Categories

Best Turning Point

Mini Carbide Tipped Wood Lathe Turning tools Combo set Rougher Detailer Finisher with Wood Handle and Diamond Round Square Carbide Inserts，3pcs

  • Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square11 ×11× 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point).
  • Handle：wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability.
  • Package: Set of 3, Plastic case packaging.
Check Stock

3pcs Mini Carbide Tipped Wood Lathe Turning tools Combo set Rougher Detailer Finisher with Wood Handle and Diamond Round Square Carbide Inserts

  • Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square14×14 × 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point).
  • Handle：wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability.
  • Package: Set of 3, Plastic case packaging.
Check Stock

Tama Dyna-Sync Twin Pedal

  • Optimized Transmission Design: By precisely positioning and aligning the contact point transmission angles between the cam, direct link, and footboard, you achieve the perfect overall balance of power-speed-feel.
  • Slidable Cam: Upper cam section slides back and forth in a 'non-stop' action to adjust the cam-turning radius. A larger turning radius provides for a more linear motion between footboard and beater and results in a high degree of sensitivity for nuanced performance.
  • Dyna-Sync Footboard Angle Design: Integrates into the clam-shaped connection point between linkage and footboard and is fully adjustable to deliver a totally personalized pedal angle adjustment.
  • Dyna Beater: Featuring black felt and a slightly tapered shape, this traditional style beater provides impact to the bass drum head surface evenly to maximize clear, dynamic articulation.
  • Sync-Loop: Sync-Loop is a 1.5x heavier gauge steel spring compared to our established Cobra loop. The Sync-loop assists the return of the footboard to the original position to provide an extra element of quickness to the pedal and slides on the bass plate so drummers can customize their own level of pedal return assistance.
Check Stock

Williams MSB-20HRC 20-Piece 3/8-Inch Drive Metric Shallow 6 Point Socket Set

  • Designed for quick engagement on 6 point fasteners.
  • Sockets feature super torque lobular openings for greater turning power without deforming the fastener.
  • 6 point, metric and has a high polished chrome finish.
Check Stock

HFS (R) Woodworking MT2 with 1-Inch Wood Lathe Drive Center

  • [Wide application]: Perfect for both wood and metal working Lathe. This turning tool is used on lathe with a lathe bored tailstock, will provide smooth wood turning support..
  • [Spring Loaded Point]: The spring under the center pin is very powerful..
  • [Specifications]: Compatible with headstocks with #2MT spindles.
  • [Advantages]: More teeth give a better bite while providing equal pressure and a positive drive..
  • [Material]: Made from high quality alloy steel, sturdy and durable..
Check Stock

CuberSpeed Moyu Skewb stickerless Magic Cube Cubing Classroom Mofang Jiaoshi Meilong Skewb stickerless Speed Cube

  • The MoFang JiaoShi Meilong Skewb is a new MoYu sub-branded skewb in the Cubing Classroom series. The Cubing Classroom series offers many premium design features at a low price point, and it is most ideal for beginning cubers..
  • MoYu Cubing Classroom Meilong Skewb is a speed cube with challenging. We optimized the structure by using anti-pop feet and putting the steel ball on the feet to provides a smooth contact surface which eliminates the bumpy feel turning the cube. It's really comfort turning the cube, especially fits beginners..
  • Using Ball bearing mechanism that won't position improperly. The special design enables the cube to have positioning system and light turning feel at same time..
  • Anti-pop feet can fit the corners and edges tightly, which puts the pop problem to an end.
  • We applied lots of holes at where may collide to reduce as much bumpy feel as possible on accordance of high stability so that the hand feel will be more comfortable..
Check Stock

Starrett Automatic Center Punch with Adjustable Stroke - 125mm Length 14mm Diameter Tapered Point û 18A

  • Makes Drilling Hole Easy - The 18A Automatic Center Punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping..
  • Steel Construction - This Center Punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow..
  • No Hammer Needed - This punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work..
  • Adjustable Force - For a heavy mark, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting..
  • Removable Point - The point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools..
Check Stock

Starrett Automatic Center Punch with Hardened Steel Metal - 100mm Length, 11mm Punch Diameter Tapered Point - 18AA

  • Makes Drilling Hole Easy - The 18AA Automatic Center Punch is a tool with a conical point, which is used making an indentation in an object This allows you to safely drill a hole at the same spot without slipping..
  • Steel Construction - This Center Punch is made of hardened steel and has a knurled finger grip for ease of handling and greater punching control Its tempered head makes it less likely to fracture from a hard, off-center blow..
  • No Hammer Needed - This punch has a mechanism that automatically strikes a blow when downward pressure is applied No hammer is required, making one hand always free to steady the work..
  • Adjustable Force - For a heavy mark, the cap is screwed down. Progressively lighter marks are obtained by turning the cap upward Marks made by the point are uniform in depth and size for each setting..
  • Removable Point - The point can be easily removed for regrinding and/or replacement Always wear safety goggles when using striking tools..
Check Stock

netuera MT2 Live Center Morse Taper with 60 Degree Point, 1MT Triple Bearing Lathe Medium Duty Live Tailstock Center for High Speed Turning CNC Work, A9F7-9944

  • Used for holding a workpiece with a hole from 1/8" to 1- 1/8" diameter.
  • 60 degree point and ball bearing precision.
  • Well balanced and smooth for effective turning.
Check Stock

MT2 Live Center Wood Lathe Drive Spur Cup 4pcs Set with 2Pcs Extra Replacement Tips with Good Quality Wooden Box

  • 4pcs MT2 shank Drive Spur Cup live center.
  • The set includes: 1pc 1/8" dia. spur driver, 1pc 5/8" dia. spur center, 1pc 5/8" dia. cupped dead center 1pc liver center for smooth friction free turning.
  • 2pcs spare point(tips), Total with 4pcs point(tips).
Check Stock

MT1 Wood Lathe Live Center Drive Spur Cup 4pcs Set with 2Pcs Extra Replacement Tips with Good Quality Wooden Box

  • 4pcs MT1 shank Drive Spur Cup live center for woodworking lathe.
  • This MT#1 Lathe Center Set is all you need to start spindle turning on your wood lathe.
  • The set includes: 1pc spur driver, Center Is 2-3/4" Long x 0.66" Dia. 1pc spur center, Center Is 2-3/4" Long x 1-1/16" Dia. 1pc cupped dead....
  • 2pcs spare point(tips), Total with 4pcs point(tips).
Check Stock

RETRO CANDY YUM ~ 1982 41st Birthday Nostalgic Candy Gift Basket Box 80s Assortment from Childhood for 41 Year Old Woman or Man Born 1982 JR

  • 1982 BIRTHDAY GIFTS FOR MEN, BOX FILLED WITH CHILDHOOD CANDY: A fun selection of 41st birthday candy from the 80s decade that will instantly transport the birthday person back in time. Our fun 1982 candy gift box is the perfect alternative to the ordinary, boring birthday gifts for men turning 41. Forget the neckties, socks, sweaters, or mug and go for a box full of 80s candy from his childhood! It's one of those ideal gifts for 41 year old man that he's sure to love..
  • BLAST TO THE PAST: Our fun 1982 candy gift box is the perfect alternative to the ordinary, boring birthday gifts for men turning 41. Forget the gadgets, socks, sweaters, or mug and go for a box full of 80s candy from his childhood. This is one of those perfect gifts for 41 year old man who would appreciate an upbeat 41st birthday gift basket box of 1980s retro candy for this important celebration. He'll have fun eating the candy he ate as a child, and if you're lucky, maybe he'll share!.
  • 41ST BIRTHDAY GIFTS FOR HER: There are lots of milestones and memories to celebrate when it comes to turning 41 years old. Four decades of life is a big deal, so you want to be sure to honor her in a fitting way and give age appropriate gifts for 41 year old woman. When she opens the 1982 41st birth....
Check Stock

Carbide Tipped Wood Turning Lathe Tools Set, 30' 4Pcs Upgrade Sharp Lathe Rougher Finisher Swan Neck Hollower Tools with Durable Free Combination Alloy Handle Include Round Square Inserts

  • 【High Efficiency Tool】MYKASEN lathe turning tools is developed for experienced or novice woodworkers. It can keep sharp for a long time. When the tool becomes dull, the tool can be replaced in just a few seconds, without the need to sharpen it. It is a high-efficiency tool..
  • 【Value Pack】The carbide turning tools set includes 4 types of tools (rough/detail/finishing/) to meet different grinding needs. Equipped with 1 handle and 1 extension handle at the same time, which can be used alternately. We also thoughtfully prepared a pair of protective gloves to ensure your safety during use..
  • 【Dimension and Material】Matched with 4Size Carbide Cutters Inserts(1pcs Square11 × 11 × 2.0mm-30°, 1pcs Round 12 × 2.5mm-30°, 1pcs Round 8.9 × 1.85mm-30°, 1pcs Diamond 10×30mm with Radius Point), We provide high-quality products, hard alloy blades, stainless steel rods, aluminum alloy handles and shells. Everything in this tool set is dynamic and reliable..
  • 【Interchangeable Grip Handle】We provide two smart and interchangeable handles. They can be used alone or connected together. The length of a single root is 280mm, and the combined length can reach 500mm. Clever design. However, for safety reasons, be sure to tighten the two tool rods before use..
Check Stock