100-5982 Traction Control Cable for Toro Lawn Boy Mowers 10359C 10360 10360C 10361 10362 10363
- 100-5982 Traction Control Cable for Toro Lawn Boy Mowers.
- Fits Toro and Lawn Boy models including: Toro, 20711, 10330, 10334, 10335, 10356, 10357, 10358, 10359C, 10360, 10360C, 10361, 10362, 10363.
Check Stock100' 4-4-4 Vassar Aluminum URD Triplex Direct Burial
- High Performance | 16AWG 2 Conductor low voltage landscape wire. Pure copper wires. Flexible cable for installation around your home and commercial buildings..
- Direct Burial Rated | Install outdoor directly in the ground and trenches for seamless lighting installs. Our various sizes cover any ground you need. This cable is also waterproof and UV resistant for outdoor..
- Safer Cable | Our Landscape wire is UL listed of industry leading safety compliance. This includes UL 1581, UL 13, UL 1493 and CSA22.2. Pressure tested for durability in any environment..
- Uses | The best landscape cable for gardens, accent lights, patio lights, porches, walkways, deck, path, spot lights and underwater lights..
- Rating | Our 16 2 low voltage landscape wire can operate up to 30V applications..
Check Stock
Universal Ignitor, 120V Silicon Nitride Hot Rod Ignitor Replacement for Silicon Carbide Igniters of Gas-Fired Forced-air Furnaces, Water Heater and Boiler, Nitride Heater Igniter
- ... between 9 - 17 ohms), and you have to replace the nitride igniter.
- Materials: Consists of stainless steel 304 bright finish bracket, 1.97" nitride heating element, 1.18" ceramic insulator body, non-glazed 95% aluminia polished finish, 15-3/4" 20AWG/ UL 10362 specification 250°C temperature-resistance cable.
- Hot Side Ignitor/Igniter Specification: Rated voltage: AC 120V +/- 10%-15%, 50/60HZ, Cold resistance: 9-17Ω, Rated power: 150W, Temperature at 120v ± 0.5v. 60HZ at 17 sec ≧1180 ℃, Anti-overvoltage ability: igniter energized for 1 minute -132V. Igniter current not allowed to increase from 30 seconds to 60 seconds, the front required to move the stand is 10 lbs, Minimum≧5kgf.
- Easy to Install: Very simple, strong structure, not easy to damage, use high-quality packaging, waterproof and drop-proof, ensures that you can receive the perfect igniter. If you have any questions, you can contact us in time, we will reply within 12 hours.
Check StockfALLING
- Automatic Umbrella Makes for Easy 1 Handed Operation: We built our travel umbrella with an automatic operation system, opening and closing with just....
- Many Praises for the Repel Easy Touch Umbrella: Featured on TV and on Wire Cutter, our compact umbrellas for rain are known for their durability,....
- Heavy Duty Umbrella Stands Up to All Weather: Our strong umbrella is engineered for battle. No matter how much rain, snow, or sunshine Mother Nature....
- Most Umbrellas For Rain Can't Stand Up to High Winds, But Ours Does: Single canopy umbrellas are not built to withstand strong gusts of wind, easily....
- Mother Nature Is No Match for Our Folding Umbrella's Teflon Canopy: Our automatic umbrella is built with a Teflon coated double vented canopy that....
Check StockBlue Umbrella The Complete Recordings
- Automatic Umbrella Makes for Easy 1 Handed Operation: We built our travel umbrella with an automatic operation system, opening and closing with just....
- Many Praises for the Repel Easy Touch Umbrella: Featured on TV and on Wire Cutter, our compact umbrellas for rain are known for their durability,....
- Heavy Duty Umbrella Stands Up to All Weather: Our strong umbrella is engineered for battle. No matter how much rain, snow, or sunshine Mother Nature....
- Most Umbrellas For Rain Can't Stand Up to High Winds, But Ours Does: Single canopy umbrellas are not built to withstand strong gusts of wind, easily....
- Mother Nature Is No Match for Our Folding Umbrella's Teflon Canopy: Our automatic umbrella is built with a Teflon coated double vented canopy that....
Check StockCrazy Sax 2.0 Boris Roodbwoy & Ezzy Safaris Remix
- Black Umbrella Auto Open Function Makes For Easy 1 Handed Use: We built our travel umbrella with an automatic operation system, opening and closing....
- Many Praises for the Repel Easy Touch Umbrella: Featured on TV and on Wire Cutter, our compact umbrellas for rain are known for their durability,....
- Heavy Duty Umbrella Stands Up to All Weather: Our all black umbrella is engineered for battle. No matter how much rain, snow, or sunshine Mother....
- Most Umbrellas For Rain Can't Stand Up to High Winds, But Ours Does: Single canopy black umbrellas are not built to withstand strong gusts of wind,....
- Mother Nature Is No Match for Our Folding Umbrella's Teflon Canopy: Our automatic umbrella is built with a Teflon coated double vented canopy that....
Check StockStriveday 20 AWG 2 conductor wire Power Cable Audio Cable Speaker Wire (Red & Black) 33ft UL certification
- ▶MEET UL STANDARD: Certified 20AWG Stranded Wire 2 conductors from AWSOM is the ideal choice for a variety of applications include unique projects.
- ▶PREMIUM TINNED COPPER WIRE: 21pcs Tinned copper wire stranded in each conductors with a polyvinyl chloride insulation which resists heat up to 80 C (176F),Meets UL 2468 specifications.
- ▶VERSATILE: This Red Black Wire is suitable for your led lights 2 pin wire, speaker&doorbell installation.
- ▶DURABLE: PVC insulation protects against weather and abrasives,and flame retardant ability combined.
- ▶CONSIDERATE PACKAGE: Our 20 gauge wire comes wrapped in a spool which will make it easy for you to use or organized it.
Check Stock
WOD FGCT50SW PTFE Teflon Tape for Vacuum Sealer Machine, 2 inch x 36 yds - Hand and Impulse Vacuum Sealers, Fits FoodSaver, Seal a Meal, Weston - Fibreglass Fabric with Silicone Adhesive
- IDEAL REPLACEMENT FOR BURNT OUT TAPE FOR SEALING - The heating element of a vacuum sealer does not support deteriorated burnt out tape. The persistent attempts to accomplish sealing with the old distorted tape result in poor bag sealing and cause damage to the heating element sometimes. The Teflon Tape is a wise replacement to that and kills the barrier between the heating device and the bag. Tape is 3 TIMES LONGER than what is usually sold on Amazon!!!.
- IMPREGNATED FIBERGLASS MATERIAL ENSURES DURABILITY - The impregnated fiberglass cloth is layered with high temperature silicone adhesive to withstand harsh environments and critical applications. The fiberglass cloth material consists of warp, fill yarns, chemical, electrical, and mechanical properties to ensure durability and make it resistant to high temperature, chemical, drug, and abrasion..
- MESS FREE INSTALLATION AND FITS ALL MACHINES – The adhesive backing of this tape helps it to fit all vacuum machines. It is easy to peel off, dispense, and apply quickly over or under the wire for vacuum or impulse sealers respectively..
- MULTIPLE APPLICATIONS - PTFE Teflon tape is used to insulate heat sealing machines, electrical devices, guide conveyor device, conveyor chute equipments, bearing surfaces, tab....
Check StockPTFE Teflon tubing 5ft- 2mm ID X 4mm OD for 1.75 Filament Bowden 3D Printer -Allen Tech PTFE Teflon Tube
- ID:2mm(0.079'')/OD:4mm(0.158''),Length:5ft.Material: PTFE(common name:Teflon).For 1.75 filament Bowden 3D Printer,Translucent.
- Temperature range (Degree F):-454 to 500. Flame rating: UL-224 VW-1(UL-recognized). Density: 2.15-2.20 g/cm3..
- Excellent resistant to acids, alkali and all kinds of organic solvents: ASTM D543. High lubricating ability and non-stick.
- Raw materials meet FDA requirements per FDA 21 CFR 177.1550 for use with food contact surfaces.
- Excellent electric property and long life. Widely used in electronics, chemicals, medical and industrial.
Check StockCGELE K-Type Thermocouple Temperature Sensors 0~600℃，2M/6.6Ft Wire Probe Length 100mm Two Wire 100×5mm Stainless Steel Probe Temperature Detector Temperature Gauge…
- ♥This is a high quality temperature sensor.The proble is solid,and can not be bent easily..
- ♥Durable wire can withstand high temperature.
- ♥The high quality material Platinum is rustproof . Cable: 78.7 inch ( 2m ) metal braided line . The wire is made of shielded fiber glass wire ,thr wire can withstand 600℃ high temperature . It is compesation wire with shield feature . Much better than Teflon ..
- Probe Length : 100mm / 4" (Not Included Flexible Section)..
Check StockEwigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)
- Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
- Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
- MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
- Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
Check Stock
Dyna-Living Wind Turbine Generator 400W DC 12V 3 Blade Wind Turbine Motor with Charge Controller for Home Use Boat or Industrial Energy(Not Included Mast)
- [Low Noise and Durable]- The wind turbine motor adopts a three-phase DC permanent magnet synchronous generator, free running, low noise and long service life. Teflon wire is heat resistant, which is not easy to damage the wire when the machine is overloaded. It is smooth in operation, good wind resistance for double-row bearing..
- [High Wind Energy Utilization]-The coil is made of Teflon wire, which is resistant to high temperatures. It has effective regulation of current and voltage, with high wind energy utilization factor, which contributes to the annual energy output..
- [High-Quality Blades]-The blade is equipped with a copper inlay part that does not damage the nylon fiber when the bolt is tightened, the blades are not easily deformed or broken. The working temperature is -40 ° C ~ 80 ° C, do not worry about the temperature being too low and causing the leaves to freeze..
- [Unique Design]- The wind turbine generator adopts a permanent magnet rotor alternator and with a special kind of stator design, efficiently decreases resistance torque guarantees stability. The blades using reinforced glass fiber helped with optimized structure and aerodynamic shape, it enhanced wind power coefficient and power generating capacity..
Check Stock
PTFE Tape/Teflon Tape for Vacuum, Hand and Impulse Sealers (1/2-inch x 30 feet) - Fits FoodSaver, Seal A Meal, Weston, Cabella's by Impresa
- 1/2" wide x 30 foot long Teflon tape / PTFE tape roll with adhesive backing. Fits virtually all FoodSaver, Weston, Cabella's, Nesco and Seal-A-Meal vacuum sealers, as well as most models of hand / impulse heat sealers.
- Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the bag. Old tape causes poor bag sealing and can lead to a broken heating element and a broken sealer.
- Tape may be slightly wider and longer than necessary, allowing for broad compatibility. Strip should be replaced when appearing warn, discolored or if sealing isn't perfect.
- Just peel tape from the roll and place on the correct area (you may need to clean the strip location before placing the new piece of tape). Over the wire for vacuum sealers, under the wire for impulse sealers.
- Ideal for virtually all FoodSaver models including 4800, 2244, 3240, 4440, 4865, 3880, 3460, 2840, 3840, 3835, 2440, 2450, 2860, 2240, 2840, FM2000, FM2100, GameSaver, Professional, and many more. Great for Weston Pro 2100, 2300 and more. By IMPRESA (TM).
Check Stock
