Categories

Best U bolt Plate

HiTow Trailer Hitch Tightener Anti-Rattle Stabilizer for 2' & 1.25' Hitch, Rubber-Coated No Rattle Noise, Corrosion Resistant

  • Compatible with all 1-1/4 inch and 2 inch Hitch, Rubber Coated.
  • Stops rocking, wobbling, banging, clanking and jerking caused by sloppy，take all the slop out, no rattle or fish tail, will providing a smooth and quiet towing experience.
  • Includes a heavy-duty U-bolt and thick powder coated plate that will stand up to all weather conditions and loads.
  • Easy installation by sliding the U-bolt over the stinger, sliding the tightener plate into the bolt, and tightening it in place with the included hardware, can be mounted from the bottom if hitch ground clearance is low.
  • Perfect for a variety hitch of SUV’s, vans, trucks, RV’s, sedans and trailers.
Check Stock

Disco Automotive 8681 Grey Replacement Hex Head Body Bolt Assortment

  • High quality: The bumper clip is made of high-quality nylon material, which is sturdy and durable, resistant to wear and corrosion, and the rivet clip is not easy to break or break. It is a new type of automobile bumper splash plate bolt hardware kit..
  • Reasonable design: The motive splash plate body bolt kit is small in size, light in weight and easy to carry. You can replace them anytime and anywhere. The rivet clip can replace and fix the bumper very well..
  • Versatility: Bumper clip bolts are widely used in car door decoration, bumpers, splash plate retainers, bell mouths, radiator guards, engine cover fenders, etc., and can also be used in furniture and electronic equipment applications..
  • Multi-scene use: This new engine splash plate bolt hardware kit is suitable for Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details)..
  • High-quality packaging and after-sales service: 15 built-in fender washer bolts and screws, 15 extruded U-shaped nuts, 20 bumper clips.
  • we support 180-day worry-free return and exchange, if you have any questions, please contact us directly, we Will reply you within 24 hours within working days..
Check Stock

Hardware Essentials 320898 Square U-Bolt-3/8X3Lx4W, Zinc

  • Square U-bolts are great for attachment to square shaped posts.
  • U bolt measurements are as follows – diameter (3’8”), thread count (16), inside length (3”), inside width (4”).
Check Stock

Universal Roof Box U-Bolt Clamps Cargo Carrier Roof Rack Bracket Kit Van Mounting Fitting Kit 85mm Internal Width 40mm Thick Luggage Rack Adjustable U Bolt Quick Release Latch for Roof Box Hardware

  • UNIVERSAL FIT - Universal roof box u-bolt clamps fit for car crossbars within 80mm, can accommodate luggage racks up to 40mm/1.57 inches thick, widely used in hatchbacks, sedans, SUVs, off-road vehicles, etc. NOTICE: Not fit for THULE Roof Box.
  • SIZE: Inner width 83mm/3.27 inches, outer width 90mm/3.54 inches, screw diameter 7mm/0.27 inches, 40mm/1.57 inches thick.
  • NOT EASILY DEFORMED - Roof rack mount u-bolt clamps has a rubber gasket and a plastic back plate, which can protect your car from scratches to the greatest extent, and can increase friction, which has a high hardness, good confinement effect, strong bearing capacity.
  • GALVANIZED STEEL MATERIAL - Universal roof box u-bolt clamps using galvanized steel material, durable, alkali resistance, and has a clear thread, uniform force and not easy to slip to improve overall stability.
  • PACKAGE INCLUDED - Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2pcs strap.
Check Stock

Vehiclex Anti Rattle Hitch Tightener for 1.25\ and 2\ Hitch Receivers – 0.44\ U-Bolt Diameter – Protective Anti-Rust Coating

  • A TIGHT AND SILENT HITCHING. Stabilizes hitch mount, preventing its rattling and wobbling..
  • PROTECTIVE COATING. Rubber-coated U-bolt and powder-coated tightener plate reduce the risk of scratches, chipping, and corrosion in any weather..
  • FITS THE MOST COMMON HITCH SIZES. Tightens any brand hitches I, II, III, and IV classes for 1 1/4" and 2" receivers..
  • EASY INSTALLATION on bike racks and hitches for cars, crossovers, trailers, vans, SUVs, and trucks..
  • THE SET COMES WITH 0.44" U-bolt, 0.31" tightener plate, 2 lock and 2 flat washers and 2 nuts..
Check Stock

ZQULOYO 4 PCS Universal Stainless Steel Roof Box U-Bolt Clamps Rooftop Cargo Carrier Rack Bolts Car Van mounting Accessories U-Bracket Clips with 8 Lock Nuts 2 Strap Kit for Most Cars

  • 【FITMENT】This roof box u bolt clamps is suitable for most cars on the market, can be used for up 85mm(3.34 inch) width and 40mm(1.57 inch) thick luggage rack..
  • 【HIGH-QUALITY MATERIAL】u-bolt clamps using galvanized steel material, durable, good alkali resistance, acid resistance, corrosion resistance, strong temperature resistance..
  • 【FEATURE】This product has a rubber gasket and a plastic back plate，which can protect your car from scratches to the greatest extent, and can increase friction to improve overall stability..
  • 【EASY TO INSTALL】: No need to drill and install directly. Accurate mounting size and long-enough bandages, suit your roof box and daily opening and closing box..
  • 【PACKAGE INCLUDED】 Roof box rack mounting fitting U-Bolt clamp kits included 4pcs galvanized U bolts, 4pcs plastic backplane, 4pcs rubber gasket, 8pcs heavy lock nuts, 2 bandages，1 Hole Sealing Sticker..
Check Stock

CZC AUTO Hitch Tightener, Heavy Duty Anti-Rattle Stabilizer for 1.25\ and 2\ Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free (1 Pack, Carbon Steel)

  • CZC AUTO hitch tightener equiped with heavy duty φ0.4" U-bolt and 0.28" thick black powder coated plate anti-rattle stabilizer, can undertake all weather condition, rust free..
  • Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. Can help to decrease noise and give you a quiet world when towing..
  • This tow clamp is perfect for locking 1.25" and 2" hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan..
  • Easy to install, after insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom..
  • New arrival with very good price for only 1 month. Do not miss this price in hesitation. Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you..
Check Stock

uxcell Round U-Bolts 4 Sets 0.63 16mm Inner Width 46mm Length Steel M6 with Nut Plate Washer

  • Hex Nut Size: 10 x 5mm / 0.39" x 0.2"(Hex Width*H).
  • Frame Plate Size: 50 x 18 x 2mm/ 1.97" x 0.71" x 0.08"(L*W*T).
  • Round Washers Size: 18 x 6 x 1mm / 0.71" x 0.24" x 0.04"(OD*ID*T).
  • Package Content: 4 x U-Bolt, 8 x Nuts, 8 x Round Washers, 4 x Plates.
  • Material: Steel construct u bolt, galvanized surface treatment, bending forming processing technology with great performance in antirust and corrosion resistance, high hardness and good tensile strength..
  • Application: U-bolt is used to fasten or attach locking components to pipes, wood, etc. Just insert and tighten the nuts at both ends. It is suitable for the connection of boats, pipelines, trailers, and industrial steel structure conduits..
Check Stock

RETRUE Hitch Tightener, Hitch Stabilizer Heavy Duty Anti-Rattle Clamp for 1.25" and 2" Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free

  • Premium Quality. RETRUE hitch tightener equiped with heavy duty φ0.4" U-bolt and 0.28" thick black powder coated plate anti-rattle stabilizer, can undertake all weather condition, rust free..
  • Practical and Functional. Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. Can help to decrease noise and give you a quiet world when towing..
  • Utility Use. This tow clamp is perfect for locking 1.25" and 2" hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan..
  • Hitch Tightener Installation. After insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom..
  • From RETRUE your reliable partner, model HT001. If you encounter any problems, please feel free to contact us through the "Ask a Question&q....
Check Stock

uxcell U-Bolts M8 D x 1\ W x 2-1/16\ L 304 Stainless Steel with Nuts Washers Frame 2Pcs

  • National 3/8 In. x 4 In. x 7 In. Zinc Square U Bolt.
  • National catalog model No. 2192BC square U bolts, zinc plated.
  • Designed for securing various products to rectangular wood and metal objects.
  • Plate and hex nuts are included. Manufactured from steel wire with zinc finish.
Check Stock

3 inch Rear Leveling Lift Block for F150, 3″ Lift Level Kit with Extra Long Square U Bolts Compatible with 2004-2022 Ford F-150 2WD/4WD

  • Compatible Vehicles: 2004-2022 Ford F150 2WD will raise the rear 3″ ,2009-2022 Ford F150 4WD will raise the rear 1.5″ ,2004-2008 Ford F150 4WD will raise the rear 1″..
  • Extended Bolts: Grade 12.9 U-bolts, thread pitch 9/16-18, Our U-bolts are longer than the original bolts and are better suited for retrofitters. If they are too long, you can cut them as needed..
  • Lift Block: Cross Gusset Plate Locked design, CNC automatically machined to ensure high precision and stability, with anodized and heat-treated surfaces to enhance corrosion resistance..
  • Kit Features: Easy bolt-on installation in about 1-2 hours, no special tools are required. Improve the stance of your vehicle and provide additional fender clearance for larger tires and wheels..
  • Premium Services: We offer “30-day refund, 24-month free replace parts ” service. If you have any questions, please contact the customer service team for further assistance..
Check Stock

MYCAN Hitch Tightener Anti Rattle Hitch Stabilizer for 1.25 and 2 Hitches Locking 2 inch Receiver Trailer 304 Stainless Steel clamp Reduce Movement from Trailer Hitch Cargo Carrier Bike Rack

  • The plate of the hitch tightener is constructed from powder-coated steel. U bolt, flat washer, and lock washer of this locking hitch tightener were....
  • Hitch Stabilizer Universal Fit, compatible with almost all hitch brands and hitch classes I, II, III, and IV (1, 2, 3, and 4), as long as your....
  • The Anti-rattle hitch tightener is Widely Use: Ideal for cargo carriers, hitch receiver, trailer ball mounts, shackle hitch, tow hook, bike racks,....
  • This Hitch stabilizer is easy to install, lock the receiver tube by U-bolt and plate, put on flat washers, spring washers, and fasten with nuts.
  • MYCAN Hitch Stabilizer provides Quiet & Stable Experience, prevent and eliminate unwanted hitch movement, wobble, rattle, rocking, and noises, ensure....
Check Stock

Tricktoppers 4 Black Anodized Knurled Billet Aluminum Motorcycle License Plate Frame Fastener Tag Bolts - 44 Mag Revolver Gun Cylinder Printed Emblem

  • 4 Custom Knurled Billet Aluminum Custom Logo Motorcycle License Plate Frame Tag Bolts For Most Motorcycle Models With Through Hole Mounting Brackets Like Harley, Honda, Ducati, Kawasaki, Victory,Indian & Many More Makes.
  • Features: Black Anodized Aluminum Finish Knurled Sides Large 1/4" Tall By .8" Round Billet Aluminum Head Custom Graphic Logo Steal Treaded Stud x 3/4" Long . No tools required to install with included wing nut fastener. MADE IN THE U S A.
  • Logo Features: High Resolution Graphics Printed on 3M Automotive Grade Vinyl Gel Top Polyeurethane Domed Sealed Graphics UV & Fade Resistant Graphics Scratch & Water Resistant Graphics Logo Size 3/4" Pre-installed for you by us.
  • Part Warnings: For Minimum 1/4 License Plate Holes That can be accessed from rear to tighten combo bolts Not Recommended for most cars & trucks with machine or metal screw mounting with limited or no access to rear of license plate to tighten tag bolts May work with some bumpers with access to back side to tighten nuts on some cars & trucks or trailers.
Check Stock