Categories

Best Turning Bearing

ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS

  • ...ring extractor collets with internal capacity from 3/8"/10mm to 1-1/4"/32mm, bearing extractor 3/8"/10mm to 1/2"/14mm, 9/16"/15mm to 11/16"/19mm. 5/8"/18mm to 1"/25mm, 1"/25mm to 1-1/4"/32mm..
  • Great Function: Open clamps by turning handle clockwise to snug against the bearing, the blind bearing puller is great for pulling out evenly without damage the parts..
  • Wide Application: This pilot bearing removal tool blind hole bearing puller is ideal for pulling jobs,against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use..
  • Storage Case: The slide hammer bearing puller is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..
Check Stock

DASBET 3 Jaw Pilot Bearing Puller, Heavy Duty Pullers Set Bushing Gear Extractor Wheel Bearing Puller Automotive Machine Tool Kit for Car SUV

  • 3 Jaw Gear Puller: Used to removes pilot bearings, pump bearings, brushings.Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside..
  • Premium Quality: 3 Jaw Extractor is corrosion-Resistant Black Oxide Finish. Forged and Heat Treated Steel Jaws.Drive screw is covered by phosphating, which provides maximum strength and longevity to the gear puller..
  • Bearing Range: Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force..
  • Wide Application: Puller Set is ideal for: Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Package Included: 1 x 3 Jaw Pilot Bearing Puller.
Check Stock

KUNTEC 5pcs Blind Inner Bearing Puller Hole Pilot Bearing Gear Puller Slide Hammer Puller Set

  • Blind bearing puller is used to pull out evenly without damage the parts..
  • Bearing extractor collets with internal capacity from 3/8" (10mm) to 1-1/4" (32mm).
  • Easy to Use: Open the collets (clamps) by turning the T-handle clockwise until it fits snugly against the bearing, and then pull out evenly.
  • Bearing puller is made of chromed carbon steel for durability, overall length 15" (382mm). Bearing Extractor Size: 1: 3/8" to 1/2" (10mm-14mm).
  • Customer Service: If there is any other questions on this product, please contact us, we will reply in 24hours..
Check Stock

ATPEAM 3 Jaw Inner Bearing Puller, Jaw Pilot Bearing Puller Auto Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV

  • 3-Jaw Puller Set: Ideal for Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc.
  • Premium Material: The 3-Jaw Bearing Extractor Puller is made of strong carbon steel with black Oxide finishing, high hardness, corrosion-resistant forged and heat treated steel jaws, can serve for long time.
  • Strong Puller Power: Structure design, gently turning the small wrench can produce a strong pull force.Removes all sleeve-type bearings with 1/2-2inside diameter..
  • Stable & Safe: The Blind Bearing Puller applies even pressure to preventing damage to bearings, also ensures stability during use.
  • Package Included: 1x 3-Jaw Inner Bearing Puller Tool. Size: 200x135mm. Wire rod length: 175mm. Bar length: 125mm. Arm length: 86mm..
Check Stock

Outboard Trim/Tilt Pin Wrench Tools Set - MT0004 & MT0006 & MT0009 Fit for Yamaha Suzuki Johnson Evinrude

  • Application -- Compatible with Mercruiser Alpha Alpha 1 MR Bravo OMC Cobra Volvo. With this tools set, you could replace gimbal bearings and hinge pins..
  • Gimbal Bearing Puller -- This bearing puller remover can easily remove the gimbal bearings on bell housings by turning the end of the tool with a wrench..
  • Gimbal Bearing Installer -- Used to install the new gimbal bearing back, set the bearing on the installer than insert the installer in engine. Also it can be used to check engine coupler alignment with the gimbal bearing and drive..
  • Hinge Pin Tool -- This tool is used to remove and install hinge pins for Mercruiser drive units. It can separate the housing from the gimbal ring on the hinge pin bolt..
  • High Quality -- Our tool set is made of premium solid steel with nice black Oxide finish which is anti-corrosion and rustproof. The tools are specially hardened for added strength and impact protect. So the product can be durable and service a much longer time..
Check Stock

TaiGen Taigen Hobby (Metal Edition) 2.4Ghz 1/16 German Leopard 2A6 Airsoft Battle Tank RTR (Camouflage)

  • Taigen Metal Edition German Leopard 2A6 Tank.
  • Hobby acrylic painted job, Strengthened metal chassis, Hobby Black Steel Gearset (High/Low, 4:1, 58mm with bearing).
  • Metal turret + metal gun barrel with metal gun head,metal track,metal drive wheel and idle wheel ,Hobby Black Steel Gearset (4 in 1 steel gear with bearing),metal suspension,metal photo etch,metal pull rope,strength part for tank chassis,metal part for view,metal armor,metal turrent cover,shoulder wheel with bearing,metal tank chassis,metal part for view,metal front & rear hook,metal machine gun light, metal front forward light.
  • With hobby Plastic upper hull . Turret with 360 turning.
Check Stock

CuberSpeed Moyu Skewb stickerless Magic Cube Cubing Classroom Mofang Jiaoshi Meilong Skewb stickerless Speed Cube

  • The MoFang JiaoShi Meilong Skewb is a new MoYu sub-branded skewb in the Cubing Classroom series. The Cubing Classroom series offers many premium design features at a low price point, and it is most ideal for beginning cubers..
  • MoYu Cubing Classroom Meilong Skewb is a speed cube with challenging. We optimized the structure by using anti-pop feet and putting the steel ball on the feet to provides a smooth contact surface which eliminates the bumpy feel turning the cube. It's really comfort turning the cube, especially fits beginners..
  • Using Ball bearing mechanism that won't position improperly. The special design enables the cube to have positioning system and light turning feel at same time..
  • Anti-pop feet can fit the corners and edges tightly, which puts the pop problem to an end.
  • We applied lots of holes at where may collide to reduce as much bumpy feel as possible on accordance of high stability so that the hand feel will be more comfortable..
Check Stock

Double Bearing Live Revolving Centers For Lathe Machine- Engineering Tools (2MT- M12 X 1)

  • Quality Precision Double Bearing Live Revolving Centers-Made from Quality Tools Steel.
  • Comes in 2MT with M12 x 1 mounting threads to mount the chuck or drill chuck for long work piece support while turning on the lathe.
  • Chose as per your Lathe machine tailstock 's taper . Perfect for both Wood turning & metal working.
  • Shanks are hardened & precisely ground . The mounting thread spigot has been machined to hold through a spanner to hold it from revolving and tightening the chuck on it..
  • Concentric run out within 10 microns. Recommended for Conventional Lathe Machines Only.
Check Stock

5

  • HIGH QUALITY DUAL LOCKING- Made of non-marking polyurethane rubber, these caster wheels are very quiet while rolling, and absorb shock and vibrations. Ball bearing and dual locking bring a max loading capacity and safety..
  • MAX FLEXIBILITY AND SAFETY- Swivel casters rotate 360 degrees which makes turning the mating equipment possible. Its good for transporting furnitures and displays quietly and safely..
  • HEAVY DUTY BEARINGS- Steel structures body is extremely hard wearing and resistant to dirt, 1400 lbs capacity for the pack of 4, Bearing Heavy Duty..
  • UNIVERSAL USE- The wheels can be used for a multitude of applications Including: Flight Cases, Instrument Cases, Display / Exhibition Equipment, Dollies, Tool Boxes, Light Machinery, Equipment Stands, Mobile Workstations, Speakers, Cabinets, Stands, Amps, Electrical Enclosures, Furniture etc..
  • 100% LIFETIME GUARANTEE- If you are not satisfied, extremely quiet and the smoothest rolling wheels you have ever used, we'll give you a 100% refund within 90 days of purchase..
Check Stock

netuera MT2 Live Center Morse Taper with 60 Degree Point, 1MT Triple Bearing Lathe Medium Duty Live Tailstock Center for High Speed Turning CNC Work, A9F7-9944

  • Used for holding a workpiece with a hole from 1/8" to 1- 1/8" diameter.
  • 60 degree point and ball bearing precision.
  • Well balanced and smooth for effective turning.
Check Stock

TECHTONGDA Inch Thread Metal Lathe 7X12\ Precision Bench Lathe 600W Brushless Motor Turning Machine

  • [Professional Lathe]: Techtongda lathe is used for turning, facing, drilling, boring and turning thread. Also can be used for precision parts processing, sample processing and model processing. With extensive use, simple operation and extensive processing..
  • [600W Brushless Motor]: The newly upgraded 600W brushless motor not only gives more power but also saves you the trouble of replacing the brush..
  • [All Metal]: All the gears are made of metal and the spindle is supported by precision taper roller bearing. High quality materials make its service life longer..
  • [Safety First]: The lathe is equipped with emergency stop switch and overload protection device, which can better protect the operator in emergency..
  • [Infinitely Variable Speed]: This lathe allows both forward and reverse, with the spindle speed can be adjusted in the range of 50-2500rpm which give you the convenience to process the workpiece at will..
Check Stock

Stanley Proto J9979-NA Proto Carpenter's Box

  • HIGH QUALITY DUAL LOCKING- Made of non-marking polyurethane rubber, these caster wheels are very quiet while rolling, and absorb shock and vibrations. Ball bearing and dual locking bring a max loading capacity and safety..
  • MAX FLEXIBILITY AND SAFETY- Swivel casters rotate 360 degrees which makes turning the mating equipment possible. It’s good for transporting light furniture and displays quietly and safely..
  • HEAVY DUTY BEARINGS- Steel structures body is extremely hard wearing and resistant to dirt, 1200 lbs capacity for the pack of 4, Bearing Heavy Duty..
  • UNIVERSAL USE- The wheels can be used for a multitude of applications Including: Flight Cases, Instrument Cases, Display / Exhibition Equipment, Dollies, Tool Boxes, Light Machinery, Equipment Stands, Mobile Workstations, Speakers, Cabinets, Stands, Amps, Electrical Enclosures, Furniture etc..
  • 100% LIFETIME GUARANTEE- If you are not satisfied, extremely quiet and the smoothest rolling wheels you have ever used, we’ll give you a 100% refund within 90 days of purchase..
Check Stock

POWERTEC BF800 Heavy Duty Slow Speed and Long Shift Bench Buffer

  • INCLUDES: 8” Bench Buffer Polisher with heavy duty, wobble free profile with two 8” buffing wheels included.
  • FUNCTION: Specifically designed for polishing surfaces of woods, metals, stones, hard plastics, lathe tools, jewelry and more. Ideal for maintaining super sharp edges on blades or creating professional looking buffed finishes on wood turning chisels.
  • FEATURES: Long, ball bearing supported shafts that allow wider pieces to be buffed, a convenient on/off switch with safety key to prevent unauthorized use, and a 1750 RPMs to help prevent the overheating of finishes.
  • ADDITIONAL SPECS: Universal 8 inch buffing wheel mounting, 5/8” arbor, 1/2 HP slow speed induction motor with 2.5 amps.
Check Stock