Categories

Best Uhmw pe Pipe Upe

T-Rex Racing 2017-2019 Kawasaki Ninja 650 / ABS/KRT / Z650 / Z900 Rear Axle Sliders

  • Material = UHMW-PE (ultra high molecular weight polyethylene).
  • NO CUT or plastic fairings modification required.
  • Fit Models = 2017 – 2019 Kawasaki Ninja 650 / ABS / KRT / Z650 / Z900.
Check Stock

Honeywell Natural Gas Permasert Version 2.0 Stab Coupling - 1 CTS - PN PC50103

  • Product: 1" CTS Stab Coupling Permasert Version 2.0 P/N: PC50103.
  • Details: 1-1/8" OD, 0.090/0.099/0.102 wall.
  • Fits line size: 1" inch CTS PE Tubing (1-1/8" Outer Diameter).
  • Used on Medium Density (yellow) PE Polyethylene plastic pipe for repairs or joining lengths together. Works for Natural Gas (NG) or Propane (LPG).....
  • IMPORTANT NOTE: There are various pipe sizes described as 1 Inch. This for CTS pipe not IPS pipe. These are different pipe sizing standards, so please....
Check Stock

1 CTS Elster Natural Gas Permasert Line Chamfering Tool Version 2 PN 58504

  • Line size: 1 inch CTS Poly Pipe (1-1/8" Outer Diameter) *Please review sizing diagram..
  • Creates a proper O.D. and I.D chamfer which prevent seal damage when stabbing of the PE piping into New 2.0 Permasert couplings. REQUIRED to properly....
  •  IMPORTANT NOTE: There are various pipe sizes described as either IPS or CTS. These are DIFFERENT pipe sizing standards with different OUTER and....
Check Stock

T-Rex Racing 2018-2019 Kawasaki Ninja 400 No Cut Frame Sliders w/aluminum inserts

  • Special features: Solid pucks, made to withstand a greater impact. Brackets are designed NOT to rotate in a low side..
  • Material: UHMW-PE (ultra high molecular weight polyethylene), aircraft grade aluminum.
  • No cut or plastic fairing modifications required.
Check Stock

T-Rex Racing No Cut Frame Sliders for Kawasaki 1994-2009 EX500 / GPZ500S / Ninja 500 / R

  • Material: UHMW-PE (ultra high molecular weight polyethylene).
  • Slider dimensions: approx. 5″ in length and 1.75″ in diameter.
  • NO CUTTING or plastic fairings modification.
  • Fit Models: Kawasaki 1994 – 2009 EX500 / GPZ500S / Ninja 500 / R.
Check Stock

T-Rex Racing 1994-2009 Kawasaki EX500 /​ GPZ500S / Ninja 500 / R No Cut Frame Exhaust Sliders

  • Material = UHMW-PE (ultra high molecular weight polyethylene).
  • Slider dimensions = approx. 5″ in length and 1.75″ in diameter.
  • NO CUTTING or plastic fairings modification.
  • Fit Models = 1994 – 2009 Kawasaki EX500 /​ GPZ500S / Ninja 500 / R.
Check Stock

General Tools Hose and Tubing Cutter #115 - Cuts up to 2 Inch Flexible Rubber, PVC, ABS and Polyethylene Tubing

  • CUTS RUBBER TUBING: Cuts up to 2-inch rubber hose or tube..
  • CUT PE OR ABS PIPE: Cuts up to 1-1/2 inch PE and ABS pipe..
  • CUTS PVC PIPE: Cuts up to 1-1/4 inch PVC pipe..
  • HOLDS TIGHT: The curved holder supports the hose or tubing during square cuts..
  • LONG HANDLES: Long handles for added leverage..
Check Stock

2017 - OnT-Rex Racing Kawasaki Ninja 650 / ABS/KRT Edition No Cut Frame Sliders (White)

  • Special feature = The pucks are solid and not hollow, made to withstand a greater impact.
  • Material = UHMW-PE (ultra high molecular weight polyethylene) and solid steel brackets finished in durable black powder coat..
  • NO CUT or plastic fairings modification required.
  • Fit Models = KAWASAKI 2017 – On Ninja 650 / ABS / KRT.
Check Stock

Titan Fitness T-2 Series Power Rack 83-inches High J-Hooks Single Pull-Up Bar

  • T-2 Series 2 x 2-inch 12-Gauge Steel Uprights.
  • 1-inch holes spaced 2-inches on the center.
  • Included: (4) heavy-duty steel uprights, (2) Pin and Pipe Safeties, (2) Weight Plate Horns, (2) J-Hooks with UHMW plastic, 1.25-inch Single Pull-Up....
Check Stock

SharkBite U701 PEX Tubing Cutter, For 1/4 Inch, 3/8 Inch, 1/2 Inch, 3/4 Inch, and 1 Inch Pipes

  • CUTS IN SECONDS: Place your PEX or PE-RT pipe in the pex into this pipe cutter and squeeze.
  • VERSATILITY: For clean, straight cuts, use with 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch and 1 inch SharkBite PEX tubing or PE-RT Pipe.
  • QUALITY: SharkBite's quality and performance is field-proven and is the only push-to-connect brand than can ensure a clean, leak-free connection.
  • PERFORMANCE: Use this PEX tool to create a clean cut for your SharkBite fittings.
  • PREFERRED BY THE PRO: All SharkBite products meet the same standards for commercial and residential plumbing applications.
Check Stock

TIPU 1-3/8

  • Ideal for reaming inside and outside diameters of plastic pipe , polycarbonate tubing, PVC pipe, PE pipe, PPR pipe.
  • Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.
  • This Inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop.
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4" x 3/8").

  • ...t T-track primary color, 2pcs. white-3/4"x3/8"x24"2pcs. white-3/4"x3/8"x36"2pcs. white-3/4"x3/8"x48" 2pcs. Make your crosscut sled to the size you want or need for your table saw and cutting requirements..
  • High Quality Material: UHMW Polymer (plastic) is a linear polyethylene material with a molecular weight ranging from 3,000,000 to 6,000,000. Furthermore, because UHMW is ten times heavier than regular high density polyethylene, it is extremely durable for constant repetitive use..
  • Smooth&No Residue: Because UHMW bars produce less friction than wood, they are commonly used as runners for crosscut sleds. Another benefit is that UHMW does not expand or contract like wood during extreme weather changes. Each bar measures about 3/4" x 3/8" and fits most standard table saw slots. UHMW bars are also slick and will not leave any residue, dust, or shavings behind, as do wooden bars..
  • Outstanding Impact Strength: Even at low temperatures, jigs, fixtures or miter slots (3/4” X 3/8”) – ideal for table saw, band saw or router table..
Check Stock

1 Inch CTS Yellow Medium-Density Poly Pipe Line for Gas Distribution PE2708 100 Feet

  • Yellow Medium-Density poly pipe for natural gas or liquid propan distribution. Bimodel MDPE (PE2708).
  • Min. Wall Thicknes: 0.090 (100 Foot Length).
  • Outstanding strength and durability providing longer pipeline service and enhanced pipeline integrity..
  • Provides outstanding resistance to slow crack growth (SCG) and rapid crack propagation (RCP) which provides for a safer gas distribution system..
  • IMPORTANT NOTE: There are various pipe sizes described as 1". This for CTS pipe not IPS pipe. These are different pipe sizing standards with different....
Check Stock