Categories

Best Turn Signal Switches

Rostra 250-3032 Cruise Control Switch and Lever Assembly

  • This is only the cruise control switch, and requires the cruise control unit (sold separately) to be a complete kit.
  • Designed to replace the existing turn signal lever in the vehicle (not to be installed on a turn signal lever that has been cut off).
  • Works best with a Rostra cruise control kit, but can work with other universal cruise control systems.
  • Rostra universal cruise control kits do not come with a control switch, due to the different designs of vehicles. Thus control switches like this one.
  • select the switch that works and looks best for your vehicle and your tastes.
  • Installation difficulty level is moderate.
  • generally best done by a pro but a skilled DIY can do it.
Check Stock

ACDelco F3914 Professional Starter Solenoid

  • Work with vehicle electronics to help optimize vehicle capabilities.
  • Array of switches, including: door lock, turn signal, ignition, trunk, and windshield wiper switches for most vehicles on the road today.
  • Professional, premium aftermarket replacement.
  • Manufactured to meet expectations for fit, form, and function to provide the performance and dependability you expect from ACDelco.
  • VEHICLE FITMENT:2001 Ford Ranger V6,1983 Lincoln Town Car,1982 Mercury Cougar 2.3L 3.8L, 1982 Mercury Zephyr 2.3L, 1982 Mercury Cougar,Zephyr 3.3L, 1982 Mercury Cougar,Marquis,Zephyr, 1982 Mercury Marquis.
Check Stock

Universal Laser Rocker Switch Backlit LED SASQUATCH for Car Truck Boat ATV UTV 12V Bright Light Powersports (Orange)

  • Manual-return(latching action)ON-OFF button, can be use Compatible For general lights, hazard light, fog light, head light and power outlet Compatible For mobile devices.
  • Self-return(momentary action) button, can be use as horn, turn signal, enginee power, start kill switches..
  • Waterproof design, suitable Compatible For rainy day.
Check Stock

X AUTOHAUX Turn Signal Switch Windshield Wiper Multifunction Combination Switch Y85Z13K359CA for Ford F-250 1997-1999

  • [OE Number] Y85Z13K359CA, Y85Z-13K359-CA, F65Z13K359AA, F75Z13K359BA, F85Z13K359CA, Y85Z13K359AA, YL3Z13K359CA, TSS21, SW5579.
  • [Application] Fitment:for Ford F-250 1997-1999,for Ford F-150 1997-1999,for Ford F-250 HD 1997,for Ford F-350 Super Duty 1999-2001,for Ford F-250 Super Duty 1999-2001,for Ford F-350 1997.
  • [Easy to Install] This multifunction switch is manufactured to the OE specification to provide factory fresh appearance and direct fit..
  • [Function] This turn signal switch is a direct replacement and also controls the High and Low Beam Lights, Hazard Lights, Turn Signal Lights, Wipers Switches.
  • [Durable] The turn light switch has went through rigorous testing so that you will get a fairly reliable switch to give you full control of various vehicle systems..
Check Stock

HeliBars HR01139 Handlebar Riser

  • READY TO GO: Our bars are Pre-wired with your control harnesses extensions, allowing you to use our “Prewired” bars with your existing switches and turn signals. Our bars come with the control and turn signal extensions Pre-Wired along with self-solder/heat shrink connectors. You simply cut your control and turn signal wires, strip a small portion of each, place them into our pre-soldered/heat shrink connectors and shrink them..
  • MODEL COMPATIBILITY: 2011 & Newer Sportster and Softail models (Dyna, Street Bob, Low Rider/ S, Heritage, Deluxe, Slim & Fat Bob). Compatible with Harley-Davidson Sportster (2014-2021), Dyna (2012-2017) and Softail models  (2011-2021 , Street Bob, Low Rider/ S, Heritage, Deluxe, Slim & Fat Bob).
  • 100% Made in the USA - Laser cut, CNC mandrel bent (no fat spotting), fully TIG welded, beveled & de-burred for easy internal wire pulling, and polished to show quality finish. Pre-Wired for quick and easy installation. All of our bars are carefully designed to provide natural, relaxed grip angles combined with optimal pullback comfort. We have engineered them to be direct bolt-on replacements for stock equipment. No slag inside the bar tubes makes installation easy..
  • DOMINATOR INDUSTRIES, A NAME YOU CAN TRUST: We proudly produce....
Check Stock

Signaworks LED 3 Light Steady Andon Tower Light Kit - Parts Only, Assembly Required - 2 Position Switches for On/Off - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 2 position switches to turn each light Off or On Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Three 2 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of da....
Check Stock

Signaworks LED 5 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts to Build a Highly Visible, Red/Amber/Green/Blue/White LED Andon Tower Light with five 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Five 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case o....
Check Stock

Signaworks LED 3 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This is a Kit of all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, three 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in cas....
Check Stock

Signaworks LED 4 Light Steady & Flashing Andon Tower Light Kit - Parts Only Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green/Blue LED Andon Tower Light with four 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Four 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable....
Check Stock

TSL1401CL Linear Sensor 128X1 Linear CCD Camera Sensor Ultra Wide Angle Lens 120 Degree Black and White Line Tracking Module

  • BASIC SPECIFICATIONS: With sensitivity pure tones , field cut and signal output, circuit board output switch (can be directly passed through the microcontroller).
  • MULTIPLE OUTPUTS: The linear magnetic sensor switches has signal output indication, single signal output, active low signal output.
  • IDEAL CHOICE: This linear magnetic sensor switches is ideal for temperature control, proximity switches, alarm detection or rotate encoders.
  • WITH SENSITIVITY: Universal sensor module with potentiometer to adjust the sensitivity of the sensor, provides analog and digital output.
  • HIGH COMPATIBILITY: With A3141 chipset, 49E linear effect sensor, LM393 dual differential comparator, potentiometer, 2 LED and 6 resistors, fully compatible with standard microcontrollers.
Check Stock

UCTRONICS PoE hat for Raspberry pi

  • For Pi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Intelligent Temperature Control: the 25mm×25mm brushless cooling fan will turn automatically when the temperature of the processor is high..
  • Smaller Size: Save more space than the official HAT, can be held in the most case for Raspberry Pi.We recently released a new version of PoE HAT with fan, which can support 48V non-standard switches, please search B09MCGFX12.
  • NOTE: The network switch or power sourcing equipment (PSE) is needed to supply the PoE signal, and they must be compliant with the IEEE 802.3af or 802.3at PoE standard, particularly section 33.4.1 with regards to PSE electrical isolation of the leads. For the non-isolated switch, such as some Ubiquiti switches can not provide proper isolation, they can only work with CAT 5E and CAT 6E network cable..
Check Stock

PBYMT 1157 LED Turn Signal Light,Front Rear Running Brake Light, 2\ Smoke Lens Cover, Compatible for Harley Davidson Sportster Softail Touring Electra Street Glide Road King 1997-2022

  • ▶FITMENT - Aftermarket front rear turn signal light kit compatible for Harley 1986-2020 models which with 2 inches standard bullet style turn signal lights and 1157 socket.*Does NOT fit 3-1/4” flat style turn signals or 1156 socket.Plug and play on most models.The turn signals may flash faster than normal on 2010-older Softails,2011-older Dynas,2013-older Sporsters,and 2013-older Touring and Tri-Glide models. If a slower flash rate is desired,the load resistor is required..
  • ▶NEW DESIGN LED TURN SIGNAL LIGHT - The LED turn signals feature raw LEDs without lenses giving the benefit of more light output. Each 1157 bulb is brighter 150% than traditional halogen bulb,you can switch turn signal and running light anytime.The front turn signal bulbs are switchback model, outer white ring for running light and center amber for front turn signal.
  • the red rear turn signal bulbs integrated tail light with brake light and turn signals function..
  • ▶VARIOUS APPLICATION - The front turn signal bulbs are switchback model, outer white ring for running light and center amber for front turn signal.
  • ▶SMOKE LENS COVERS - Made of high quality PC plastic,mounted on the turn....
Check Stock

ALTBET Universal ATV UTV SXS Turn Signal Horn Kit Street Legal Kit Handlebar Thumb Switch with Lights Flasher Relay (Kit M)

  • Universal Street Legal Kit: This is a set of universal turn signal DIY kit for motorcycles. it is suitable for your UTV, ATV, SXS, dirt bike, 4x4 project, golf cart etc..
  • Multi-Function motorcycle light switch, have turn signals, headlight, horn switch function, convenient to use, strong waterproof.
  • The diameter of handlebar switch is 7/8”.
  • Note before Purchasing: Wires are not included due to the different lengths required. Installation instructions are not included, only with wiring diagram for switches, professional installation is strongly recommended..
  • Package Included: 1x Handlebar combination turn & horn switch.
  • 2x Clear/white LED lights (for interior indicators or dome light or foot-well light).
Check Stock