Categories

Best Upcycled Material Filament

Myra Bags Vintage Upcycled Canvas Messenger Bag S-0711

  • {Lightweight Canvas Purse} Introducing Myra Women's Vintage Upcycled Canvas Messenger Bag, a stylish and practical addition to any woman's wardrobe. This bag is expertly crafted from durable canvas fabric, with a charming combination of grey and brown color scheme and a cool Vintage print. This awesome bag features premium leather trim and is finished with high-quality canvas lining and it's sure to become your next favorite!.
  • {Perfect for Day or Weekend Trips} Looking for a stylish and spacious messenger bag that will keep you organized on the go? Look no further than Myra Women's Vintage Upcycled Canvas Messenger Bag. This durably constructed bag features two exterior pockets perfect for stowing your essentials while on the move. Whether you're headed out for a day trip or a weekend getaway, this bag is perfect for you. Dimensions: 17" Width x 14" Height x 4" Depth with a 7" handle drop and a 15" adjustable strap.
  • {Hand-Crafted Quality} We follow a specific process in the creation of our upcycled canvas purses and messenger bags which includes material selection, washing, cutting, assembling, sewing, and finishing before our leather-trimmed womenÍs canvas bags pass several quality standard checks. Each bag is uniquely crafted and has its own charact....
Check Stock

3-Pack 1.75mm 3D Filament Detection Module Run-Out Pause Detecting Monitor Filament Sensor for Ender 3 Pro CR-10 3D Printer and Lerdge Board

  • ... detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing..
  • The inlet port/outlet port of the material detection module are changed from the original metal copper sleeve to the rotating funnel opening design, which optimizes the resistance of the feeding material, makes the feeding smoother and eliminates the material/filament, and avoids the phenomenon of filament stucking and planing..
  • The arrow direction of the inlet position is silk screen, which is convenient for distinguishing the direction of the inlet and the outlet..
  • Used with Lerdge board: When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print. Wiring: Connect the module to the M-sensor port on the motherboard..
  • Used with other motherboards: The material detection module uses the level transition detection method. When with material in, the detection level signal should be ....
Check Stock

Monoprice - 112504 Premium 3D Printer Filament 1.75MM 0.1kg/spool - Cleaning Filament - Compatible With Almost All 3D Printers And 3D Pens

  • Keep the nozzles and extruders on your 3D printer printing like new using this 1.75mm Cleaning Filament from Monoprice!.
  • It is a good idea to periodically clean the nozzles and extruders on your 3D printer to ensure that they feed filament smoothly and evenly..
  • It is also good to clean when switching filament colors or material types..
  • This cleaning filament is designed to adhere to any stray material left in the nozzle and remove it along with the cleaning filament.
  • To clean using this filament, simply print about 12" of material. It prints at a wide 160 ~ 260C temperature range.
Check Stock

BIQU Filament Break Detection Sensor Module 3D Printer Accessories with 1M Cable for 1.75mm Filament Extruder Material Run-Out Detector for 3D Printer (Transparent)

  • ❤【Function of Filament Detection Module】 To detect Filament in 3D printer run-out,pause detection,it automatically stops the 3D Printer when the filament runs out.Optimize the inlet port/outlet port of the material detection module, to reduce the resistance of the feeding material..
  • ❤【Filament Break Detection Module】When there is material, the level signal of the detection port should be high level. When there is no material, the level signal of the material port goes low, and the system detects one. If the high-to-low transition is determined, the material is considered exhausted and a pause command is executed..
  • ❤【Detection Method】The material detection module uses the level jump detection method..
  • ❤【Filament Size】 It Suitable for 1.75mm Filament with 1m cable which making your printing work goes smooth and relieved..
  • ❤ 【After-Sales Guarantee】We support high quality after-sales Service,any questions or feedback please contact us,no matter what refund or resend. We will satisfy with your request..
Check Stock

Inland Glass PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Transparent Glass Filaments, Yellow Glass

  • ...bble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY GLASS PLA: Glass PLA filament is non-toxic, the material has good toughness and strength. This material has a low shrinkage rate, and a uniform diameter for clean, even prints. You can expect a transparent print with Glass PLA..
Check Stock

AMOLEN Filament Storage Bag Vacuum Kit with Two Sizes - 51 PCS Cleaning Drying Sealed 25 Bags for 3D Printer Filament with Desiccants/Humidity Indicator Cards/Clips/Hand Pump

  • ... Storage Bags Set come with one Package Box, Vacuum Bags *20 (11.8×13.4inch for 1kg spool), Vacuum Bags *5 (12.6×17.7inch for two 1kg spool), Hand Pump *1, Sealing Clips*5, Humidity Indicator*15, Desiccant*5. One kit 51 PCS in total, which can satisfy to storage 30 used filaments at the same time..
  • 【High Quality Material】- AMOLEN Filament Vacuum Bags made of Food-grade PE+PA Composite Material, BPA-free storage bag is safe, 0.09 mm Thickened Material, durable and recyclable.
  • especially designed for 3D printer filament, also for food storage or others..
  • 【Moisture & Dust-proof】- The Filament Storage Vacuum Bags apply Double Seal Zipper and single side embossed design which are Moisture-proof and dust-proof to ensure the printing quality of consumables. Microporous design of vacuum bags which can fastly drain air within 30s to ensure sealing better than others..
  • 【Widely Compatibility with Two sizes Bags】- AMOLEN Filament Storage vacuum bags with two size are especially designed for 3D printing filament and is compatible for all 0.5KG/0.75KG/1KG filaments and 1.75mm/2.85mm/3mm filament.The big size bag satisfy to storage two 1 kg spool once. It can also used for food or other material storage..
  • 【Vacuum Bag & After-sales Service】- Vacuum pac....
Check Stock

Zeberoxyz 3D Printer Filament Holder with Adjustable 26-126mm Filament Mount Rack Bracket Fits for TPU/PLA/ABS/Nylon 0.5-3KG 3D Printing Material(Holder for 0.5-3kg Filament)

  • The width can be adjusted (about 26mm-126mm/1.02inch-4.96inch) to adapt to different filament reels.
  • The range of the material rack can be adjusted according to the size of its filament, which is more flexible.
  • Material: 3D Printer Filament Holder made of high quality Metal and Plastic, stable, durable, fine workmanship.
  • Stable and durable foot pads increase stability and prevent the bracket from moving during work.
  • The material draws and slides smoothly to avoid jamming and winding of the spool.
  • Widely Used for 0.5KG 1KG 3KG PLA ABS 1.75mm 3.0mm all 3d printer filament.
  • Package Content: 1Kit 3D Printer Filament Holder, 2PCS M4 T-nuts, 2PCS M4x6mm Screws, 1PCS Allen Key.
  • The Filament in the image are only used with the photo scene, the actual shipping products do not contain Filament, please note, thank you.
Check Stock

SUNLU Filament Dryer, 3D Printer Filament Storage Box, 360° Surround Heating, Touch Screen, Humidity Detection, Dryer Box for Nylon PA ABS PETG PLA Filament 1.75/2.85/3.00mm, FilaDryer S2, Black

  • ①【Importance of Filament Dryer】Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament..
  • ②【Keep Filament Dry During Printing】The filament dryer can be used as a filament spool holder, so filaments can be dried during 3D printing, it can improves print quality. If the 3D printer is in basement or orther humid place, it's more important to keep filament dry..
  • ③【Bring Damp Filament Back to Live】Filaments that have been stored for a long time may have absorbed a lot of moisture, filament dryer is specifically made for drying 3d printer filament, it can effectively remove excess moisture to save the old filament..
  • ④【Fast Heating and Even Drying】SUNLU filament dryer can heat up to preset temperature quickly, the built-in spindle keeps the filament spinning continuously, heating evenly. Adjustable drying time range: 0-99 hours, adjustable drying temperature range: 35-70 ℃..
  • ⑤【Very Simple but Very Effective】SUNLU filament dryer is very easy to use, FilaDryer S2 is equipped with a large touch screen, you can set different dry temperatures and dry times for diffe....
Check Stock

AMOLEN 3D Printer Filament Storage Bag Vacuum with Two Sizes - 45 PCS Spool Storage Sealing 12 Bags Dust Proof Humidity Resistant for Keeping Filament Dry

  • 【12 Pack Reusable Two Sizes Vacuum Bags Kit】- Filament Storage Bags Set come with one Package Box, Vacuum Bags *10 (11.8x13.4inch for 1kg spool),....
  • 【High Quality Material】- AMOLEN Filament Vacuum Bags made of Food-grade PE+PA Composite Material, BPA-free storage bag is safe, 0.09 mm Thickened....
  • 【Moisture & Dust-proof】- The Filament Storage Vacuum Bags apply Double Seal Zipper and single side embossed design which are Moisture-proof and....
  • 【Widely Compatibility with Two sizes Bags】- AMOLEN Filament vacuum bags with two size are especially designed for 3D printing filament and is....
  • 【Vacuum Bag & After-sales Service】- Vacuum packaging with desiccant to keep your filament dry and keep out dust, enable filament much smoother and....
Check Stock

Creality Ender Series- PLA 3D Printer Filament 1.75mm, Upgrade Stronger Toughness Printing Consumables, Dimensional Accuracy ± 0.03 mm, 1 KG (2.2 LBS)

  • 【Elongation at Break is Increased by 10%】Creality Ender Series Upgrade Filament, The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughness.
  • 【Consistent Filament Diameter with Small Tolerance】The diameter tolerance of the filament is an important index. The tolerance of 1.75mm Ender- PLA filament is controlled within ±0.03mm, which makes the feeding more smooth and ensures continuous printing. Recommended Extrusion/Nozzle Temperature 195°C – 220°C, Bed 55°C – 60°C for better printing results.
  • 【High Purity Raw Material with Green and Degradable】Extracted from corn grains, raw materials are friendly and healthy. The filament has no irritating smell and can be naturally degraded.
  • 【Smooth Feeding and No Plug】The customized proportioning scheme, Ender- PLA filament has better tensile strength and ductility. Smoother fluidity makes the printing easier without plugging, which realizes the exquisite results. The upgrade raw material makes the model support easier to add and remove without warping.
  • 【Creality Official Brand Worry-free After-sales】Good vacuum packing ensures the filament is dry, easy to store, and use. Whenever....
Check Stock

Creality Ender Series- PLA 3D Printer Filament 1.75mm, Upgrade Stronger Toughness Printing Consumables, Dimensional Accuracy ± 0.03 mm, 1 KG (2.2 LBS)

  • 【Elongation at Break is Increased by 10%】Creality Ender Series Upgrade Filament, The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughness.
  • 【Consistent Filament Diameter with Small Tolerance】The diameter tolerance of the filament is an important index. The tolerance of 1.75mm Ender- PLA filament is controlled within ±0.03mm, which makes the feeding more smooth and ensures continuous printing. Recommended Extrusion/Nozzle Temperature 195°C - 220°C, Bed 55°C - 60°C for better printing results.
  • 【High Purity Raw Material with Green and Degradable】Extracted from corn grains, raw materials are friendly and healthy. The filament has no irritating smell and can be naturally degraded.
  • 【Smooth Feeding and No Plug】The customized proportioning scheme, Ender- PLA filament has better tensile strength and ductility. Smoother fluidity makes the printing easier without plugging, which realizes the exquisite results. The upgrade raw material makes the model support easier to add and remove without warping.
  • 【Creality Official Brand Worry-free After-sales】Good vacuum packing ensures the filament is dry, easy to store, and use. Whenever or ....
Check Stock

XYZPrinting Tough PLA Filament 1.75mm, Dimensional Accuracy +/- 0.02mm, 600g Spool (1.3lbs), 1.75mm, Black

  • 【Toughness Enhanced PLA Filaments】--- Most popular materials used in 3D printing. The perfect filament for both beginner and advanced users. It is the default filament of choice for most extrusion-based 3D printers..
  • 【Risk-Free Material】--- XYZprinting Tough PLA filament is extracted from biocompostable materials such as corn, sugarcane, and other sugar crops. It’s non-toxic: DEHP-Free, Heavy Metal-Free and environmentally friendly 3D material that’s safe for your home, classroom, and business. As a bonus, this also allows the plastic to give off a sweet aroma during printing..
  • 【Accuracy & Consistency】--- XYZprinting Tough PLA filament has strict tolerance. Diameter 1.75mm, dimensional accurcy +/- 0.02mm. produces quality prints with good tensile strength, surface quality, minimal warping and surface finish. It can be printed at a low temperature and does not require a heated bed..
  • 【NFC Chip】--- XYZprinting NFC chip is attached to the filament spool ring and sends pre-set print settings to the 3D printer. This automatically sets up the optimized profile of your material and lets you know how much filament is left..
  • 【Wide Compatibility】--- Create prints with XYZprinting PLA filament it is easy to print with, suitable for fast and l....
Check Stock

Creality Ender Series- PLA 3D Printer Filament 1.75mm Upgrade Stronger Toughness Printing Consumables Dimensional Accuracy ± 0.03 mm 1 KG 2.2 LBS

  • 【Elongation at Break is Increased by 10%】Creality Ender Series Upgrade Filament, The Imported raw material upgrades with stronger toughness. It is....
  • 【Consistent Filament Diameter with Small Tolerance】The diameter tolerance of the filament is an important index. The tolerance of 1.75mm Ender-....
  • 【High Purity Raw Material with Green and Degradable】Extracted from corn grains, raw materials are friendly and healthy. The filament has no....
  • 【Smooth Feeding and No Plug】The customized proportioning scheme, Ender- PLA filament has better tensile strength and ductility. Smoother fluidity....
  • 【Creality Official Brand Worry-free After-sales】Good vacuum packing ensures the filament is dry, easy to store, and use. Whenever or why, when....
Check Stock