Categories

Best U bolt Anchor Plate

1SHOT Steel Stud Anchor 250 Pack

  • Thread Dia.: M12, Pitch:1.75mm, Total Length: 250mm / 9.84"..
  • Material: 304 Stainless steel, anti-rust, anti-corrosion, durable to use..
  • Advantage: Designed for assembly fastening, screw into threaded nuts or tapped holes..
  • Application: Suitable for anchor bolts, clamps, hangers and U-bolts and many more projects..
  • Package: Includes 2 pack M12 x 250mm Fully Threaded Rod. Any questions feel free to contact us..
Check Stock

Anti Rattle Hitch Tightener Stabilizer No Sway for 2' and 1.25' Steel Heavy Duty Rust Free

  • [Compatibility] Hitch tightener can be used with 2" and 1.25" tow hitch receivers，including Curt, Rola, Yakima, Inno, Draw-Tite, Blue Ox, Hidden Hitch, Thule, Tulga, U-Haul and other brands. It is compatible with all hitch classes includes I, II, III, and IV (1, 2, 3 and 4), both 2” and 1.25” models, ideal for hitches on SUV’s, vans, trucks, RV’s, sedans and trailers..
  • [Material] Includes a heavy-duty U-bolt and thick powder coated plate that will last to all weather conditions and loads..
  • [Easy Installation] Convenient and easy to install! Simply slip the U-bolt over the receiver, slide the tightener plate into the bolt, and tighten into place. In just 3 easy steps and in less than 10 minutes..
  • [Safety] prevents from rattling, wobbling, rocking and hitch movement for cargo carriers, hitch racks, bike racks and trailer ball mount. Leading design of Tulga hitch tightener is the best anti rattle hitch tightener in the market..
  • [Warranty] Our heavy duty built hitch tightener is backed with 30 days money back guarantee and LIFETIME WARRANTY.
Check Stock

Lee Women's Regular Fit Straight Leg Jean, Anchor, 14 Petite

  • Extremely rugged and corrosion resistant.
  • Bolt or weld to structure for fall arrest anchor point.
  • Compact 1/4" x 2" x 4-1/2" (6 x 51 x 114 mm) 304 stainless steel plate.
  • D-ring anchorage plate with zinc plated steel D-ring and 304 stainless steel plate.
Check Stock

HYS VHF Marine Antenna Low-Profile 156-163Mhz Antennas W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable with PL259

  • Marine Antenna VHF 156-163MHz, 2 dBi signal with up to 50W of power.
  • W/16.4ft(5m) RG58 Low Loss Premium Coaxial Cable With PL259.
  • VHF Rubber Antenna Designed for any 156-163MHz device for receivers, 156-163MHz antenna for 156-163MHz device receivers to improve signal in receiving and transmitting..
  • Stainless Steel L-bracket&U-bolts, it comes with U-bolts which can be used with the attached plate for pole mounting..
  • The antenna does not come with mast pole mount.
  • it comes with TWO U-bolt which can be used with the attached plate for pole mounting..
  • Comes with mount and screws, easy to carry and install, the body of the VHF Marine Antenna makes it highly resilient to your Boat, Yacht etc use..
  • HYS VHF Marine Antenna made of high quality rubber with cable and clip, it will help you get longer communication range..
Check Stock

HiTow Trailer Hitch Tightener Anti-Rattle Stabilizer for 2' & 1.25' Hitch, Rubber-Coated No Rattle Noise, Corrosion Resistant

  • Compatible with all 1-1/4 inch and 2 inch Hitch, Rubber Coated.
  • Stops rocking, wobbling, banging, clanking and jerking caused by sloppy，take all the slop out, no rattle or fish tail, will providing a smooth and quiet towing experience.
  • Includes a heavy-duty U-bolt and thick powder coated plate that will stand up to all weather conditions and loads.
  • Easy installation by sliding the U-bolt over the stinger, sliding the tightener plate into the bolt, and tightening it in place with the included hardware, can be mounted from the bottom if hitch ground clearance is low.
  • Perfect for a variety hitch of SUV’s, vans, trucks, RV’s, sedans and trailers.
Check Stock

Disco Automotive 8681 Grey Replacement Hex Head Body Bolt Assortment

  • High quality: The bumper clip is made of high-quality nylon material, which is sturdy and durable, resistant to wear and corrosion, and the rivet clip is not easy to break or break. It is a new type of automobile bumper splash plate bolt hardware kit..
  • Reasonable design: The motive splash plate body bolt kit is small in size, light in weight and easy to carry. You can replace them anytime and anywhere. The rivet clip can replace and fix the bumper very well..
  • Versatility: Bumper clip bolts are widely used in car door decoration, bumpers, splash plate retainers, bell mouths, radiator guards, engine cover fenders, etc., and can also be used in furniture and electronic equipment applications..
  • Multi-scene use: This new engine splash plate bolt hardware kit is suitable for Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details)..
  • High-quality packaging and after-sales service: 15 built-in fender washer bolts and screws, 15 extruded U-shaped nuts, 20 bumper clips.
  • we support 180-day worry-free return and exchange, if you have any questions, please contact us directly, we Will reply you within 24 hours within working days..
Check Stock

Hardware Essentials 320898 Square U-Bolt-3/8X3Lx4W, Zinc

  • Square U-bolts are great for attachment to square shaped posts.
  • U bolt measurements are as follows – diameter (3’8”), thread count (16), inside length (3”), inside width (4”).
Check Stock

Permatex 80074 Belt Dressing Cond 5oz.

  • Permatex Belt Dressing and Conditioner extends belt life and penetrates the cord fibers of “V” belts to restore pliability and flexibility..
  • Belt Dressing and Conditioner prevents belt slippage due to heat, cold, dampness, dust, and glazing. Eliminates squeaking and slipping..
  • Suggested Applications: for easy removal of spark plugs, cylinder head and exhaust head bolts.
  • apply to anchor pins on brake assemblies, U-bolts and....
  • Directions: Shake well. Attach extension tube. While engine is running, spray lightly on inner working surface of belt near smallest or uppermost....
Check Stock

Universal Roof Box U-Bolt Clamps Cargo Carrier Roof Rack Bracket Kit Van Mounting Fitting Kit 85mm Internal Width 40mm Thick Luggage Rack Adjustable U Bolt Quick Release Latch for Roof Box Hardware

  • UNIVERSAL FIT - Universal roof box u-bolt clamps fit for car crossbars within 80mm, can accommodate luggage racks up to 40mm/1.57 inches thick, widely used in hatchbacks, sedans, SUVs, off-road vehicles, etc. NOTICE: Not fit for THULE Roof Box.
  • SIZE: Inner width 83mm/3.27 inches, outer width 90mm/3.54 inches, screw diameter 7mm/0.27 inches, 40mm/1.57 inches thick.
  • NOT EASILY DEFORMED - Roof rack mount u-bolt clamps has a rubber gasket and a plastic back plate, which can protect your car from scratches to the greatest extent, and can increase friction, which has a high hardness, good confinement effect, strong bearing capacity.
  • GALVANIZED STEEL MATERIAL - Universal roof box u-bolt clamps using galvanized steel material, durable, alkali resistance, and has a clear thread, uniform force and not easy to slip to improve overall stability.
  • PACKAGE INCLUDED - Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2pcs strap.
Check Stock

Rural365 Farm Gate Anchor Cane Bolt 18in - Farming Livestock Spring-Loaded Fence Gate Drop Rod Cattle Gate for Tube Gate

  • [Keep Your Cattle Secure]: The Rural365 Livestock Gate Anchor is designed to prevent your livestock from escaping as well as support your round tube....
  • [Built to Last]: Fence gate anchor rod holder constructed of stainless steel.
  • Gate drop rod will stand firm in rain, sleet, and snow to hold your gate....
  • [Easy to Install]: To install tube gate stop, place U-shaped attachments along the bottom of your gate, then screw on red base.
  • [Easy to Use]: Drop pin rod features wedged tip to break into the ground.
  • Lift curved handle to raise drop pin so you can move your gate.
  • [Package Contents]: Cane bolt tube gate stop package includes 2 U-shaped attachments, 1 red base, 1 attached spring, 2 screws.
Check Stock

Vehiclex Anti Rattle Hitch Tightener for 1.25\ and 2\ Hitch Receivers – 0.44\ U-Bolt Diameter – Protective Anti-Rust Coating

  • A TIGHT AND SILENT HITCHING. Stabilizes hitch mount, preventing its rattling and wobbling..
  • PROTECTIVE COATING. Rubber-coated U-bolt and powder-coated tightener plate reduce the risk of scratches, chipping, and corrosion in any weather..
  • FITS THE MOST COMMON HITCH SIZES. Tightens any brand hitches I, II, III, and IV classes for 1 1/4" and 2" receivers..
  • EASY INSTALLATION on bike racks and hitches for cars, crossovers, trailers, vans, SUVs, and trucks..
  • THE SET COMES WITH 0.44" U-bolt, 0.31" tightener plate, 2 lock and 2 flat washers and 2 nuts..
Check Stock

ZQULOYO 4 PCS Universal Stainless Steel Roof Box U-Bolt Clamps Rooftop Cargo Carrier Rack Bolts Car Van mounting Accessories U-Bracket Clips with 8 Lock Nuts 2 Strap Kit for Most Cars

  • 【FITMENT】This roof box u bolt clamps is suitable for most cars on the market, can be used for up 85mm(3.34 inch) width and 40mm(1.57 inch) thick luggage rack..
  • 【HIGH-QUALITY MATERIAL】u-bolt clamps using galvanized steel material, durable, good alkali resistance, acid resistance, corrosion resistance, strong temperature resistance..
  • 【FEATURE】This product has a rubber gasket and a plastic back plate，which can protect your car from scratches to the greatest extent, and can increase friction to improve overall stability..
  • 【EASY TO INSTALL】: No need to drill and install directly. Accurate mounting size and long-enough bandages, suit your roof box and daily opening and closing box..
  • 【PACKAGE INCLUDED】 Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2 bandages，1 Hole Sealing Sticker..
Check Stock

304 Stainless Steel Bench Pedestal - 16.25\ High

  • ROBINSON STEEL COMPANY IS PROUD TO BE THE MANUFACTURER OF THE ONLY FLANGED STYLE 304 GRADE STAINLESS STEEL PEDESTAL MADE IN THE USA.
  • 8.25" diameter x 11 gauge flange plates top and bottom.
  • Heavy Duty Steel Tube: 2" diameter x .12" wall (11 gauge).
  • Steel Tube is welded to top and bottom plate with a full 2" diameter weld 1/8" fillet.
  • Universal pedestal with three holes in top/bottom plate for bench and floor mounting, Stainless steel hardware is provided for mounting to bench tops, Floor anchor bolts are NOT provided..
Check Stock