Categories

Best Universal Hitch Bumper Guard

Bully BBS-1104L Black Bull Series Steel Universal Fit Truck LED Brake Light Hitch Step Fits 1.25" and 2" Hitch Receivers for Trucks from Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM, Jeep

  • Bump Step: It Is Widely Used To Gain Easy Access To The Truck Bed, Luggage Racks, Or Rear Cargo Area Of A Vehicle. Hitch Steps Double-Up As Bumper Guards And Can Protect Against Damage From Low Impact Rear-End Collisions.
  • Durable Construction: The Sturdy Hitch Step Is Manufactured Using 16-Gauge Steel To Withstand Extreme Compressions. The Non-Slip, High-Impact Rubber Step Pad Adds To The Overall Strength Of The Access Step.
  • Easy Installation: Use Of A Plug-And-Play Wire Harness Helps With Quick, Effortless Installation. Once Installed, The Rubber Pad Of The Multi-Purpose Utility Step Ensures Users Get A Secure, Comfortable Footing At All Times.
  • Universal Fit: The Utility Bumper Guard Is Designed To Fit Standard 2In. And 1 ¼ In. Hitch Mounts. This Bumper Guard Is Suitable To For Most Common-Sized Hitch Receivers.
Check Stock

Juegoal Rear Bumper Protector, Vehicles Bumper Guard Hitch Step with Pin Lock and Stabilizer for Car and SUV

  • Universal: Bump step can be mounted to any vehicle with a standard 2 in. Receiver trailer hitch. (Bonus Pin Lock and Stabilizer which are value $8) Can be used as a step to reach the roof of the vehicle or to defend the bumper against rear end accidents, dents and scratches..
  • Useful Essential: Juegoal rear bumper guard is great option worth the buck, it is quite convenient for use at the parking area. It does not eat up extra space by protruding above the bumper..
  • Solid Construction: The premium quality material used in the construction further makes it extremely durable and sufficiently long-lasting. Of course, it offers all-weather protection for your car's bumper..
  • Convenient Size: This rear bumper guard comes in a convenient size which allows it to occupy the entire rear section of the bumper securing it from any form of scratches or damages. It does not sag, curl, flip or bend regardless of the pressure or impact it is subjected to..
  • With impact absorption zones, it eliminates chances of damage to the car's bumper. In case a taller vehicle backs into your car, you won't have to worry since this bumper guard is specially designed to take care of that..
Check Stock

Nilight Hitch Step with 2\ Hitch Receiver Rear Bumper Guard Protector Compatible with Car Truck Vehicles Upgraded Textured Black Hitch Step Bar with Hitch Lock & U-Bolts Stabilize,2 Years Warranty

  • UNIVERSAL FITMENT：Fits on Car/Truck/Vehicles with 2 inch hitch receiver. Weight Capacity: 350 LBS.
  • USER-FRIENDLY DESIGN：With slip-proof design and free pin lock & stabilizer included.Nilight hitch step bar provides a secure and comfortable step for you.
  • STURDY AND TOUGH：This bumper guard procter is made with heavy-duty 2 inch diameter and 0.120inch wall thickness tubes, Dual stage powder coated textured black finish.
  • EASY DIY INSTALLATION： No drilling required. Easy plug in installation.It not only makes your vehicle look tougher but it also protects your vehicle from rear end collisions.
  • PACKAGE INCLUD : Hitch Step and Hitch Lock and U-Bolts.
Check Stock

MaxxHaul 50173 Hitch 2" x 2" Receiver Adapter for RV Bumper

  • MaxxHaul Hitch Receiver Adapter instantly provide a 2" x 2" receiver for RV bumper and has a 200-lb tongue weight capacity.
  • This hitch receiver is designed for RV bumpers with 4"- 4. 5" square bumpers.
  • Universal Design - Is compatible and accept hitch mount accessories with 2" shank such as bike racks, RV tire carriers, hitch step and other accessories..
  • Durable & Rust Resistant - Made from heavy duty all steel construction and weighs less than 10 lbs. with rugged powder coat finish to resist rust and corrossion.
  • Easy Installation - quickly installs on your RV bumper.
Check Stock

RV Bumper Hitch Receiver 2 inch Adapter Receiver Fits for 4 x 4 inches Square Bumper Beam Level Trailer Towing Purpose

  • Upgrade the design: Universal, applicable to different width and height of the steel beam, the most important thing is that according to the diferent steel beam, has the adjustment function, can tightly lock the steel beam does not shake ! Patented products, please do not imitate !!.
  • VERSATILE DESIGN:The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 4” x 4” bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools..
  • PACKAGE: Camper RV bumper hitch, Instructions, 4 bolts included for Mounting hardware..
Check Stock

License Plate Bumper Guard with Screws and Protector Rubbers, 2.3 Inches Thick Rubber License Plate Frame Protects Bumper Fits Universal Car, Truck, SUV, RV and Van

  • Comprehensive protection for license plate: this rubber license plate frame protector is made of heavy-duty rubber material and with 2.3 inches thickness, can protect your car from bumper depression and scratches at rear-end collision or other accidents.
  • More practical than steel: compared with steel bumper guard, the rubber guard is not easy to fray or rust, and won't cause hurt to your precious car, easier to assemble and safe to use.
  • Bumper protector rubbers: this car bumper protector rubber uses quality double-sided glue that won't fall easily and it can be firmly adhered to your car.
  • Universal fit for bumper guard for license plate: with stylish and universal design, this license plate bumper guard fits for any US "standard" license plate.
  • Improve your front bumper protection with this jet-black license plate holder and bumper protector.
  • It has great look and practical function.
  • What you get: you will get 1 x license plate bumper guard, all hardware for installation, 2 x protector rubbers.
  • If you have any other questions on this product, don't hesitate to contact us.
Check Stock

Samman Hitch Step with Red Brake Light, Towing Hitch Step for 2'' Standard Receiver Heavy Duty Metal Construction Hitch Mount Compatible with Jeep Chevrolet Ford Toyota GMC Dodge RAM

  • ?Universal fits for 2 inch Receivers:?Hitch step is customized for standard 2in receiver, compatible with Chevy, Ford, Toyota, GMC, Dodge RAM, Jeep.
  • ?Sturdy and Protects:?Sammanlight hitch step is crafted from sturdy heavy duty metal with black powder coat finish, which is protect the hitch mount from rust and corrosive. It makes a nice addition to your vehicle, adding a little something to the overall appearance of your vehicle, also prevent your bumper from damaging when someone parking behind your vehicle.
  • ?Non-slip Plastic Cover:?Truck hitch step with plastic cover, providing non-slip support.
  • ?Extra Safety on the Road?With 6W, 480LMs LED stop red light on back of the hitch bumper, it for an extra security keeping the drivers behind you little more alert (Red wire for positive, Black wire for Negative).
  • ?Easy Installation:?plug-and-play, simply take it out of the box and slide it right into your 2 inch receiver on your hitch. (NOTE: package not including the hitch pin).
  • Compatible with vehicle type: Compatible with Truck, Pickup, SUV, Chevrolet, Ford, Toyota, GMC, Dodge RAM, Jeep with 2 inch Receivers.
Check Stock

CURT 19030 Step Bumper Hitch Receiver, 2-Inch, 5,000 lbs.

  • EASY TO INSTALL. This bumper hitch can be used on a wide variety of trucks and SUVs, featuring slotted mounting holes spaced 8-1/2 inches apart, on-center. This trailer hitch receiver is designed to bolt onto the bottom of the truck's step bumper.
  • DEPENDABLE STRENGTH. This step bumper hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. For a wide variety of towing options, this bumper hitch receiver equips your truck with a standard 2-inch x 2-inch hitch receiver. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. This bumper mount hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This hitch bumper receiver is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV rays.
Check Stock

Hooke Road Cherokee XJ Metal Front Bumper and Rear Bumper Combo Compatible with Jeep Cherokee XJ 1984-2001

  • FITMENT: Full Width Front and Rear Bumper Kit Compatible with Jeep Cherokee XJ 1984-2001 Models. Moderate installation needs minor cutting to install front bumper...
  • DESIGN: The front bumper Integrated grille guard hoop provides superior protection..
  • EXTEA LIGHTING: 2×18W LED spotlights and 2×18W LED floodlights included..
  • CORROSION RESISTANCE: The bumpers were made of heavy duty 9-gauge(5/32 inch) steel. Textured black powder coat finished. Premium E-coating process for 5-year corrosion protection under normal use..
  • FOR OFFROAD: Front bumper has built-in winch plate for up to 12000 lbs use. Rear bumper has 2" standard hitch receiver. Include 4 D-rings and D-Ring isolators..
Check Stock

Rear 2’’ Receiver Trailer Tow Hitch Step Bar Bumper Guard W/Led Brake Light For Truck Suv Van

  • Precision designed to match your vehicle’s body lines. Trailer hitch step bar are a great addition to any truck, suv, or van. They can protect the vulnerable, molded bumpers in the event of a collision.
  • Solid all-welded construction for maximum strength and safety. High quality steel constructions,they come prepped with advanced powder coating. Rust protection. Built to strict quality control standards.
  • Rear hitch drop step bar bumper guard is waterproof and shock-resistant. Able to withstand road abuse & heavy duty towing purposes to it's specified capacities.
  • Quick installation,easy bolt-on. No cutting and no drilling. Bolts and instruction are not included.
  • 350 Lbs Weight Capacity,32.5" Long Bar. 2.25" diameter square Bar. Fits 2" Receivers. Package Include: 1 X Trailer Hitch Step Bar(W/Led Brake Light).
Check Stock

T-Rex Bumper Protector, Rear Bumper Guard for Cars

  • Universal fit: this bumper guard fits any car small and large.
  • Quality material: made of high density durable and all weather foam material that is only 1/4 of a inch thick and enough to protect your bumper from dings dents and scratches when you park the car.
  • Easy handling: lightweight (only 1.5 lb.) this bumper guard can be installed in a breath.
  • 360 degree protection: extra wide (72 inches) the bumper protector also curves around the corners.
  • Secured in place: with the 2 Velcro straps the bumper security attaches right on the carpet of your trunk, and adjustable straps. Works the same with or without the side straps.
Check Stock

BumperSafe - Front/Rear Bumper Protector/Bumper Guard for Cars

  • ✔#1 AMAZON'S CHOICE. Buy with confidence!.
  • ✔ULTIMATE PROTECTION - Our bumper protector / bumper guard will protect your bumpers from expensive scratches, dents, and dings at an affordable price! Avoid anything less that will lead to expensive body repairs. We know the feeling..
  • ✔ALL WEATHER - Made out of STRONG all weather foam material for use in rain, snow, or sunshine!.
  • ✔UNIVERSAL - Fully adjustable straps to fit most Cars and SUVs on the road! All brands A-Z are 99% compatible with our bumper guard!.
  • ✔WIDER IS BETTER - BumperSafe measures 72" wide protecting your bumper from corner to corner. Other products forget about the corners and only protect the middle of your bumper leaving the rest exposed to potential damages. Don't let this happen to you!.
Check Stock

SLIPLO Ultra Universal Front Bumper Scrape Guard Skid Plate Bumper Protection for Lowered Cars, Carbon Fiber Splitters and Aftermarket Bumper Lips, Anti-Scratch DIY Bumper Protector Kit v2

  • ... helping to minimize abrasion during impact..
  • ✅【 UPGRADED NEW VERSION 2 】In this upgraded version of our high-performance bumper scrape guard, we have made additional enhancements, on top of all the high features of the previous version to improve the ease of installation, effectiveness and performance of this universal bumper protector, which will give you a more pleasing and satisfying experience..
  • ✅【 ENHANCED DESIGN 】 Features a newly modified size and thickness of our front splitter protector for easier & more effective installation, it will minimize the trimming of each piece and will reduces the chance of adhesive failure with extreme compound curves. It will also allow for a discreet lower-profile factory look while providing the same level of protection as our previous model..
  • ✅【 NEW 3M ADHESIVE WITH BUILT IN PROMOTER SYSTEM 】 Our front bumper guard comes with pre-attached 3M full black double-sided tape with extraordinary strength and durability to ensure perfect sealing and bonding even in extreme environments (No drilling or screws are required). This heavy-duty Acrylic mounting tape includes its own built-in adhesive promoter technology which will eliminates the need to pretreat the surface with adhesive promoter saving you....
Check Stock