Categories

Best Ultrasonic Power Measuring Meter

HFBTE LCR Meter Inductance Resistance Capacitance Tester Digital Bridge Meter with Testing Frequency 100Hz 120Hz 1KHz 10KHz 40kHz 100KHz Basic Accuracy 0.3%

  • LC200A portable meter is based on the LC resonant principle, adding high-speed micro-controller precision measurement calculation. The meter has wide measurement range and high precision, it's measuring range is below 1uH and 1pF. Wide measurement range, high accuracy, small size, light weight and portable..
  • LC200A series can be powered by mini USB cable or included Φ5 DC power supply cable. Note: The power supply voltage is 5V. You can also install 4 AA batteries to power the meter. If the meter is not used for 5 minutes when it is battery powered, it will automatically turn off the power..
  • There are five buttons. They are reset button in red, Hi.C, Hi.L, L/C and extended FUNC button in blue. Just press red the button to calibrate. Open circuit calibration in capacitance measuring mode. Short circuit calibration in inductance measuring mode..
  • Capacitance: 0.01pF-100mF. Inductance: 0.001uH-100H. Frequency: 500KHz/500Hz-50KHz. Accuracy 1% of capacitance range 1pF~1uF, 5% of range 1uF~100mF, 1% of inductance range 1uH~1H, 5% of range 1H~100H..
  • Package include: 1 x handheld LC meter, 2 x banana plug to alligator clip test leads, 1 x LCR kelvin alligator clip test lead, 1 x USB cable, 1 x charging cable, 1 x manual..
Check Stock

PUPILASH Capacitance Meter - Circuit Tester M6013 LCD High Precision Capacitor Meter Professional Measuring Capacitance Resistance

  • Power Supply: The meter can be powered by included Φ5 DC power supply cable and mini USB cable. You can also install 4×AA batteries. Each way makes the meter work. Note: the AA battery is not included..
  • Measuring Range: Capacitance 0.01pF-100mF, inductance 0.001uH-100H, frequency 500KHz/500Hz-50KHz..
  • High Precision: Accuracy 1% of capacitance range 1pF~1uF, 5% of range 1uF~100mF.
  • 1% of inductance range 1uH~1H, 5% of range 1H~100H.
  • Easy to Calibrate: just press the button "ZERO" to calibrate, open circuit calibration in capacitance measuring mode, short circuit calibration in inductance measuring mode..
  • Applications: This portable and handheld tester 1×handheld LC meter, 1 pair of alligator clip test leads, 1×LCR Kelvin alligator clip test lead, 1×mini USB cable, 1×manual.
Check Stock

RF Power Meter, 1-600MHz -60～-5 dBm Settable Power Attenuation Digital Display Of Signal Strength, RF Logarithmic Detector Amplifiers

  • The measuring power range of this RF power meter is ‑60～‑5 dBm, and the frequency range is up to 600MHz.
  • The RF power meter is light, compact and convenient, with a measurement power resolution of 0.1 dBm, and an output interface SMA_K..
  • This RF power meter comes with an LED screen, the data is clear and straightforward, and it is easy to use..
  • The precise mechanical structure of the RF power meter makes the measurement accurate, convenient and reliable..
  • The RF power meter has been inspected many times before it leaves the factory to confirm the quality..
Check Stock

5pcs Ultrasonic Module HC-SR04 MELIFE Distance Sensor with 3pcs Mounting Bracket 2 Wire Set for Mega R3 MEGA Mega2560 Duemilanove Nano Robot XBee ZigBee

  • Parameter -- New Version Power Supply: 3.3V -- 5V DC.
  • Operating Principle: Ultrasonic HC-SR04 distance measuring transducer sensor, it consists of ultrasonic transmitter, receiver, and control circuit..
  • HC-SR04 ultrasonic sensor module: Using IO trigger for at least 10us high level signal, when triggered it sends out a series of 40KHz ultrasonic pulses and receives echo from an object, the duration of the signal is the time from sending ultrasonic to returning..
  • Test Distance Formula: The distance between the unit and the object is calculated by measuring the traveling time of sound and output it as the width of a TTL pulse, HC-SR04 test distance following formula -- L = 1/2 x T x C (L is the distance, T is the time between the emission and reception, and C is the sonic speed)..
  • Package Include: 5 x New Version HC-SR04 Ultrasonic Sensors, 3 x Mounting Bracket with Screws, 10 x Female-Male Dupont Cables, 10 x Female-Female Dupont Cables..
Check Stock

Proster LCR Meter LCR Multimeter Tester for Capacitance Resistance Inductance Measuring Meter with LCD Over-range Display

  • Proster LCR Meter: inductance, capacitance and resistance measuring meter,it is a Specialdigital instrument which is easy to be operated, the reading....
  • High Accuracy : (Inductance) Measuring accuracy up to ±(2%+5).
  • (Capacitance) Measuring accuracy up to ±(2%+5)Forward voltage drop of diode:Displaty....
  • Rotable LCD Display : Multi angle adjustment for easy reading.There is no need to hold tester while measuring, more convenient operation..
  • New Version Test Leads: Comes with crocodile clip/ Test Loads/ mini Alligator Clip.
  • The black pen is connected to the negative pole and the red test....
Check Stock

Vibration Meter AR63B Handheld Vibration Sensor Meter High Precision Vibration Meter Tester Gauge, Vibrometer Analyzer

  • HIGH EFFICIENCY: The digital vibration meter uses the high-performance acceleration meter, realize the repetitiveness and accurate measurement. It has the function of testing axle bearing situation.
  • EASY TO USE: Vibration meter(also called also called vibration severity) uses Piezoelectric Acceleration Transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the Acceleration, speed, shift of the vibration.
  • MULTI-FUNCTIONAL: The vibration analyzer tester is multi-functional, which includes temperature measurement, auto switch range, back-light, auto power off.
  • IDEAL TOOL: This vibration meter can be used for measuring periodic motion, to check the imbalance and deflecting of moving machinery. Which is specifically designed for present measuring various mechanical vibration. So as to provide the data for the quality control, run time and equipment upkeep.
  • WIDELY APPLICATIONS: The vibration tester is widely used in the lines of power, petrochemical, machinery manufacturing, metallurgy, vehicles, etc..
Check Stock

Training and Racing with a Power Meter

  • ...r to offer ride insights to optimize your performance for competition or training. Connected to your bike computer via ANT+ / Bluetooth, LINK Transmitter allows you to focus on your speed, power output, or any ride data when it matters the most..
  • 【Lightest Wheel-Based Power Meter】AROFLY Power Meter is capable of measuring your accurate output while only being the size of a bottle cap, weighing less than 0.3 ounce. AROFLY Power Meter is directly installed to cycle rear valve (Only for CLINCHER tires) to monitor how the output from either of your legs change along the ride and keep you focused on your performance..
  • 【Patented Dynamic Pressure Variation Sensing Technology】The AROFLY Power Meter measures your ride power output by monitoring the variating tire pressure and other measurements combined. This is the first ever wheel-based power measurement system for accurate output recording..
  • 【Simple installation】Complete installation in under 10 minutes with no tools required, no modification to your drivetrain. Package contains LINK A1 Transmitter, Cadence Sensor and Power Meter, suitable for most types of bike tires, including Presta & Schrader Valves. AROFLY guarantees the riding experience and training quality of every cyclist through the rare....
Check Stock

Taidacent RF Power Meter Calibration RF Power Measurement 1MHz ~ 10GHz -50~0dBm RF Power Attenuation Value Can be Set

  • This is an RF power meter, which is operated by buttons..
  • Advantages: simple structure, convenient use, stable performance, reliability, high sensitivity and fast measurement speed..
  • Application: RF power measurement, instrument calibration.
  • Measuring power range: -50~+0 dBm (external RF attenuator can be extended to 100dBm).
Check Stock

CGOLDENWALL Handheld Ultrasonic Flowmeter Clamp on Flow Meter Portable Liquid Flow Meter with  S1+M2 Transducers for Copper/PVC Pipe DN15-700mm 1/2-28\ ((Old or New Panel))

  • S1+M2 TRANSDUCERS: Easy to setup the transducers on the pipe and enter the required information in the control unit.No need to destroy the pipeline and stop production during the measurement process.S1(DN15-100mm, 1/2-4"), M2(DN50-700mm, 2-28").
  • DIGITAL DISPLAY: The Ultrasonic Flowmeter can display cumulative flow, instantaneous flow, velocity, and working status at the same time. Accuracy: 1%, linearity: 0.50%, repeatability: 0.20% accuracy: ±1%, calibration certs included. Note: In order to provide a better user experience, we upgraded the product label. The product you received may be the old version or the new version.
  • DATA STORAGE AND OUTPUT: This Ultrasonic Flow Meter has a built-in data logger, which can store up to 2000 lines of measurement data. And you can download the logged data onto PC through the RS232 interface..
  • LONG STAND TIME: This Flow Meter is equipped with a built-in high-capacity rechargeable battery, which can support the flowmeter to work continuously for up to 12 hours..
  • WIDE APPLICATION: Come with S1+M2 transducers, and the measuring range is DN15-700mm, 1/2-28". It can work on Copper pipe, PVC pipe to detect the flow of liquids such as sea water, alcohol, river water, industrial sewage, lubricating oil, diesel, fuel oil, etc.N....
Check Stock

ALMOCN 6PCS HC-SR04 Ultrasonic Sensor Distance Module Measuring Ranging Sensor for Arduino

  • Ultrasonic hc-sr04 distance measuring transducer sensor, it consists of ultrasonic transmitter, receiver, and control circuit..
  • Hc-sr04 Test Distance following formula: L = 1/2 × T × C ( L is the distance, T is the time between the emission and reception, and C is the sonic speed).
  • Mode of connection:4 pins VCC, Trig (control side), echo (receiver), out (empty),GND.
  • Application:for Robot obstacle avoidance, object distance measuring, liquid level detection, public security, parking lot detection..
Check Stock

KETOTEK Digital AC Voltmeter Panel Mounting Meter AC80-300V Frequency Counter 45.0-65.0 HZ LED Display Voltage Volt Frequency Meter Tester Gauge

  • 【2 in 1 Multimeter】Voltage and frequency can be displayed with different color on the LED screen, red for voltage, green for frequency. It is clear and convenient to read..
  • 【Wide measuring range】Voltage: AC 80~300V, Hertz: 45-65Hz, Accuracy: 1% ± 2 digits, with high working efficiency of 2 times/s measuring speed..
  • 【No extra individual power supply】It can directly connect two wires to the tested voltage to measure voltage and frequency without power supply..
  • 【Ultra small size】2.68×1.65×1.5inch / 68x42x38mm. This Voltage Frequency Meter can be installed on anywhere flexibly..
  • 【More information】Operating temperature: 10°F~122°F/-10℃ ~ 50℃. Note: The AC current meter only suits for pure AC 50-60HZ power supply and can NOT be used for square wave, inverter output and sine wave circuit measurement of modified sine wave, otherwise the meter will be damaged..
Check Stock

CAMWAY LCR Meter LCD Capacitance Inductance Resistance Tester Measuring Meter Self-Discharge pF nF μF with Overrange Display

  • LCR Meter is Inductance, Capacitance, Resistance, Continuity Test And Diodes Measuring Meter, A Special Digital Instrument , Easy to Operat, Reading Accuracy Degree is Higher with LCD Display 1999 (3 1/2)..
  • Adopted Double Integral A/D Converter Core and A Large-Scale Integrated Circuits, Make The LCR Meter Inductance, Capacitance, Resistance Tester an Excellent Performance Instrument for Users..
  • Wide Measuring Range 200pF to 2000uF, Accuracy ±(2.5%+5), 200uH Tto 20H,Accuracy ±(2%+5), 200Ω to 200MΩ, Accuracy ±(0.8%+2)..
  • Multi-function : Auto Power Off, Data Hold function, Low Power Indication, ZERO ADJ for Capacitance , Large Screen Can be Flipped , Sampling rate is 3 times per Second..
  • Accessory : 1x Instruction Manual, 1xCertificate, A pair of crocodile clip , 1x 9V Battery, Designed to Safely and Accurately Troubleshoot A Variety of Automotive and Household Electrical Problems..
Check Stock

ELEGOO 5PCS HC-SR04 Ultrasonic Module Distance Sensor Compatible with Arduino UNO MEGA Nano Robot XBee ZigBee

  • Ultrasonic hc-sr04 distance measuring transducer sensor.
  • HC-SR04 consists of ultrasonic transmitter, receiver, and control circuit. When trigged it sends out a series of 40KHz ultrasonic pulses and receives echo from an object..
  • Package Content: 5pcs HC-SR04 with a little gift.
Check Stock