Mini Ball Valve 1inch NPT Female Male Thread 316 Stainless Steel Air Liquid Steam Shut-Off Valve
- MATERIAL: this ball valve is made of 316 stainless stell material for higher corrosion resistance.
- TWO DIRECTIONS: Inline valve for connecting two pipes going in the same direction.
- Double-seal system allows flow to go in either direction.
- WIDE APPLICATION: our steel Ball valves can be widely used in various air, liquid, and steam applications.
- EASY TO OPERATE: Ball valves is designed with On/ Off switch and quarter-turn easy operation for manual control.
- CONNECTION: 1 inch standard connections, which makes mini ball valve suitable for most pipes.
Check Stock
3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)
- Ball Valve：Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
- Good Sealing：KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
- Convenient Operation：KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
- Widely Used：Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
- Suitable for Media：The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Check Stock
Tool Daily Compatible Chemical Injector Set for Pressure Washer, Replacement for Briggs and Stratton 190593GS 190635GS 203640GS
- Pressure Washer Soap Injector Kit, compatible Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please identify the part number of pressure washer pump, then check if it fits your pressure washer..
- How to replace: Follow soap hose to end and you’ll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don’t overtighten, you’ll break the o ring or crack white metal on pump. Put the soap hose back on..
- If the part on your pressure washer part is worn-out, rusted or hard-water-deposit clogged, you can replace it with this set..
- Package List: Two Chemical Injector Sets, including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 4 O-Rings..
Check StockMaxLine RapidAir M8040 1' In Line Ball Valve For 1 Inch Max Line Air Tubing
- This is a Maxline Part Number M8040 - 1" in-line shut off ball valve for Rapidair MaxLine 1" tubing..
- This is a solid brass valve that is nickel plated to resist corrosion..
- This ball valve has a 175 PSI max working pressure and features a double o-ring sealed compression style fittings on each end specifically designed to be used only with the 1" MaxLine air system tubing..
Check Stock
1 Inch Ball Valve, Premium 304 Stainless Steel Full Port Forged NPT Ball Valve for Water Oil and Gas with Long Handle Shut Off Switch, 1000 WOG ( 1 Piece, FNPT to FNPT )
- Quality Materials: Full Port Heavy Duty 1" Ball Valve is made of high quality 304 stainless steel, lead free, Safer and stronger, long lifetime. It is the ideal plug valve for high quality shut- off valves in industry or in the home and garden..
- Suitable for a variety of media: The high-quality stainless steel ball valve is suitable for water, sea water, air, oil, and steam media with a temperature of -10 ℃～120℃.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
- Convenient operation: This high pressure 1 inch ball valve has a comfortable operating handle, which opens and closes quickly. It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
- Good sealing: It has two sealing surfaces with good sealing performance and can achieve complete sealing. When fully open or fully closed, the sealing surface of the ball and the valve seat is isolated from the medium, and the medium will not cause erosion of the valve sealing surface when the medium passes..
Check StockDAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000
- Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
- The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
- This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
- Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
- This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....
Check Stockhomewinner Bonnet Poppet Repair kit fit for FEBCO 765-1 Replacement Part# 905-212 1 & 1-1/4 Backflow Preventer and Vacuum Breaker Part Number 905212 for FEBCO 765 1 & 1 1/4 Vacuum Valve
- Instruction: Please apply the included grease on both threading of the bonnet part and bronze valve. Two pits on the outer ring of the bonnet part are....
- OEM factory replacement part for FEBCO. Two Fit for FEBCO's Model 765 EVB 1" and FVB 1-1/4" vauum pressure breaker valve, vacuum breaker and backflow....
- This it is a replacement part for original Febco part number 905212 FRK 765-BP 1-1 1/4 Bonnet Poppet Assembly. Please confirm your part number #....
- Please note the 1" and 1-1/4" is NOT the outer diameter of the bonnet part! The desription of 1" and 1-1/4" is the orginal FEBCO 765 valve model name.....
- Ready-to-Go kit, Includes bonnet, O-ring, spring, e-ring, washer, stem, rubber disc, poppet and oil bag. Easy to install, Free of Lead..
Check StockSink Soap Dispenser Extension Tube Kit 47' with Check Valve, No Need to Fill The Little Bottle Again!
- MAKE YOUR LIFE EASIER: With 47" sink soap dispenser extension tube kit, use the big bottle directly, no need to refill small bottles anymore..
- HIGH QUALITY: Food-Grade silicone soap tube is soft and elastic, check valve make it easier to pump out the soap..
- EXCELLENT DESIGN: We supply 4 multiple caps to fit most soap and lotion containers. A check valve and pp ball keep soap primed at the top of the tube!.
- EASY TO USE: With the long hose, skipping the messy process of refilling the soap dispenser. The check valve and pp ball will keep soap always primed in your soap dispenser, so you don’t waste time pumping..
- WHAT YOU GET:4 bottle stoppers to fit most soap containers, a check valve connect two tubes, a pp ball and 2 fastening bolts.NO SOAP DISPENSER PUMP INCLUDED..
Check StockMaxline M8203V Dual Outlet Kit 1' Inlet Two 1/2' Ports Line Drop With Ball Valve
- This is a MaxLine M8203V dual outlet port with ball valve..
- Features a 3/8" FNPT Port w/ Ball Valve (Serves as air pressure / moisture drain).
- This port has a 1" inlet that only works with 1" MaxLine tubing..
- It features two 1/2" outlets that come out at an angle to make adding attachments convenient..
- This outlet block also features an inline ball valve to shut off the flow of air to the outlet as well as a twist moisture drain on the bottom to help avoid get excess water build up in your airlines. Dimensions: 3-7/8" Wide x 4-1/2" Tall x 3-1/4" Deep.
Check StockMotorized Ball Valve- Stainless Steel Ball Valve with Full Port 9-24V DC and 2 Wire Reverse Polarity by U.S Solid 1 inch
- RELIABLE AND SAFE- The metal components of this ball valve are made entirely of SS304 and SS316 stainless steel.
- NPT THREADING-1” thread, manufactured and measured according to National Pipe Thread standards.
- This electrical ball valve is full port, meaning the....
- 9V-24V DC- Works effectively over entire voltage range.
- Limit switch cuts off power after valve is fully open....
- 2 WIRE REVERSE POLARITY SETUP- Simple two wire connection, valve completely de-energizes after opening or closing.
- ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
- This reduces likelihood of overheating, making it a....
Check StockDGZZI G1/4 /Ball Valve G1/4' Screw Thread Brass Black Water Cooling Mini Shutoff Valve Water Stop Switch with Red Metal Handle for PC Water Cooling System
- Made of high quality brass material, durable..
- Nickel plating provides a smoother, brighter and finer surface..
- High-flow ball valve structure, safe and reliable..
- Water ball valve with handle, good sealing and precision teeth, used to easily close part of the water channel, for PC water cooling applications..
- Be used as a drain valve to clean the water cooling circuit or add new coolant to control the water flow easily..
Check StockMillenti Futsal Indoor Soccer Ball – Low Bounce Futsal Soccerball Official Size 4, Jinga Blue, SB0704BU
- STAND OUT: The Millenti Futsal Jinga Blue ball has accented color panel graphics. Easy to see High-Viz designs make perfect sense. To help you analyze ball movement through the air..
- VALVE POSITION MARKER: VPM is our accent around the valve, the hardest part on a ball. Aim for our “sweet-spot” strike zone. Kicking this area helps you generate more power taking free-kicks..
- LOW BOUNCE: Our stuffed wound low bounce bladder keeps our Futsal ball low to the ground. Designed for indoor artificial hard fields. Textured PU, thermal fused. Size 4 Futsal (official size).
- AIRLOCK: Butyl low bounce bladder with exceptional air and shape retention during training or match play. Wound bladders ensure Futsal balls have staying power with the best responsiveness..
- FREE STUFF: Ships inflated, game ready in a stylish gift box. Comes with a love it or return it satisfaction guarantee..
Check StockMotorized Ball Valve- 1/4 Stainless Steel Ball Valve with Full Port 9-24V DC and 2 Wire Reverse Polarity by U.S Solid
- SAFE AND RELIABLE- Made of SS304 steel, with NSF certification, this ball valve is safe for drinking water.
- NPT THREADING- 1/4” Stainless steel threading, manufactured and measured according to National Pipe Thread standards.
- 9V-24V DC- Works effectively over entire voltage range.
- Limit switch cuts off power after valve is fully open....
- 2 WIRE REVERSE POLARITY SETUP- Simple two wire connection, valve completely de-energizes after opening or closing.
- ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
- This reduces likelihood of overheating, making it a....
Check Stock
