Categories

Best Uhmw Plastic

Yes4All Horizontal Wall Mounted Olympic Barbell Rack - 6 Bar Vertical Barbell Storage Rack - Weight Bar Holder (2 Pairs)

  • SAVE SPACE & KEEP BARS ORGANIZED: Yes4All weight Olympic bar rack is the best way to space workout space Keep your bar organized and help you to have an easy access to weight bar easier.
  • HEAVY STEEL CONSTRUCTION: No more worries about falling bars, our bar rack storage is constructed of 7-gauge steel for the most durable bar rack you can find. Steel bar rack is covered with black powder finish to prevent rust & corrosion.
  • PROTECTIVE UHMW PLASTIC LAYER: Provide the UHMW plastic pad to protect your bar sharp knurling and shaft finish from wear & scratches even when you rack and unrack the bar multiple times.
  • VERSATILE BAR RACK: Designed to give ample space and fit well most of the barbells including Olympic/standard weight bar, 20 kg, 15 kg, short bars, Aluminum training bars and even axle bars.
  • EASY TO INSTALL: Hardware is included for quick and effortless installation. Can be installed on wood studs or masonry.
Check Stock

Starting Line Products Ski-Slips - Black 35-230

  • Made from high-quality UHMW plastic (the same material used in most plastic skis), which provides longer life and better performance than HDPE plastic.
  • Protect concrete floors, trailer decks, skis and carbides.
Check Stock

Yes4All Premium Barbell Safety Squat Bar Attachment - 1,000 LBS Capacity Squat Rack Spotter Arms 2x2 – Adjustable Height

  • Fit 2-inch x 2-inch power racks: Yes4All spotter arms are compatible with 2-inch x 2-inch power racks with 1-inch or 5/8-inch holes (BUT NOT ALL – PLEASE CHECK YOUR RACK DIMENSIONS BEFORE PURCHASING TO AVOID ANY UNWANTED RETURN).
  • Heavy-duty: Built strong enough to withstand up to 1000 pounds, these safety spotter arms can safely hold heavy loads..
  • Premium quality: Yes4All safety catches are made of heavy-duty square steel. This tough design will prevent the spotter arms from corrosion and breaking apart and concurrently offer the needed security and grip when you work out with the power rack..
  • Full adjustability: Easily adjust these spotter arms 2x2 to the desired height for your effective exercise training. Just twist, pull, and insert them into your preferred height..
  • Protective UHMW plastic pad: These safety spotter arms are reinforced with the UHMW plastic pad to reduce noise and keep your barbell free from damage..
Check Stock

Hatsbi UHMW Crosscut Sled For Table Saw Sled Miter Bars 3/4" X 3/8" X 36" -Predrilled holes and 20 screws included For Jigs Fixtures or Miter Slots (size 3/4"x3/8") 2 UHMW Bars

  • PREDRILLED HOLES - Each bar has 10 exact size designed predrilled and countersunk holes for 20 specific sized screws included that ensures no expanding of the material when screws are inserted..
  • EXCELLENT SLIDING MATERIAL - due to the low coefficient of friction it has, which makes it ideal for sleds where repetitive sliding is necessary..
  • VERY SLICK AND SELF LUBRICATING – Very high abrasion resistance. UHMW bars won’t leave any residue, dust or shavings. The non-stick surface is easy to clean..
  • EXTREMELY DURABLE – Ideal for constant repetitive use. UHMW (Ultra High Molecular Weight) Polymer (plastic) is 10 times heavier than regular high-density polyethylene for stability. UHMW won’t expand or contract like wood does. Does not absorb moisture and will not swell up over time due to exposure..
  • OUTSTANDING IMPACT STRENGTH - even at low temperatures. JIGS, FIXTURES OR MITER SLOTS (3/4” X 3/8”) – ideal for table saw, band saw or router table..
Check Stock

Hatsbi UHMW Crosscut Sled For Table Saw Sled Miter Bars 3/4" X 3/8" X 17" -Predrilled holes and 20 screws included For Jigs Fixtures or Miter Slots (size 3/4"x3/8") 2 UHMW Bars

  • PREDRILLED HOLES - Each bar has 5 exact size designed predrilled and countersunk holes for 20 specific sized screws included that ensures no expanding of the material when screws are inserted..
  • EXCELLENT SLIDING MATERIAL - due to the low coefficient of friction it has, which makes it ideal for sleds where repetitive sliding is necessary..
  • VERY SLICK AND SELF LUBRICATING – Very high abrasion resistance. UHMW bars won’t leave any residue, dust or shavings. The non-stick surface is easy to clean..
  • EXTREMELY DURABLE – Ideal for constant repetitive use. UHMW (Ultra High Molecular Weight) Polymer (plastic) is 10 times heavier than regular high-density polyethylene for stability. UHMW won’t expand or contract like wood does. Does not absorb moisture and will not swell up over time due to exposure..
  • OUTSTANDING IMPACT STRENGTH - Even at low temperatures. JIGS, FIXTURES OR MITER SLOTS (3/4” X 3/8”) – ideal for table saw, band saw or router table..
Check Stock

3M 5430 Squeak Reduction Tape – 0.875 in. x 15 ft. UHMW Polyethylene Tape Roll with High Tack Acrylic Adhesive. Tapes and Sealants

  • Transparent tape: the polyethylene film tape is designed to eliminate squeaking sound caused due to vibration or wear of plastics and metals. With slip-plane effect, this thin squeak reduction tape reduces friction to allow smooth surface contact.
  • Applications: this transparent tape with low surface friction and self-lubrication, can be used on a slithering, dissimilar surfaces where lubrication is not possible. It offers friction-free movement of drawers, doors, shelves, and cabinets.
  • Utility Range: UHMW tape offers a long-lasting, consistent adhesion and protect plastic and metal chutes, conveyors and guide rails from wear. It adheres to painted metals and plastic surfaces in industrial, manufacturing and distribution industries.
  • Special Feature. the UHMW Polyethylene tape is resistant to chemical and abrasion - making it ideal to use for commercial tasks. Anti-stick tape helps in releasing inks and adhesives easily without leaving the scratched surface.
  • Specification:  the 0.005 in. thick high tack adhesion tape roll is 0.875 in. wide and 15 ft. long.
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).

  • Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
  • white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
  • white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
  • High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
  • Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
  • Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
  • Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check Stock

JVCC UHMW-PE-20 UHMW Polyethylene Film Tape [20 mil carrier]: 1/2 in. x 18 yds. (Natural/Translucent)

  • JVCC UHMW-PE-20 UHMW Polyethylene Film Tape is a 20 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications..
  • Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement..
  • Applications include: rub strips on conveyors.
  • slide tape replacement on top of track saws, dead plates.
  • furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications..
  • Carrier/Backing: UHMW (Ultra High Molecular Weight) polyethylene film. Adhesive: acrylic. Release Liner: blue poly film..
  • Thickness: 21.8 mils (carrier, adhesive) 1.8 mils (adhesive) 20 mils (carrier). Adhesion: 60 ounces per inch (to stainless steel test panel). Tensile Strength: 50 pounds per inch (longitudinal). Service/Operating Temperature: up to 300F. Elongation: 300%. Core: 3-inch diameter....
Check Stock

Fulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet

  • ...e same length. Making small cuts, cross cuts and repetitive length cuts is where table saw crosscut sleds excel. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process..
  • Some time ago we noticed a lot of companies had UHMW bars available for purchase. While we as a woodworking company know exactly what they are used for, many novice or non-woodworkers do not. That’s when we decided to create this package with pre-cut UHMW bars, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, custom crosscut sled to fit your table saw!.
  • UHMW bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots. UHMW bars are also slick and won’t leave any residue, dust or shavings behind like wooden bars tend to do..
  • The tracks that are included in this kit are made from solid extruded aluminum and are Made in the USA. Each track is cut to length for the perfect s....
Check Stock

Synergee Squat Stand Rack with Pulley System, Tricep Rope, Pull Up Bar, J-Cups, Safety Arms, Landmine, Step Plate, Barbell Holder & Weight Plate Storage. 750lb Capacity.

  • ...d made 12 Gauge Steel to bring you the ultimate workout! So: PLEASE squat heavy. Add an extra set of 10’s. Do weighted pull-ups. Push your limits. Test your PRs. Our Squat Rack can handle it!.
  • ★ STRENGTH & BODYWEIGHT STATION ★ – Our V1 PLUS Squat Rack includes upgraded J Cups and safety arms with thick, UHMW plastic bolted to the surfaces your barbell will rest on. Our Squat Racks also have two 12-inch posts to hold bumper plates and aid with storage. It is ALSO fitted with a pull up bar to perform pull ups, set up gymnastic rings, and more! The V1 PLUS additionally comes with a Step Up Plate, Landmine Attachment, and a Barbell Holder..
  • ★ RED & BLACK ★ – This steel frame looks incredible with red vertical and black horizontal posts. That means, while it is adding a range of functionality to your space, it also looks AWESOME and will up your home or commercial gym’s cool factor by at least 10 points!.
  • ★ WHAT’S IN THE PACKAGE ★ – The V1 PLUS Squat Rack comes with a pull up bar, (2) J cups with UHMW, (2) safety arms with UHMW, (1) barbell holder, (1) step up plate, (1) landmine attachment, and (2) posts for plate storage. The Pulley System includes (1) 2” Loading Pin.
Check Stock

6892, 15 Series, White Double Keyed Unibearing Linear Bearing Pad (2 Pack)

  • Replacement unibearing bearing pad for 15 Series aluminum unibearing linear bearings..
  • Measures .513" tall x 1.25" wide x 2.77" long..
  • Made out of self-lubricating UHMW plastic..
Check Stock

6705, 10 Series, White Single Keyed Unibearing Linear Bearing Pad (3 Pack)

  • Replacement unibearing bearing pad for 10 Series aluminum unibearing linear bearings..
  • Measures .25" tall x .812" wide x 1.865" long..
  • Made out of self-lubricating UHMW plastic..
Check Stock

T-Rex Racing No Cut Frame Sliders for Kawasaki 2006-2008 Ninja 650R

  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum.
  • Fit Models: Kawasaki 2006 – 2008 Ninja 650R.
Check Stock