Categories

Best Under Water Plasma Cutting

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

  • 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
  • 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
  • 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
  • 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
  • Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
  • ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
  • 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....
Check Stock

Reboot Plasma Cutter 45 Amp IGBT Inverter RBC4500 AC 220V Air Plasma Cutting 1/2 Clean Cut 15MM Max Cutting High-Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron

  • [Cutting Thickness] Plasma Cutter 20-45A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V,air pressure 60PSI....
  • [Blowing Back] Plasma cutting Torch Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and....
  • [Generator Supported] this plasma cutter 45amp works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V.
  • [Wildely Application and Low Cost] this plasma cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • [Warranty] buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local....
Check Stock

Warfox Plasma Cutter 120/240V Dual Voltage Plasma Cutting Machine, Max Cutting Thickness 14mm, Clean Cutting Thickness 10mm in 65PSI (CUT50D 120/240V)

  • Plasma Cutter, 120V/240V 50A plasma cutter with IGBT inverter technology, long life and efficient higher than mosfet machine. IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • Plasma cutting machine has current display function and air post time adjustment. Adjustment range is 2-20S, users can adjust the time for post air, effectively providing cooling,extend consumable's working life.
  • Max cutting thickness 14mm ,10mm quality cutting thickness in 240v@65PSI 50A.
  • Under 120V, it is 35Amps.Quality cutting thickness is 8mm, Severance cutting thickness is 12mm.
  • Accessories included:4M PT31 cutting torch, 2.5M Earth clamp,5pcs tips, 5pcs electrodes, 2 meters air hose, 4pcs hose clamp, 1adaptor, 1 manual.Air regulator,air filter,air gauge are fixed at machine.
  • The cutting machine can cut carbon steel, stainless steel, steel and other materials. It is an indispensable machine in your tool room.
Check Stock

Mophorn 50Amp Plasma Cutter, 110 220V Dual Voltage Plasma Cutting Machine, Max 12MM Thickness Clean Cut, Portable Plasma Cutting Machine IGBT Inverter Digital Plasma Cutting Equipment

  • Powerful Air Plasma Cutter: The Cut-50F plasma cutter can easily cut up to 1/2’’(12.7 mm) metal under maximum output with ultimate portability weighing only 22.7lbs..
  • Compact & Portable: The inverter plasma cutter has a handle and a thoughtful torch design that can provide a sure, comfortable grip, making the whole machine easy to take..
  • High Efficiency & Energy Saving: The cutting machine adopts the inverter technical of switch power, greatly reducing the dimensions and weight of the main transformer. The energy-saving can reach up to 50% as well as efficiency is increased by 30%..
  • Dual Voltage: The ability of the dual voltage allows the plasma cutter to operate at 110V or 220V, with a power of 60HZ. The plasma cutter has the function to supply gas ahead and turn off gas delayed. High cutting speed and cutting smoothly..
  • Wide Application: This plasma cutter can be widely used at automotive, ducting work, repair & maintenance, metal processing, manufacture, site work etc..
Check Stock

Thermal Dynamics Cutmaster 42 40 Amp Tip 9-0094, 5 pack

  • 22pcs plasma cutting consumables can fit for Thermal Dynamics CutMaster 42 Plasma Cutter SL40 Torch (Torch Ref. Code 7-0040).
  • 10pcs Plasma Cutting Electrode,ref code 9-0096.
  • 10pcs Plasma Cutting Plasma Cutting Drag Tip, ref code 9-0094, cutting current is 40A.
  • 1pc adapter sleeve, ref code is 7-2915 and 1pc standoff guide ref code is 9-8251.
  • PLAXCON OEMed Plasma Cutting Torch Consumables which fit for thermal dynamics SL40 torch , not original.
Check Stock

FLARING Plasma Cutter Equipment 50 AMP 220V IGBT 1/2'' Clean Cut CUT50 Max 3/5‘’ Cut High Frequency Inverter Plasma Cutting Machine for Car Frame,Carbon Steel,Stainless Steel,Thin Copper,Aluminum

  • [Cutting Ability] This plasma cutter machine automatic 220v(50/60hz),10-50A dc output, 1/2″(12mm) ideal clean cut and 3/5″(15mm) maximum severance cut under 220v,70% duty cycle. The upgraded model only supports 220v voltage input..
  • [Cutting Material] Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper,cast iron,chrome and aluminum(Aluminum≤1/4″,Copper≤1/5″).
  • [Breaker Recommendation] We suggest a 30A breaker on 220V while using this plasma cutter.Air Pressure 60-70PSI suggested.Btw,this CUT50 plasma cutting machine works well with a generator above 5000W..
  • [Fan-Runs-on-Demand cooling system]The new machine uses powerful cooling system, “dormant” fan,only operates when needed. This cuts down on fan noise, along with reducing power consumption and contaminants drawn into the machine..
  • [Warranty Assurance] We are a manufactory with over 10 years’ experience of professionals producing the plasma cutter machines,3 year’s warranty.Please add to cart and take it without hesitation.
Check Stock

PT-60 Torch Electrode Contact Tip Retaining Cap Drag Shield Cap Plasma Cutting Consumables 21pcs

  • 21pcs Plasma cutting consumables kits: 5pcs electrode + 10pcs nozzle / tip + 1pc retaining cap + 5pc shield cap.
  • The plasma arc cutting consumables kits fit PT-60 / PT60 / PT-40 plasma cutting torch ,fit LTP5500 Plasma Cutter Consumables.
  • WS OEMed Plasma Arc Cutting Torch Consumables, not originalPlasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
  • Plasma tip / nozzle diameter: 0.9mm / 0.035in,cutting current :30-40A.
Check Stock

Reboot Plasma Cutter Machine 50Amp Plasma Cutting Equipment CUT50D 3/5'' Cut 110/220V High Frequency 1/2'' Clean Cut,IGBT Air Plasma Cutting Machine for Aluminum Alloy Mild Steel Cast Iron

  • [Widely Application and Low Cost] 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation.this Plasma Cutter available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work, repair/maintenance,metal processing,manufacture.
  • [SEE WHAT OUR CUSTOMER SAYS] I tried it on 120v with the air pressure turned way down on a piece of 1/8 angle iron the pilot arc worked as it should and it went through it like it wasn't even there. Next thing I tried it on was some roughly 3/8 wall tubing I needed to cut and notch for the safety cage on my figure 8 car..
  • [Generator Supported] This Plasma Cutting machine works well with a generator,but we suggest a 5000W above generator and 30A breaker needed for 220V,50A breaker for 110V.
  • [Blowing Back] Pre-made 3 seconds of blowing time after you release the torch,to cool down the torch head and consumables.[110/220V Input ]Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz).
  • [Warranty] Buy this plasma cutter with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.
Check Stock

SPELAB 2.5 Inch Stainless Steel Exhaust Pipe Kit

  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33".
Check Stock

Plasma Cutter Table - Water table for hand held plasma cutters - w/Slats

  • Water catches plasma cutting stream without splashing back.
  • Quick release clamp holds work, guide, straight edge and our Plasma Stencils.
  • Great for portable, temporary and/or permanent use.
Check Stock

W.S SL40 Consumables Kit Electrode Tip Standoff for Thermal Dynamics Cutmaster 42 Plasma Cutter Torch 9-0093 9-0096 9-8251 QTY-22 Copper

  • 22pcs plasma cutting consumables can fit for Thermal Dynamics CutMaster 42 Plasma Cutter SL40 Torch Consumables.
  • 10pcs Plasma Cutting Electrode,ref code 9-0096.
  • 10pcs Plasma Cutting Plasma Cutting Drag Tip, ref code 9-0093, cutting current is 40A.
  • 1pc adapter sleeve, ref code is 7-2915 and 1pc standoff guide ref code is 9-8251.
  • PLAXCON OEMed Plasma Cutting Torch Consumables which fit for thermal dynamics SL40 torch , not original.
Check Stock

LOTOS LT5000D 50A Air Inverter Plasma Cutter Dual Voltage 110/220VAC 1/2\ Clean Cut

  • ★ AIR PLASMA CUTTER: SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum..
  • ★ OUTPUT & PERFORMANCE: 10-50 Amp DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC)★ DUAL VOLTAGE INPUT: Automatic Dual Voltage / Dual Frequency (110/120 V 220/240 V 50/60Hz)..
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website..
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LT5000D Plasma Cutter are "LCS22" or "LCS33". Please search "Lotos LCS22" or "Lotos LCS33".
  • ★ It CANNOT compatible with Lotos LCOn20, LCON40 or LCON90 Consumables Sets or any other third part consumables set. ★ PACKAGE INCLUDES: Power supply, Plasma cutting torch, ground clamp, Pr....
Check Stock

PrimeWeld Plasma Cutting Table with Replaceable Slats, Plasma Cutter Table, Cutting Equipment, 32" H x 21" W x 30" L

  • Plasma Cutting Solution - The PrimeWeld Plasma Cutting Table offers you an industrial solution to a problem that most face when trying to cut material with their plasma cutter or gas torch. Using this table you can lay your workpiece over the support slats and make cuts with your plasma cutter or gas torch and not worry about what to use to support the back side of the material..
  • Sturdy, Carbon Steel Construction - The 250 pound capacity allows you to plasma cut or weld heavy plate steel. As an extra safety feature, the slag catch tray helps you to not worry about pieces falling to the floor..
  • Work At The Right Height - This slatted-top, steel cutting table is the place to support your workpiece while plasma cutting or welding. The dimensions are 32"H x 21"W x 30" L and are designed to let you cut and work at the perfect height..
  • Replaceable Slats - The PrimeWeld Plasma Cutting Table comes with 23 replaceable slats. The slat support spacing allows arcs and sparks from your welder or plasma cutter to penetrate the steel..
Check Stock