Categories

Best Tyc Electric Motors

CHANCS TYZ42 Synchronous Motor AC 12V 5r/min CW/CCW Shaft 35mm TYC40 Gear Motor for Fiber Optic Christmas Ornamen …

  • This is a TYC-40 AC 12V CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • 【Specification:】 Product Name : Synchronous Motor； Model : TYC-40； Shaft Diameter: 4.5mm ； Shaft Length: 35mm； Shaft Screw Thread Inner....
  • 【Application:】 Widely used in Christmas tree, decorative colored lights, hand-made, school project, electric fan shake heads, heaters, prayer....
  • 【Attention:】 The applicable voltage of this motor is AC 12V. USING DC POWER SUPPLY, THE MOTOR DOES NOT WORK!! And too high voltage will burn the....
  • 【Package Content:】1PC x Synchronous Motor；1PC X Screw ；1 PC X Wire Quick Connector.
Check Stock

TYC 620560 Jeep Cherokee Replacement Radiator/Condenser Cooling Fan Assembly

  • OE-comparable, perfectly balanced unit ensures ease of installation.
  • Unitized replacement unit with fan, motor, and shroud maximizes efficiency in replacement.
  • TYC 620560 is replacement only for the electric type fan and not for the clutch type fan.
  • All units are test-fitted onto the corresponding radiators prior to release to ensure precise, consistent fit.
  • Legal compliance through patent license agreements with Bosch/Continental VDO (where applicable) for turbine-like blade and shroud designs, providing an additional level of confidence and protection.
Check Stock

TYC 18-5478-00 Toyota Tundra Driver Side Replacement Signal Lamp

  • All TYC lamps are subject to rigorous vehicle test fit and other procedures.
  • Quality drop-in and hassle-free products.
  • Numerous and arduous lighting parameters subject each lamp design to real world conditions.
  • TYC-mandated internal quality control measures ensure product reliability and ease of installation.
Check Stock

TYC Left Headlight Assembly Compatible with 2000-2004 Chevrolet Impala

  • All TYC lamps are subject to rigorous vehicle test fit and other procedures.
  • Quality drop-in and hassle-free products.
  • Numerous and arduous lighting parameters subject each lamp design to real world conditions.
  • TYC-mandated internal quality control measures ensure product reliability and ease of installation.
  • "Drop-in fit", with comparable tolerance, virtually identical mounting provisions, and interchangeability with OE wiring harnesses.
Check Stock

2PCS Synchronous Synchron Motor 50/60Hz AC 100~127V 4W 5-6RPM/MIN CCW/CW For Hand-Made School Project Model or Guide Motor 5-6RPM

  • Typical Applications: heater machine / electric fan / Christmas tree / Air conditioner / Massagers / Dynamic Visualizer / Arts & Crafts lighting /....
  • An Good Motor For Hand-Made, School Project, Model And Anything Else You Want..
Check Stock

2PCS TYC-40 AC 12V 50/60Hz Synchronous Motor 5RPM CW/CCW 1-2W for LED Decoration Christmas Ornament Shaft Length 33mm

  • 1,Synchronous motor operates on AC 10-12V, low noise and robust,TYC40 50/60HZ,CW/CCW,1-2W,5RPM/Min.
  • 2, Shaft Length: approx. 1.46 inches/46mm ,Shaft Diameter: 4.5mm/0.177inches.
  • 3,Widely use for LED Decoration Christmas Ornament art work hand-made school prokect model and so on..
  • 4,Package inlcude: 2pcs TYC40 motor + 2pcs White Quick Connector Terminal.
Check Stock

Annurssy Brackets & Hinge Assembly for Boat Engine Outboard Electric Trolling Motor

  • Approved for up to 40hp motors (for motors without factory trim and tilt or standard BIA bolting pattern).
  • Works with 0-20hp motors with electric trim and tilt.
  • The Mini Electric On The Fly Jack Plate is easy to install.
  • Our jack plates can be raised and lowered by a up/down push button while on the water within seconds from top to bottom..
  • 3 year warranty on the jack plate housing - 1 year warranty on the electric actuator.
Check Stock

Carbon Brushes 999038 for Hitachi Power Tool Motor

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

Watersnake Venom 34lb Thrust Electric Motor (Fresh & Saltwater)

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

Watersnake Venom Swet 54 Pound Thrust 12V Electric Trolling Motor with 42\ Steel Shaft

  • STURDY SIMPLE DESIGN: Our Watersnake Venom SXW electric motors provide saltwater anglers with a versatile range of tiller-steer transom-mount motors that are loaded with clever features. The shafts on all Venom SXW motors are an extra-tough composite constructed specifically for use in saltwater marine environments. The tiller handles are telescopic for versatility, comfort and control..
  • CONTROL + FEATURES: The 34lb motors have a two-blade propeller. The 54lb motors each run a three-blade propeller. All propeller shafts are stainless steel and the props have a weedless design, so you can push the boundaries during your next adventure. All the motors run on 12V power and operate with 5 forward and 3 reverse speeds, which are controlled with the tiller handle throttle..
  • ELECTRIC POWER: 54 lbs thrust, 12 Volt motor, 13-54 Amps / 34 lbs thrust, 12 volt motor, 7.5-34 amps. Battery Not Included. Each motor is suited to boats ranging from small tenders and tinnies up to dedicated estuary and inshore sportfishing boats..
  • VERSATILE TRANSOM MOUNT: The compact and stylish new Venom motor head design incorporates a new thicker ergonomic grip for the tiller handle. The new head design also includes a digital voltage meter display, so you can keep track of your batte....
Check Stock

Hitachi 49C60 LVDS Cable Ribbon (Main Board to Panel)

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

Watersnake 3 Blade Propeller Kit for 12 Volt Motors

  • COMPATIBILTY: This boat propeller is compatible with Watersnake electric trolling 12 volt Assault and Venom motors..
  • QUALITY: Our Watersnake electric motors are increasing anglers’ catches in more than 30 countries. You’ll see our motors attached to the bows of tournament bass boats, mounted on family fishing boats, locked onto the transoms of the traditional tinny and even powering modern kayaks and canoes. We try to keep things simple at Watersnake and so every day our team focuses on just one thing: making better motors..
  • DURABLE: Watersnake Trolling motor propeller replacement kit is durable and made to last. Designed to chew through the heaviest of underwater grasses and marsh while maximizing thrust to provide speed and efficiency in the water..
  • KIT INCLUDES: Propeller, propeller nut and shear pins..
Check Stock

CHANCS TYC-40 12V AC 5RPM Shaft 35mm Synchronous Motor With AC Wall Power Adapter - Input 110V Output AC 12V For Christmas Decoration

  • 【Description:】It's a combination of an AC 12V motor and a input AC 110V and output AC 12V power supply. Easy to install and easy to operate. The....
  • 【TYC-40 AC 12V Shaft 35mm Synchronous Motor Parameter:】 Voltage: 12V AC； Speed: 5r/min ； Shaft Length: 35mm； Shaft Screw Thread Inner....
  • 【AC Power Supply Parameter:】 Input: AC 110-120V； Output: AC 12V ； Output current: 1500mA； Frequency: 60Hz； Power: 15W； Wire Length:....
  • 【Attention:】 1.The power adapter is an AC power supply,NOT suitable for DC motor. 2.Too high voltage will burn the motor and power supply..
  • 【Package Include: 】 1*TYC-40 12V AC 5RPM 35mm Synchronous motor； 1*AC Power Supply.
Check Stock