Categories

Best Type 2 Cng Cylinder

X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

  • 【Parameters】Engine type: Gy6 single-cylinder four-stroke, engine oil type: Sf15w-40 without oil, carburetor type: pd24j, carburetor type: horizontal vacuum carburetor, spark plug type: a7tc, ignition type: cfw, cooling: air cooling, oil number: >=87#, compression ratio: 9.2:1, clutch: shoe type automatic centrifugal dry clutch, transmission: cvt, ignition system: Cdi, starting method: electric/kick.
  • 【Specification】 Displacement: 150cc, maximum power (Kw/R/Min): 6kw/7500r/Min, rated power (Kw/R/Min): 5.2kw/7000r/Min, maximum torque (Nm/R/Min) : 7.6nm/6500r/Min, minute steady idle speed 1600±150r/Min, piston diameter: 57.4mm, piston stroke: 57.8mm, bore and stroke 2.26" X 2.28" (57.4mm X 57.8mm), lubrication capacity: 0.26 gallons (1200ml), cylinder working volume: 0.03 gallons (149.6ml), speed: 8 poles.
  • 【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
  • aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
  • crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
  • lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wea....
Check Stock

Piston Bumper Stop 901901 Compatible with Porter Cable FC350 FR350

  • Compatible with FC350 Clipped Head Framing Nailer Kit,FC350 Type 1 Framing Nailer Clip,FC350 Type 2 Framing Nailer Clip,FC350 Type 3 Framing Nailer Clip.
  • Compatible with FR350 Round Head Framing Nailer Kit, FR350 Type 1 Framing Nailer Round, FR350 Type 2 Framing Nailer Round,FR350 Type 3 Framing Nailer Round.
  • This Part Acts as a Cushion When The Piston/Driver Retracts Back Into The Cylinder After Being Fired.This Piston Bumper is Located Cylinder Cap of Nail Guns..
  • Warning:It does not fit FR350 MAG Type 1 nailers!!!.
Check Stock

901901 Piston Bumper Compatible with Porter Cable FR350 FC350 (1)

  • Piston Bumper Part Number: 901901, 886151, this Piston Bumper is located Cylinder Cap of nail guns..
  • Compatible with FC350 Type 1, FC350 Type 2, FC350 Type 3, FR350 Type 1 Round Head Framing Nailer, FR350 Type 2 Round Head Framing Nailer, FR350 Type 3 Round Head Framing Nailer..
  • The Product Function: This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired..
  • Purchase Notes:Pleases make sure the part number of new replacement matches your original equipment before ordering. If you encounter any problem, feel free to let us know. We will be more than happy to reply your message within 24 hours..
Check Stock

Cylinder Piston Kit 41.1mm For Poulan 1950 1950LE 1975 1975LE 2050 2050LE 2050WT 2055 2055LE 2075 2075LE 2075C 2075OC 2150LE 2150LX 2250LE 2350 2375 2375LE BH2160 2550T 2450 2550 2550LE 2550SE

  • 41.1MM Cylinder Piston Kit For Poulan Gas Chainsaw PN: 530 01 24-11 530 06 96-07 530 01 25-50 530 03 79-35.
  • Fit For Poulan Gas Chainsaw 1950 Type 6 1950 Woodshark Type 7 1950 LE Woodshark Type 2 1950 LE (Type 1,2) 1975 Type Type 6 1975 Woodshark Type 7 1975 LE Woodshark (Types 1,2) 2050 Pioneer (Types 1,2,3,4,5,7) 2050 LE Pioneer (Type 1,2) 2050 WT Wildthing (Types 1,2,3,4,5,6,7) 2055 Woodsman Type 7 2055 LE Woodsman Type 2075 Type 5 2075 LE 2075C Type 5 2075OC Type 5 2150 Woodsman (Types 1,2,3,4,5,7) 2150 LE Woodshark (Types 1,2) 2150 LE Predator (Types 1,2) 2150 LX Woodsman.
  • Fits For 2155 Plus (Types 1,2,3,4,5 ) 2175 Wildthing (Types 1,2,3,4,5,6,7) 2175 2250 Woodmaster Type (6,7 ) 2250 LE Woodmaster Type (1,2) 2350 2375 Wildthing (Types 1,2,3,4,5,6,7) 2375 LE Type(1,2) BH2160 BH2160LE Titanium 2550T 2450 Type (6,7) 2550 Type(6,7) 2550LE Type 2 2550 SE (Type 1) 2555 FLW.
  • Package: 1 x Cylinder 1 x Piston 1 x Piston Pin 2 x Piston Ring 2 x Circlips 1 x Service Card.
  • Free And Fast Shipping By Epacket To U.S. Arrival 7-15 Business Days.
Check Stock

A/C Refrigerant Liquid Hose - Compatible with 2006-2011 Honda Civic 4-Door

  • Compatible with or fits: 2011 Honda Civic EX-L 4dr 1.8L 4 Cyl R18A1 MFI Electronic SOHC GAS | 2009 – 2011 Honda Civic LX-S 4dr 1.8L 4 Cyl R18A1 MFI Electronic SOHC GAS | 2007 – 2011 Honda Civic DX 4dr 1.8L 4 Cyl R18A1 MFI Electronic SOHC GAS | 2007 – 2011 Honda Civic EX 4dr 1.8L 4 Cyl R18A1 MFI Electronic SOHC GAS | 2007 – 2011 Honda Civic GX 4dr 1.8L 4 Cyl R18A4 MFI Electronic SOHC CNG | 2007 – 2011 Honda Civic LX 4dr 1.8L 4 Cyl R18A1 MFI Electronic SOHC GAS.
  • Compatible with or fits: 2006 Honda Civic DX 4dr 1.8L 4 Cyl R18A1 SOHC GAS | 2006 Honda Civic EX 4dr 1.8L 4 Cyl R18A1 SOHC GAS | 2006 Honda Civic GX 4dr 1.8L 4 Cyl R18A4 SOHC CNG | 2006 Honda Civic LX 4dr 1.8L 4 Cyl R18A1 SOHC GAS.
Check Stock

AudioCodes MediaPack MP114/4O/SIP 4 FXO Ports SIP Gateway

  • Rich subscriber feature set: 3-way conference with local mixing, call pickup, hunt groups, call forwarding, call hold and call transfer.
  • Echo cancellation, jitter buffer, voice activity detection (VAD) and comfort noise generation (CNG).
  • Complies with MGCP, H.323v4 and SIP control protocols.
Check Stock

New Cylinder Engine Hone Kit 2\ to 3\ Honing Machine + 32 PCS.

  • Cylinder Engine Hone Kit 3-1/2" To 6-1/2" + 32 Stones+ 4x Extra Carriers.
  • Stone Grit::120, 180, 220, 320 , Machine Type:Honing Machine Function:HoningModel Year:2021.
  • Heavy Duty CYLINDER ENGINE HONE KIT - 3-1/2" To 6-1/2"HONING MACHINE WITH HONING STONES + Extra Set Of 4x Stone Carriers (As Shown In First Image) COARSE 120, MEDIUM 180, FINE 220, Extra Fine 320 COMPLETE HONING MACHINE - HONE KIT.
  • SIZE – 3-1/2" To 6-1/2" Heavy Duty CYLINDER ENGINE HONE KIT WITH HONING STONES COMPLETE HONING MACHINE - HONE KIT With HONING STONES 8x COARSE 120, 8x MEDIUM 180, 8x FINE 220, 8x SUPERFINE 320.
Check Stock

XS-Power 93-01 HONDA PRELUDE H22A1 H22a4 h22a HEADER GASKET exhaust manifold gasket

  • Sturdy & Durable: This complete cylinder head is made of premium aluminum material, which can endure high pressure, and overheating, not easy to be....
  • Precisely Matched: It adopts advanced casting skills to build a high strength and stiffed cylinder head assembly, with an accurate dimension to help....
  • Superior Performance: The engine cylinder heads feature a compact structure, sits above the cylinders on top of the cylinder block. It traps or....
  • Complete & Assembled: Each of our cylinder head has gone through very strict quality inspections before being taken out of the factory and all of them....
  • Vehicle Fitment: This is a Cylinder Head, 2.4L SOHC 22R 22RE 22REC Engine Type, which is compatible with 1985-1995 4Runner 2.4L SOHC 8v 4Cyl, 1985....
Check Stock

Green Label Brand Micro Vacuum Accessory Kit Compatible with Dyson Vacuum Cleaners

  • DOES NOT FIT DYSON V7, V8 and V10 HANDHELD!.
  • Genuine Green Label Micro Vacuum Cleaner Attachment Tool Kit for Dyson.
  • Designed and manufactured to fit Dyson clip-type mounting. Fits: DC08, DC26 Allergy Cylinder, DC29, DC50 Animal and Multi-floor Uprights, DC47 Animal Cylinder, DC24, DC56 Hard Floor Handheld, DC25, DC11 Telescope Cylinder, DC18, DC22 Cylinder, DC17, DC14, DC21 Cylinder, DC59 / DC62 Animal Cordless, DC28 Upright, DC44, DC27, DC72, DC31, DC39, DC65/DC66, DC35, DC41 Animal, DC V6 Fluffy, DC23 Cylinder, DC40, DC V6 Absolute, DC 15, DC07, DC33.
  • PLEASE NOTE: One of the adapters has an air flow control valve which can not be fully closed (small holes). This is not a defect but intentional design. It is there for 2 reasons: 1) It was intentionally designed and manufactured this way to avoid too much suction on delicate electronics and jewelry items. 2) IT HELPS TO AVOID VACUUM CLEANER OVERHEATING WHICH MAY LEAD TO MALFUNCTION.
  • No questions asked return policy. Fully refundable. Green Label is a premium and environmentally friendly manufacturer of aftermarket vacuum and steam mop filters and accessories..
Check Stock

Can Crusher,Pneumatic Cylinder Can Crusher, Heavy Duty Air Cylinder Soda Beer Aluminum Can Crusher, Eco-Friendly Recycling Tool (Autofeed Button Valve)

  • ✅【HIGH QUALITY MATERIAL】Our cylinder tank crusher body is made of high quality iron, which is very strong and durable. The cylinder is made of high-quality aluminum alloy with good cooling performance, and the air tank compressor allows the used cans to enter the recycling bin for reuse..
  • ✅【AIR PUMP DRIVE】The surface of the cylinder type can breaker is sprayed with plastic, and the cylinder type can press is driven by an air pump, just press and turn the button to easily press the can. Compared with traditional spray paint, it has better wear resistance and corrosion resistance. The plastic-coated surface extends the life of this barrel can crusher..
  • ✅【HIGH WORKING EFFICIENCY】The aluminum cylinder with sufficient strength and rigidity provides high working efficiency for the can crusher. It is capable of crushing 20-30 cans per minute. The volume of the broken tank is less than 20%, which greatly reduces the volume of the tank and saves a lot of space..
  • ✅【WIDE RANGE OF APPLICATION】This cylinder type can crusher is equipped with all accessories. You just follow the instructions for a simple assembly and ready to use, the cylinder-type can breaker can handle cans with a capacity of less than 16.90 ounces. The operation is simple, l....
Check Stock

Pneumatic Cylinder Can Crusher Aluminum Can Crusher Soda Beer Can Crusher Air Powered Eco-Friendly Recycling Tool

  • High Quality: The main body of this cylinder-type can breaker is made of high-quality iron, which is strong and durable. At the same time, the cylinder is made of high-quality aluminum alloy with good cooling performance..
  • High Efficiency: Cylinder-type can crusher lets you say goodbye to the laborious manual flattening of cans, it can crush 20-30 cans per minute, making the recycling process more efficient and fast, and also greatly reducing the space occupied by cans..
  • Space Saving: The volume of the compressed volume is about 20% of the original volume, which greatly reduces the volume of the can and saves a lot of space..
  • Simple Operation: The cylinder-type can press is driven by an air pump, which can easily crush almost all types of aluminum cans at the push of a button..
  • Widely Use: This air can compressor can be used to recycle most aluminum soda, soda and beer cans, ideal for recycling stations, homes, and more. (ps: Cylinder-type can crushers can handle cans with a capacity of less than 16.90 ounces, and most cans on the market are less than 16.90 ounces.).
Check Stock

Seeutek 80cc Bicycle Engine Kit 26" 28" Bike Bicycle Motorized 2 Stroke Cycle Petrol Gas Motor Engine Kit Upgrade with Speedoemter

  • ...ire the universal mount. Notes: Be assured the mixing ratio for gas and oil:16:1 for break period (first 300 miles)/20:1 after to avoid motor lock up or piston seized. Please read attached instruction manual before installation..
  • 80cc bike motor kit, Mode of engine: single cylinder, air-cooling, 2-stroke.
  • chain length:110 links, 55 inches. Driving ratio:18: 01.
  • lubrication oil: motorcycle synthetic 2 stroke oil. Notes: Fuel Type:Gas 93# and please use premium quality oils to prolong engine life. And add some lubricant into the air cylinder before starting..
  • Horse power: 2.75 HP. Ignition type: CDI. Engine Type: Single cylinder, air-cooling, 2-stroke.
  • Chain Length: 110 links. Larger frame size requires drilling into bike frame and use of the universal face plate.Notes:If new carb leaking oil, take apart the bowl, bent down the claw a little down, leaking issues will be solved. And if no spark plug no spark, just remove the cap..
  • The engine air cylinder might take some time to adjust to the load. Thus to avoid po....
Check Stock

INTBUYING 10T Hydraulic Cylinder Liner Puller Dry-Type Splitter 80-137mm with Box（Dry-Type）

  • 【Computer Desk】10T Hydraulic Cylinder Sleeve Liner Puller Dry-Type Splitter 80-137mm with Box ..
  • 【Parameter Details】Maximum pressure: 10T.
  • Max Axial maximum pull distance： 50mm.
  • 【Included】9X pull plate ,1x Lifting plate,1x cardan joint,1x Lifting cylinder,1x handle,2x cylinder sleeve connecting rod,2x cylinder sleeve stand,1x cylinder sleeve beam.
  • 【Description】80-137mm 10T hydraulic cylinder liner puller dry-type Splitter：80 85 88 93 100 102 105-106 125-126 137..
  • 【Guaranteed】If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your purchase, we will provide a money-back guarantee..
Check Stock