Categories

Best Unbalanced Cable

Mogami GOLD XLRM-RCA-06 Unbalanced Audio Adapter Cable, RCA Male Plug to XLR-Male, Gold Contacts, Straight Connectors, 6 Foot

  • Mogami GOLD XLRM-RCA Unbalanced Audio Adapter Cables are a premier choice to patch between consumer interfaces and professional PA systems. Designed for DJs and high-end consumer audio applications, this Mogami Gold series cable features low loss, neutral tone, and Mogami's signature shielding for a dead-silent background..
  • Use Mogami GOLD XLRM-RCA Adapter Cables for pro audio sound between devices equipped with an RCA output and devices equipped with an XLR input. Excellent for use as a DJ turntable-to-mixer patch cord. Use one cable for mono and two cables for stereo (left/right) audio applications..
  • Wired with Mogami 75 Ohm Miniature Coaxial Audio/Video cable, Mogami GOLD XLRM-RCA Cables are engineered with an Ultra High Density (UHD) spiral shield and an oxygen-free copper (OFC) core for the highest level of transparency and noise-free transmission..
  • This Mogami GOLD XLRM-RCA-06 Unbalanced Audio Adapter Cable is a 6 foot length. The Mogami GOLD XLRM-RCA Unbalanced Audio Adapter Cable series is also available in 3, 12, and 20 foot lengths..
  • Mogami Lifetime "No Excuses" Warranty: all brand new Mogami cables include Mogami's Limited Lifetime "No Excuses" Warranty to the original purchaser and are proudly supported by Mogami and their dedicated network o....
Check Stock

Audio Technica ATH-M70x Pro Monitor Headphones ATHM70x+Amplifier+Free Headphones

  • ... 4-channel stereo headphone distribution amplifier. Four independent 1/4" stereo headphone channels.
  • Individual volume control on each headphone channel. Two balanced 1/4" input connectors. Stereo 1/8" Aux input and output. Master Mute and Mono-summing switches. Specifications: Inputs: 2 x 1/4" balanced, stereo 1/8" unbalanced TRS. Outputs: 4 x stereo 1/4" unbalanced, stereo 1/8" unbalanced TRS. Controls: Master volume, master Mute, master Mono, 4 x Channel volume. Noise Floor: -114dBu, 22k BW unweighted. Maximum Output: 8.3 dBu, 1% THD+N, loaded 16R. Dynamic Range: 22dB, 22k BW.
Check Stock

Monoprice 104784 3' Premier Series XLR Female to RCA Male 16AWG Cable

  • An XLR to RCA cable converts a balanced audio signal into an unbalanced signal. This is good for sending audio signals from an XLR source to an RCA input, or vice versa. Regardless of direction, the result will be an unbalanced signal..
  • This is a premium quality cable with gold plated connectors at each end. The cable is made with two 16 AWG oxygen-free copper conductors, in a twisted-pair arrangement, and is shielded along the full length with copper braid with 97.5% coverage..
  • This cable uses the standard pinout with pins 1 and 3 of the XLR connector wired to the shield of the RCA plug and pin 2 of the XLR connector wired to the tip of the RCA plug..
  • Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
Check Stock

Beyerdynamic DT-880-PRO-250 Semi Open Studio Reference Monitor Headphones Bundle with Samson QH4 4-Channel Studio/Podcast Monitoring Headphone Amplifier

  • ...4-channel stereo headphone distribution amplifier. Four independent 1/4" stereo headphone channels. Individual volume control on each headphone channel. Two balanced 1/4" input connectors. Stereo 1/8" Aux input and output. Master Mute and Mono-summing switches. Specifications: Inputs: 2 x 1/4" balanced, stereo 1/8" unbalanced TRS. Outputs: 4 x stereo 1/4" unbalanced, stereo 1/8" unbalanced TRS.
  • Controls: Master volume, master Mute, master Mono, 4 x Channel volume. Noise Floor: -114dBu, 22k BW unweighted. Maximum Output: 8.3 dBu, 1% THD+N, loaded 16R. Dynamic Range: 22dB, 22k BW. Frequency Response: 17Hz47kHz (-3dB). Power: 15VDC adapter..
Check Stock

Focal Listen Wireless Circumaural Closed-Back Ear-Cup Portable Headphones with Double Microphone System, Chic Purple

  • Type Circum-aural open-back headphones Impedance 55 Ohms Sensitivity 104dB SPL / 1mW @ 1kHz THD 0,25% @ 1kHz / 100dB SPL Frequency response 5Hz-28kHz Loudspeaker 1.6" (40mm) Aluminum/Magnesium 'M'-shape dome Weight 0.99lb / 450g Cables provided 16.5ft (5m) unbalanced coiled cable (01 /4" TRS Jack) 3.9ft (1.2m) unbalanced cable (01/8" TRS Jack) 3.5 mm to 6.35 mm jack adapter Spare cushions 2 spare cushions provided Hard-shell carrying case provided 9.8"x9.4"x4.7" (250x240x120mm).
Check Stock

Kopul HMX-2 Humbuster - Dual-Channel Hum Eliminator with XLR and 1/4 Connectors

  • Eliminates 60 Hz Ground Loops * Silences Unbalanced Cable Buzz and Hum * Can Be Used as DI Box.
  • Preserves Signal Integrity * Converts Balanced and Unbalanced Signals * Works with 1/4" and XLR Connectors.
  • +4 dBu or -10 dBv * Fully Passive Design * No External Power Required.
Check Stock

9 Inch Long 1/4 Inch Stereo TRS Female to 2 X 1/4 Inch Male Mono Y Splitter Cable

  • Tisino 1/8” Stereo to Dual 1/4“ Mono Cable, this cable is designed to connecting your smartphone, portable media player, laptop/PC or similar device with a 3.5mm mini jack output to a device with 2 x 6.35 mm jack inputs such as speakers, mixing console and so on..
  • This cable can be used to split a 3.5mm unbalanced stereo signal into two 1/4" TS(left/right) unbalanced mono signals, or to combine two 1/4" mono signals(left/right) into a single 3.5mm stereo signal. It splits closer to the 1/4 TS ends, the distance to the split point is about 19.8 inches(50 cm)..
  • 20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity. a great choice for music lovers..
  • With Heavy Duty 24K gold-plated 6.35 mm and 3.5 mm connectors, it could eliminate signal loss and static noise, provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality..
  • Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm(0.24 inch), Top quality and made by environment-friendly material, Polyethylene insulation improves high-frequency response, is strong, flexible, and durable..
Check Stock

Monoprice XLR Female to RCA Male Cable - 15 Feet - Black With E21Gold Plated Connectors | 16AWG Shielded Twisted Pair Oxygen-Free Copper Braid Conductors - Premier Series

  • An XLR to RCA cable converts a balanced audio signal into an unbalanced signal..
  • This is good for sending audio signals from an XLR source to an RCA input, or vice versa. Regardless of direction, the result will be an unbalanced signal..
  • The cable is made with two 16 AWG oxygen-free copper conductors, in a twisted-pair arrangement, and is shielded along the full length with copper braid with 97.5% coverage..
  • This cable uses the standard pinout with pins 1 and 3 of the XLR connector wired to the shield of the RCA plug and pin 2 of the XLR connector wired to the tip of the RCA plug..
Check Stock

tisino 3.5mm to XLR Balanced Cable Adapter, Gold-Plated 1/8 inch Mini Jack Aux to XLR Male Mono Audio Cord for Cell Phone, Laptop, Speaker, Mixer - 1ft

  • BALANCED XLR male to 3.5mm stereo TRS cable is commonly used on a cell phone, MP3 player, tablet, laptop, or any 3.5mm audio output to a mixing console or powered speakers..
  • This is a balanced cable, the tip and ring have continuity with pins 2 and 3 respectively. This is NOT an unbalanced Mono cable, nor is it a stereo cable. this cable carries an unbalanced stereo signal into balanced mono input. NOTE: It would work fine for a mono balanced 1/8 line to xlr, if it works at a stereo source to the mono mic input, there requires some sort of summer/transformer or a balance receiver and transmitter..
  • 20 AWG 4N Oxygen Free Copper with shielding ensure high fidelity sound quality and provide maximum conductivity and signal clarity.great choice for music lover.
  • With Heavy Duty 24K Gold-plated XLR and 3.5 mm connectors, it could eliminate signal loss and static noise,provide durability and improve the signal transmission, and the copper shell blocks any interference which prevents the loss of sound quality.
  • Heavy Duty Flexible Rubber and Nylon Braid Jacket Protect Your Cable, the outer diameter of the cable is 6.0mm(0.24 inch),Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response,strong, flexible and dur....
Check Stock

Monoprice XLR Male to RCA Male Cable - 6 Feet - Black With E21Gold Plated Connectors | 16AWG Shielded Twisted Pair Oxygen-Free Copper Braid Conductors - Premier Series, 104777

  • Buy with confidence: with Monoprice lifetime on all cables, you can rest assured we stand behind our products and our customer.
  • An XLR to RCA cable converts a balanced Audio signal into an unbalanced signal..
  • This is good for sending Audio signals from an XLR source to an RCA input, or vice versa. Regardless of direction, The result will be an unbalanced signal..
  • The cable is made with two 16 AWG Oxygen-Free Copper conductors, in a twisted-pair arrangement, and is shielded along the full length with copper braid with 97. 5% coverage..
  • This cable uses the standard pinout with pins 1 and 3 of the XLR connector wired to the shield of the RCA Plug and pin 2 of the XLR connector wired to the tip of the RCA Plug..
Check Stock

TISINO 3.5mm to XLR Cable Unbalanced Mini Jack 1/8 inch to XLR Male Adapter Microphone Cord - 3.3ft/1m

  • Unbalanced 3.5mm(1/8 inch) to XLR Cable connects a Cell phone, MP3 player, tablet, laptop, voice recorder, or any 3.5mm audio output to a mixing console or powered speakers.
  • Connect a smartphone with a headphone jack to XLR input.
  • Connect a tablet using an instrument App into a mixing console for a performance. (Note: it is used for aux out to xlr in, can not run this cable from an xlr out to a mic in).
  • This XLR male to 3.5mm cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram).
  • XLR male connector has molded strain relief to support the weight of the cable.
  • 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports..
  • 20 AWG 4N OFC Wire, High Density Shielding and Al-foil Shielded to Prevent EMI/RFI Interference ensuring the highest quality audio transfer without static, or popping..
  • Heavy Duty Flexible Soft Rubber Jacket provided maximum flexibili....
Check Stock

TISINO 3.5mm to XLR Cable Unbalanced Mini Jack 1/8 inch to XLR Male Adapter Microphone Cord - 1.6ft/50cm

  • Unbalanced 3.5mm(1/8 inch) to XLR Cable connects a Cell phone, MP3 player, tablet, laptop, voice recorder, or any 3.5mm audio output to a mixing console or powered speakers.
  • Connect a smartphone with a headphone jack to XLR input.
  • Connect a tablet using an instrument App into a mixing console for a performance. (Note: it is used for aux out to xlr in, can not run this cable from an xlr out to a mic in).
  • This XLR male to 3.5mm cable combines the left and right stereo signal from a source with 3.5mm stereo output to a single mono feed, This is an Unbalanced cable, the L and R channels are soldered together making a mono signal to XLR Pin 2, the XLR Pin 1 and Pin 3 are shorted to ground, it is not suitable for most "balanced" applications.(Please See Diagram).
  • XLR male connector has molded strain relief to support the weight of the cable.
  • 24k Gold-plated 3.5mm TRS connector has 360 degree easy-grip treads for frequent unplugging and durability, the step-down design of the 3.5mm connector provides connection to recessed ports..
  • 20 AWG 4N OFC Wire, High Density Shielding and Al-foil Shielded to Prevent EMI/RFI Interference ensuring the highest quality audio transfer without static, or popping..
  • Heavy Duty Flexible Soft Rubber Jacket provided maximum flexibili....
Check Stock

DISINO 1/8 Inch TRS Stereo to Dual 1/4 inch TS Mono Y-Splitter Cable 3.5mm Aux Mini Jack Stereo Breakout Cable Path Cords - 3 feet

  • Disino 3.5mm trs to dual 1/4 ts cable, this cable is designed to connecting your smartphone, portable media player, laptop/PC or similar device with a 3.5mm mini jack output to a device with 2 x 6.35mm jack inputs such as speakers, mixing console and so on..
  • This cable can be used to split an 3.5mm unbalanced stereo signal into two 1/4" TS(left/right) unbalanced mono signals, or to combine two 1/4" mono signals(left/right) into a single 3.5mm stereo signal. It splits closer to the 1/4 TS ends, the distance to the split point is about 7.5 inches..
  • Heavy Duty Gold-plated connectors resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss..
  • Heavy Duty Flexible Rubber Jacket, Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response..
Check Stock