Categories

Best Turning Lathe

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

RIKON Power Tools 70-105 10\ x 18\ 1/2 hp Mini Lathe

  • Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change..
  • Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum..
  • 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing..
  • Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches..
Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

  • 【PRODUCTS INCLUDE】 - Lathe tools including(1)10.7"handle (2) 7.9"wood turning tools including square,round,diamond,square arcs(3)easy to replace the head of the T15 wrench,all parts are made of special hard sponge full fitted wrap,in the box..
  • 【5 SECONDS QUICK DISASSEMBLY】 - No tools required,simply loosen the knurled chuck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
  • 【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame c....
Check Stock

Grizzly Industrial G0842-14" x 37" Wood Lathe with Copy Attachment

  • Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change..
  • Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum..
  • 5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing..
  • Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches..
Check Stock

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Simple Woodturning Tools Carbide Lathe Turning Tool Set of 3 Full Size with 17 Foam Grip Handles USA Made

  • American Made Set of 3 Full Size Carbide Lathe Turning Tools with Color Coded Handles: Hollower, Detailer & Rougher.
  • 17" long solid aluminum foam grip tool handles are color coded for easy tool identification. Overall tool & handle length is 26.5"..
  • This set of carbide lathe tools is ideal for turners at any skill level. With carbide it's all turning and no sharpening so you can begin turning....
  • Each lathe tool is 1/2" square CNC machined by Harrison Specialties in Ramsey, Minnesota. These tools are designed to be kept flat on the tool rest....
  • Each lathe tool features a carbide tip with multiple sharp edges that can be rotated several times. A Torx star wrench is included..
Check Stock

WenCrew Carbide Tipped Wood Turning Tools Set, 2023 Upgrade Carbide Lathe Tools for Woodturning, Lathe Rougher Finisher Swan Neck Hollowing Tools with Extendable Shafts & Full Size Cutters Inserts

  • ... ” can offer better strength and durability to helps maintain edge persistence, to avoid constant sharpening..
  • ▶▶▶ HIGH STABILITY: High performance stainless steel arbor and aluminum oxide handles increase stability and shock resistance. Better shock resistant wood turning tools will ensure the handle will not loosen when vibrating, which will make you get a good cutting effect in safe operation(Heavy duty wood turning tools for lathe are less likely to roll and move on the tool holder than wood tools).
  • ▶▶▶ SIMPLE OPERATEION : Carbide wood turning tools allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools. And our wood lathe tools bring you outstanding results, Ideal for lathe woodworking or DIY enthusiasts.
  • ▶▶▶ FAST HANDLE SWITCHING: Excellent reliable ergonomics grip makes you feel comfortable and light. Adjustable and Extendable handle support freely adjust the length according to your preference. Wood turning tools equipped with tools to adjust and extend the length, easy and flexible to assemble and disassemble....
Check Stock

ASZLBYM 3/8\ Lathe Threading Turning Tool Holder SER1010H11 with Indexable Carbide Threading Turning Insert 11ER A60 (3/8\ Holder + 11ER A60 Insert)

  • PACKAGE INCLUDES : You will receive 1 pieces SER1010H11 3/8”/10mm shank diameter lathe turning tool holder , 11pcs 11ER A60 threading carbide turning inserts and 1pc T8 wrench..
  • Material : The SER1010H11 3/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 3/8"*3/8"(10mm*10mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 1.5mm..
  • Easy to store: the metal lathe cutting turning tool holder and threading carbide turning inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

8MILELAKE MT2 Wood Lathe Live Center Set, 4pcs Drive Spur Cup Kit Arbor Woodworking

  • 4pcs MT2 shank Drive Spur Cup live center for woodworking lathe.
  • This MT#2 Lathe Center Set is all you need to start spindle turning on your wood lathe..
  • Made from high quality steel, sturdy and durable..
  • Perfect for both Wood and Metalworking Lathe..
  • The set includes: 1pc 1/8" dia. spur driver, 1pc 5/8" dia. spur center, 1pc 5/8" dia. cupped dead center 1pc liver center for smooth friction free turning.
  • 4pcs white plastic little case for easy storage for each parts.
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Savannah - 7586 Carbide Turning Tool Large Size (3 Piece Set - All 3 Turning Tools) Includes Diamond Shape, Round and Square Turning Tools With Comfort Grip Handles, Three Tool Set

  • ●PACKAGE : you will receive 3 pieces 5/8 inch lathe indexable carbide turning tool holders, 1 piece MTJNR1616H16, 1 piece MWLNR1616H08, 1 piece MWLNR1616H08, 11 pieces CNMG 431,11 pieces WNMG 431, 11 pieces TNMG 331 indexable carbide turning insert blades, cufficient quantity and easy to replace..
  • ●MATERIAL : lathe indexable carbide turning tool holders are made of quality 40Cr steel.
  • The 40Cr steel material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use TIN coating, the blade has high hardness, low friction coefficient, nice wear resistance and chemical stability..
  • ●SIZE : diameter of the holder is (5/8 x 5/8 inches/ 16 x 16 mm).
  • Overall length is 3-7/8 inch/ 100 mm, cutting direction is right hand.
  • each tool holder has a black oxidized smooth surface..
  • ●EASY TO STORE : 33pieces indexable carbide turning inserts into 3 plastic boxes , each turning tool holder is placed in a plastic box, and Each box has a clear mark for easy identification of the product model, safe and easy to store..
  • ●MAYBE YOU NEED : If you need 5/8" left hand turning holder set, you can search for ASIN : B07B8XNH98 to buy it..
Check Stock

HFS (R) Woodworking MT2 with 1-Inch Wood Lathe Drive Center

  • [Wide application]: Perfect for both wood and metal working Lathe. This turning tool is used on lathe with a lathe bored tailstock, will provide smooth wood turning support..
  • [Spring Loaded Point]: The spring under the center pin is very powerful..
  • [Specifications]: Compatible with headstocks with #2MT spindles.
  • [Advantages]: More teeth give a better bite while providing equal pressure and a positive drive..
  • [Material]: Made from high quality alloy steel, sturdy and durable..
Check Stock

5/8\ 2PCS CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1616H16 + SEL1616H16 with 2PCS 16ER/IR AG60 BP010 Indexable Carbide Turning Insert Blade

  • PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
  • Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
  • If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..
Check Stock