finish

  • APPLICATION: Perfect for all 3.0L-6.0L engine, fit for Fit for Mazda CX-9 2007-2012 3.7L engine.
  • HORSE POWER: Boost Horse Power up to 600+ BHP.
  • Exhaust (Turbo Manifold) Flange: T4 4 Bolt Flange.
  • Exhaust (Downpipe) Flange: V-Band Flange.
  • Reliable Quality: Every turbocharger is individually tested and computer balanced to ensure reliability and consistency.
  • Accessories: You will get exactly as shown in the picture above.
Check Stock

BLACKHORSE-RACING Turbo Charger Oil Drain Return Line Oil Feed Complete Kit T3 T4 T04E T60 T61 T70 Silver

  • Will work with T3 T3 T04E T61 T601 T70 turbo.
  • Comes with 17" braided oil drain return line (comes with AN10(-10AN) fittings for return line kit,oil line covered with high quality woven Stainless steel for racing and aggressive look.).
  • Circulate oil to the oil pan (only for metal plates).
  • It helps to circulate oil from the turbocharger to the oil sump. The kit provides an anodized appearance that provides optimum cooling performance on a turbocharger for long life.And special designed inlet adapter limits oil flow ,effectively prevent blown oil seal caused by excessive oil pressure.
  • Comes with gasket,screws/washer,all fitting are made of high quality aluminum.No Instruction Included, Professional Installation is Recommended!.
Check Stock

Rubber Diverter to Fill a Rain Barrel from Your downspout (Diverter Only, 2x3)

  • Drill a 2 1/8″ hole – do not cut your downpipe – of the 3″ side of the downspipe.
  • This unit Can also be inserted into either a 3×4 or 2×3 downpipe.
  • Drill hole and squeeze into place. Then use the 2 provided screws to secure it.
  • If you have deep ridges in your downpipe water WILL leak out.
  • Best used for rain barrels under 100 gallon.
Check Stock

Diesel Power Plus Cummins Oil Engine Mesh Truckers Hat Historic Logo Cap Summer

  • Guaranteed Exact Fit for easy installation. CARB-approved and 50 state legal!.
  • Professionally remanufactured in the USA, guaranteed to function just like new and backed by a one year, unlimited mileage warranty.
  • This kit includes a remanufactured OEM Holset HE351VE variable-geometry turbocharger with pre-calibrated actuator, new gasket set and new oil feed line.
  • You might find cheaper turbochargers, but please compare carefully - make sure you know what you are getting. Do not settle for low quality parts. Do you really want to risk doing this job repeatedly?.
  • Fits all 2007-2012 Dodge Ram Cummins 6.7L Diesel.
Check Stock

Wind Deflector HandShield Handguard Handlebar Brush Bar Shroud Windshield Windscreen For 1290 Super ADVENTURE R/S/T 2017-2020

  • for 2014 Sprinter 3500 Base Extended Freight Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 3500 Base Standard Van 3-Door 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2014 Sprinter 3500 Basic Standard Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 3500 Base Cab & Suspension 2-Tuerer 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2014 Sprinter 3500 Base Cab & Chassis 2-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 3500 Base Extended Van 3-Door 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2014 Sprinter 2500 Base Standard Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 2500 Basic Standard Passenger Van 3-Tuerer 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2014 Sprinter 2500 Basic Standard Passenger 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 2500 Base Extended Freight Van 3-Tuerer 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2014 Sprinter 2500 Base Extended Freight Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2014 Sprinter 2500 Basic Standard Van 3-Door 2.1L 2143CC 131Cu. . L4 DOHC turbocharger.
  • for 2013 Sprinter 2500 Base Standard Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
  • for 2013 Sprinter 2500 Base Standard Passenger Van 3-Door 3.0L 2987CC V6 DOHC Turbocharged.
Check Stock

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

  • 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
  • 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
  • With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
  • Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
  • Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock

PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit Compatible with Ford 1999-2003 7.3L 679-005 F-250 F-350 Super Duty

  • PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit  ---Replace the factory exhaust feed system (exhaust manifold to the turbocharger)....
  • Turbocharger Up Pipe Kit Works fit for Ford 7.3L powerstroke turbo V8 diesel models only! Such as: 1999 2000 2001 2002 2003( for Ford )F-250 Super....
  • Function - Direct replacement, Turbocharger Up Pipe Kit replaces the vehicle's factory installed exhaust manifold,Rust-resistant for long-lasting....
  • OE#:  679-005,F4TZ6K854C, F4TZ6K854F, F81Z6K854EA, F81Z6K854FA, F81Z6N632AA, F8TZ6K854AA.
  • include - 1 x Set of Turbo Diesel Exhaust Up Pipe All....
  • IMPORTANT NOTE - This Turbocharger Up Pipe Kit is designed to replace an original Turbocharger Up Pipe Kit with these exact options. If you do not....
Check Stock

Turbo - NEW Stock Replacement - 6.0L Powerstroke 2005.5-2007 - Garrett GT3782VA

  • The Garrett 743250-5025S GT3782VA Stock Replacement Turbocharger offers a superior replacement option for your 2005.5-2007 Ford 6.0L Powerstroke. This turbocharger is 100% new and is not rebuilt or remanfactured like the Ford sourced units from your local dealer. A new Garrett turbocharger is a superior product versus independently remanufactured units..
  • Garretts compressor wheel testing dictates 1 million cycles prior to introduction. This testing prevents issues such as low cycle fatigue (hub burst/ wheel splitting in half). A wheel may exceed life expectancy but is at risk for premature failure if reused. Analysis of failed rebuilt units show micro cracks in compressor wheel bores..
  • The Solenoid Control Valve utilizes stricter control parameters to regulate oil flow through the unit. These controls minimize the amount of oil direct to the turbine end seal to reduce turbine seal leakage..
  • The multiple cycles of the 6.0L application can cause high cycle fatigue of the turbine blades. When a 6.0L turbocharger is reworked it is unknown how many cycles are on the turbocharger which can lead to premature failure. Extended cycles can cause tip failures which can be mistaken for foreign object damage..
Check Stock