Categories

Best U pvc Pipe Fitting Mould

1-1/2" 4-way Tee PVC Fitting Connector

  • Furniture Grade means this fitting has a non-marked, glossy finish..
  • DO NOT use these fittings for plumbing projects..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4 way corner fitting is commonly used to build the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings. Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • 1-1/2″ Fittings fit on 1-1/2″ Schedule 40 PVC or Furniture Grade PVC. Please check out our PVC Sizing Guide (Specification Sheet) to make sure that you order the correct size PVC Fittings. PVC is NOT measured by the outside diameter, and doing so will result in receiving fittings that are too big for your pipe..
  • All four outlets are non-threaded sockets.
Check Stock

6Pack PVC Fittings 1-1/2Inch 5 Way, Furniture Grade PVC Elbow Fittings for 1-1/2Inch PVC Pipe, PVC Pipe Fitting Connector for Build PVC Structures Garden Enclosures Dog Agility Jumps Greenhouse

  • PVC Fittings for SCH40 1 1/2 Inch PVC Pipe: The 1-1/2 inch PVC fittings are perfectly suited for 1-1/2" Sch. 40 PVC pipe.
  • The 1-1/2 elbow fittings have an inside diameter of 1-7/8 inches.
  • Please Notes: PVC pipe sizes are named by measuring the inside diameter of the PVC pipe, as 1-1/2" PVC pipe has an inside diameter of 1-1/2" and an outside diameter of 1-7/8".
  • Furniture Grade 5 Way PVC Conner: 5-way PVC elbow is made of furniture grade PVC with solid PVC material thickness, super thick and heavy duty, widely used in indoor and outdoor DIY PVC structures, such as building greenhouse for vegetable garden and making agility equipment for dogs.
  • Professional Grade PVC Pipe Fitting: PVC fittings have a bright white finish and sturdy material that will last for years without yellowing and resist low temperatures and shocks.
  • tapered ends and extra-deep fitting sockets ensure smooth and stable PVC pipe connections.
  • PVC Connectors for Homemade Projects: PVC fittings 1-1/2 inch are widely used to build heavy duty items, such as patio furniture, 9 square in the air, building PVC pet structures, garden cage frames, homemade PVC shelves, making outdoor plant stand and PVC blanket forts.
  • Building Anything with PVC Fittings: 5 Way PVC fittings connect five pipe section....
Check Stock

Smart Vac SMP500 Central Vacuum System Power Unit

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

Central Vacuum Cleaner with Deluxe Accessory KIT-Set

  • Includes everything you need to prepare your home for a central vacuum system with 3 valves -Works with ANY brand of central vacuum you decide to install..
  • 1.) PVC Cement.......................................(QTY - 1) | 2.) Low Voltage Inlet Valve.....................(QTY - 3) | 3.) Mounting Plate(s)..............................(QTY - 3) | 4.) Couplings..........................................(QTY - 6).
  • 5.)Sweep 90 Fitting...............................(QTY - 9) | 6.) Short 90 Fitting..................................(QTY - 3) | 7.) 45 Degree Elbow...............................(QTY - 6) | 8.) Sweep Tee Fitting..............................(QTY - 2).
  • 9.) Pipe Straps Fitting.............................(QTY - 6) | 10.) Low Voltage Wire.............................(QTY - 45') | 11.) PVC Pipe 2 Inch OD/5' Lengths.- Actual each pipe length is 59 1/8 ".....(QTY - 45').
Check Stock

1CAMO 3-Way Tee PVC Fittings for 1 Inch PVC Pipe, SCH 40, White - 1 Inch PVC Elbow Fittings PVC Pipe Connectors - Build Heavy Duty Furniture with 1 Inch PVC Pipe (4 Pack)

  • HEAVY DUTY PVC FITTINGS: These 1CAMO 3-way elbow PVC fittings are made of durable furniture grade PVC, schedule 40. Furniture-grade means they can withstand heavier weights and have higher manufacturing requirements than ordinary plumbing fittings..
  • PROFESSIONAL PERFORMANCE: Our 3-way tee 90-degree pipe elbow fitting is manufactured with a sleek looking, glossy, white surface with tapered ends allowing for a smooth transition from the pipe to the fitting. Suitable for both indoor and outdoor use..
  • EASY TO INSTALL: These are a quick and handy solution for building any type of structure out of 1” PVC pipe, which requires PVC fittings 1 inch sizing. Each package includes FOUR, 3-way, 1 inch PVC pipe fittings enabling you to create a sturdy corner or elbow joint in projects, structures, and PVC plans!.
  • PERFECT FOR BUILDING PVC FURNITURE: These 3-way, 1 inch PVC pipe fittings are made with the highest quality material allowing for a long service life. You can use these furniture grade PVC fittings to connect PVC pipes and build the DIY projects you want..
  • WIDE APPLICATIONS: These PVC fittings are designed for building PVC furniture and structure out of PVC pipe, such as a PVC structure, greenhouse, tents, shelves, shoe racks, dog enclosure, flower stands, e....
Check Stock

SDTC Tech 1/2

  • FEATURE: Structural PVC Elbow Fitting has tapered edges and glossy surface, nice for display items such as DIY furnitures..
  • PVC CONNECTORS: 3 Way and 4 Way Heavy Duty PVC Pipe Elbow Fitting Kit, ideal for edge, corner and center connections, resistant to frost and corrosion, long service life..
  • MATERIAL: High quality SCH 40 PVC Fittings, can withstand impacts or drop from a substantial height, and won’t suffer any cracks or breakage..
  • SIZE: Fit 1/2 inch PVC pipe, PVC Connector for Center Connections, white finish with tapered sockets for a professional design..
  • APPLICATION: Furniture-Grade Parts, suitable for build shelves, pool products, chairs, desks, storage frames, garden support structure etc..
Check Stock

Oatey 30863 Heavy Duty Solvent Cement, 8 Oz, Can, Liquid, Clear

  • Heavy duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12” diameter with interference fit, up to 18” for non-pressure.
  • Low-VOC solvent cement meets California South coast air quality management district (SCAQMD) 1168/316a or baaqmd method 40 and various environmental requirements.
  • Heavy Duty Clear cement for use on all schedules and classes PVC pipe and fitting up to 12î diameter with interference fit, up to 18î for non-pressure.
  • Lo-V.O.C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD).
  • Thick formula fills gaps in large diameter pipe and loose fitting joints.
  • Recommended for potable water, pressure pipe, conduit and DWV.
  • Recommended application temperature 40°F to 110°F / 4°C to 43°C.
Check Stock

SharkBite 1/2, 3/4, 1 Inch PVC Disconnect Clip Set for Push to Connect Brass Plumbing Fittings, PVC IPS (Iron Pipe Size), UIP716A

  • SHARKBITE PVC DISCONNECT CLIP: 1/2, 3/4, and 1 inch disconnect tools are used to perfectly release a SharkBite PVC fitting from any white collar iron pipe-sized fittings.
  • can adjust or remove PVC SharkBite fittings in tight spaces for easy disassembly.
  • COMPATIBILITY: These push-to-connect fitting disconnect tools can be used to release the white collar of a SharkBite PVC fitting from schedule 40, 80, or 120 PVC pipe and schedule 40 and 80 CPVC.
  • ideal for marking proper safe seal insertion depth on a pipe for SharkBite fittings.
  • DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust.
  • SharkBite's quality and performance are field-proven and trusted in the plumbing industry.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in....
Check Stock

50pcs 1/2"(Dia) PVC U-Shaped Pipe Clamp Clip,Tubing Clips,Water Supply Pipe Clamp(20mm)

  • Product Name: PVC U-Shaped Pipe Clamp Clip.
  • Package includes:50 x PVC U-Shaped Pipe Clamp Clip.
Check Stock

CIRCOPACK UTILITY Grade 2 Inch 4-Way PVC Fitting Connectors For Use With Schedule 40, 2 Inch PVC Pipes (2 Pieces)

  • These are for use with Schedule 40, 2 inch pipes. Do note that Schedule 40, 2 inch PVC pipe has an Outer Diameter of 2.375 inches..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4-way corner fitting is commonly used to building the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings..
  • Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • These unprinted UTILITY grade fittings are an affordable alternative to the high gloss, high price, furniture quality PVC fittings..
  • This is a CIRCOPACK brand 2 piece value bundle. Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product. CIRCOPACK is a Value Emporium brand..
Check Stock

FORMUFIT F012CRX-UV Cross PVC Fitting, Furniture Grade, 1/2\ Size, Clear

  • FOUR DEEP SOCKETS: Connect up to four (4) PVC pipe segments in a cross configuration. 20% Deeper sockets than plumbing fittings..
  • WORKS WITH 1/2" SIZE PVC PIPE: Fits 1/2" Size PVC Pipe, which has an outside diameter of 13/16" (0. 840"). Uses either off-the-shelf 1/2" Size pipe or FORMUFIT Furniture Grade PVC pipe..
  • MADE TO LAST, EVEN UNDER LIGHTS: UV resistant PVC material resists indirect sunlight and fluorescent lighting degradation. No yellowing, discoloration or cracking unlike sub-par PVC fittings.
  • NO MARKS, LOOKS GREAT: Glossy, clean unmarked surfaces for a professional look with tapered ends on each socket end to allow a smooth transition from the pipe to the fitting. Will not snag clothing or pet hair like plumbing grade PVC fittings.
  • COMPLETEMENTS YOUR DESIGN: Maintains the same socket depth, fit, finish and color as all other FORMUFIT products.
  • MADE IN USA: Manufactured in the USA with a 1 year manufacturer.
Check Stock

letsFix PVC Elbow Fittings 1 1/4 Inch, 3-Way/4-Way/5-Way PVC Connectors for SCH40 1 1/4 Inch PVC Pipe - Build Heavy Duty PVC Furniture and Plumbing Projects Available, White [Pack of 4]

  • 【Premium Quality】Made of high quality plastic material, the fitting is able to withstand impact, not easy to crack or break..
  • 【PVC Fitting Size】This 5-Way PVC pipe fitting size is schedule 1 inch socket ,it's Ideal for Center Connections..
  • 【Widely Use】This PVC Pipe adapter is use for agricultural irrigation, soilless cultivation systems, furniture, shelves, pool products, DIY shelves products, spa, potable water, and chilled water applications..
  • 【Easy to Install】PVC is lightweight, easy to install, requires no special tools for cutting and is installed by solvent cementing..
  • 【100% Promise】Replacement or full refund can be provided if you are not satisfied with our 5 way PVC fitting..
Check Stock

FORMUFIT Furniture Grade PVC Pipe, 40", 1/2" Size, Black (3-Pack)

  • FURNITURE GRADE PVC PIPE – Made from ultra-strong, UV-resistant premium furniture grade PVC material. This is an engineered plastic that is designed for outdoor use, weatherability, and can be used in direct sunlight without becoming brittle or shattering..
  • SOLID, BEAUTIFUL PIPE – Monolithic, solid-wall pipe has the same color inside and out. Unmarked, glossy surface finish gives a clean, professional appearance that makes projects look incredibly professional and properly finished..
  • UV RESISTANT – Infused with UV inhibitors to allow the pipe to be used in the sun. Will not crack, change color or degrade over time like plumbing-grade PVC pipe..
  • CONNECT EASILY: Join by solvent welding (standard clear PVC cement) or by press-to-fit. Can also be used with screws between where the pipe and fitting meet to make removable and reusable connections..
  • PRODUCT SPECIFICATIONS: Fits 1/2” Size PVC fittings. Pipe has an actual outside diameter of 0. 840 in. (13/16 in. ). Average Inside Diameter: 0. 622 in. . Minimum wall thickness: 0. 109 in..
Check Stock