ZIP System Liquid-Flash | 29 oz Cartridge | Weather-Resistant | Flashing Sealant
- Creates an air- and water-tight seal that resists harsh elements.
- Permanently flashes and seals building penetrations.
- Compatible with most urethane, silicone and acrylic sealants.
- Quick cure time in as little as 20-40 minutes, depending on conditions.
Check StockCaptain O-Ring (5 Pack) CO2 Internal Pin Valve Seals for Paintball Tanks
- Replace your worn out internal co2 valve seal.
- Molded of high quality, high durometer urethane for a long lasting seal.
- Warrantied for one year by Captain O-Ring LLC.
Check Stock
14 Pieces Door Corner Seal Exterior Door Jamb Frame Seal Door Draft Stopper with Adhesive for Weather Stripping and Draft Protection Foam Corner Seal (White)
- Package includes: you will get 14 pieces door corner seals, the size is 2 inch long, 1.75 inch wide, 7/32 inch thick.
- The self adhesive vinyl foam corner seal has a quick and simple installation.
- Nice working performance: the reliable door frame seals are proof to dust and water, can seal the corners of your door frame firmly and completely.
- Nice seal tool: adhesive corner seal pad for door gives you a fast and simple door corner installation, it has a recommended door seal compression of 25%, minimum of 10%, and maximum of 50%.
- Long lasting seal effect: this polyethylene clad urethane foam is suitable for steel frames or classified steel covered composite, can last 3 hours for hollow metal doors, 1 - 1/2 hours for wood or plastic covered doors.
- Various fitness: these wedge corner seals pads are applicable for compression, corner seal of swing door, helping to improve energy efficiency at your house.
- Plus, the square, reversible design is easy to install within just a few minutes without other tools.
Check StockTotalBoat Clear Epoxy Primer Quart Kit
- Super-clear epoxy tie-coat primer fills the weave and seals composite layups created with cosmetic reinforcement fabrics such as carbon fiber. Stays....
- Provides maximum adhesion & improved durability for clear urethane topcoats or varnishes..
- Two-component formula has a simple mix ratio of 1 part base to 1 part activator by volume so it's very easy to use..
- Dries fast and can be recoated with itself in as little as 1 hour at 72°—build up to 12 mils wet in 3 hours. Coverage: 175-200 sq. ft. per gallon @....
Check Stock
1 PC Tilt Cap/Gland with Seals Fit for Yamaha 200-225-250-300 HP V6 3.3L End Cap Tilt Cylinder 61A-43811-00-00
- Fitment -- Perfect Suitable for Yamaha Large V6 style 1996-2018 200 225 250 F200-F300 HPDI OX66 Four Stroke 2 Stroke and 4 Stroke used on both Old Style 4 Wires Systems & 2 Wire Systems. please attention it will Not Fit Showa Style Units and Yamaha V8..
- Replacement -- Alternative to Part # 61A-43811-00-00 of function and performance..
- Material -- Made from top quality Aircraft Grade Aluminum and Viton & High Grade Urethane Seals. Hard Anodized for anti-wear, rust resistance, anti-oxidation and the End Cap/Gland is Using A Military Grade Type 3 Hard Coating for professional level reliability and durability..
- Package Includes -- 1 PCS Tilt Cap/Gland with Seals..
- Satisfaction Guarantee -- Yoursme committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty..
Check Stock
E-outstanding 5PCS PG9 Wire Range Metal Waterproof Connector Fastener Locknut Stuffing Cable Gland, 4-8mm
- ✅【WIDE APPLICATION】 Fits for Yamaha Large V6 style 1996-2018 200 225 250 F200-F300 HPDI OX66 Four Stroke 2 Stroke and 4 Stroke used on both Old Style 4 Wires Systems & 2 Wire Systems. Does not fit Showa Style Units and Yamaha V8..
- ✅【SUPERIOR MATERIAL】Made of top quality aircraft grade aluminum and viton & high grade urethane seals for good sealing performance, weather resistance and aging resistance. Hard anodized finish for anti-wear, rust resistance, anti-oxidation..
- ✅【DIRECT REPLACEMENT】Manufactured to meet OEM specification. Alternatives to Part # 61A-43811-00-00. Package includes1pcs Tilt Cap/Gland with Seals..
- ✅【UPGRADE DESIGN】aluminum parts have the upgraded military grade type 3 hard coating (used for military weapons), featuring anti-corrosion, wear-resistance, ensure long-term use and reliable performance..
- ✅【100% SATISFACTION GUARANTEE】If you're not 100% satisfied with our items, simply return them for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in Camoo!.
Check Stock
Door Corner Seal Weatherstripping Exterior Door Frame Seal Draft Stopper Adhesive Corner Seal Pads for Weather Stripping and Draft Protection (Brown,64 Pieces)
- ...ith sufficient quantity of self-stick door corner seals, which are easy to install.
- Corner seals can block sound, wind, dust and cold in a certain, keeping your room soundproof, quiet, clean and warm.
- Reliable material: the corner seal pad for door is made of polyethylene clad urethane foam, safe and durable, heat and cold resistant, can be served with your confidence.
- It also features with strong adhesive, tightness and wind resistance, which can be stuck firmly to protect your door nicely.
- Size information: foam door corner seal measure about 2 inches in height, 1 - 11/16 inches in width and 7/32 inches in thickness.
- Satiable size and certain thickness can seal the corners of your home doors, reducing the gap on the door frame.
- Fire rating: positive pressure tested for use with listed steel frames and/or classified steel covered composite, hollow metal doors rated up to 3 hours.
- Wood and plastic covered composite doors rated up to 1 - 1/2 hours.
- Apply to: these corner weather stripping pads have dust, moisture, and draft functions and can seal the corners of your home doors, so that to prevent heat and cold air from escaping in winter and summer, reducing electricity bills, saving money and energy.
Check Stock
Door Corner Seal Weatherstripping Exterior Door Frame Seal Draft Stopper Adhesive Corner Seal Pads for Weather Stripping and Draft Protection (Black,16 Pieces)
- ...ith sufficient quantity of self-stick door corner seals, which are easy to install.
- Corner seals can block sound, wind, dust and cold in a certain, keeping your room soundproof, quiet, clean and warm.
- Reliable material: the corner seal pad for door is made of polyethylene clad urethane foam, safe and durable, heat and cold resistant, can be served with your confidence.
- It also features with strong adhesive, tightness and wind resistance, which can be stuck firmly to protect your door nicely.
- Size information: foam door corner seal measure about 2 inches in height, 1 - 11/16 inches in width and 7/32 inches in thickness.
- Satiable size and certain thickness can seal the corners of your home doors, reducing the gap on the door frame.
- Fire rating: positive pressure tested for use with listed steel frames and/or classified steel covered composite, hollow metal doors rated up to 3 hours.
- Wood and plastic covered composite doors rated up to 1 - 1/2 hours.
- Apply to: these corner weather stripping pads have dust, moisture, and draft functions and can seal the corners of your home doors, so that to prevent heat and cold air from escaping in winter and summer, reducing electricity bills, saving money and energy.
Check Stock
Grow Automotive W1370-1 Urethane Reducer Med. Gallon
- Restoration Shop / Custom Shop Medium - Urethane Reducer - XR70 is a Mid temperature Paint Reducer for 70 - 85 degrees weather - XR70 has ZERO VOC for Compliance in all Low VOC areas.
- Our premium quality Urethane Reducer is designed to be used with Restoration Shop and Custom Shop Acrylic Enamel, Acrylic Urethane, and Urethane Basecoat Automotive Paints, Primers and Clearcoat systems.
- Our Urethane Reducer may also be used to reduce the viscosity in any of Restoration Shop's urethane primers, epoxy primers and urethane clearcoats..
- XR70 Medium Teperature Urethane Reducer is Universal and may also be used to reduce the viscosity of many other Brands of urethane primers, epoxy primers and urethane clearcoats..
- Restoration Shop and Custom Shop have been providing innovative Premium Quality products you can trust to the Automotive Paint Industry since 1974. Our products are proudly Made in the U.S.A., and we formulate, manufacture, and distribute our own products throughout the USA, unlike many competitors. Our superior coating products only use the highest quality ingredients, which allows our customers to consistently achieve professional high quality results on their Painting Projects!.
Check Stock
Restoration Shop / Custom Shop - UR70 Medium Urethane Reducer (Gallon) for Automotive Paint and Industrial Paint Use - High Performance Automotive Grade
- Restoration Shop / Custom Shop Medium - Urethane Reducer - UR70 is a Mid temperature Paint Reducer for 70 - 85 degrees weather.
- Our premium quality Urethane Reducer is designed to be used with Restoration Shop and Custom Shop Acrylic Enamel, Acrylic Urethane, and Urethane Basecoat Automotive Paints, Primers and Clearcoat systems.
- Our Urethane Reducer may also be used to reduce the viscosity in any of Restoration Shop's urethane primers, epoxy primers and urethane clearcoats..
- UR70 Medium Teperature Urethane Reducer is Universal and may also be used to reduce the viscosity of many other Brands of urethane primers, epoxy primers and urethane clearcoats..
- Restoration Shop and Custom Shop have been providing innovative Premium Quality products you can trust to the Automotive Paint Industry since 1974. Our products are proudly Made in the U.S.A., and we formulate, manufacture, and distribute our own products throughout the USA, unlike many competitors. Our superior coating products only use the highest quality ingredients, which allows our customers to consistently achieve professional high quality results on their Painting Projects!.
Check Stock
SEM 62263 Olive Brown Ez Coat - 16 oz.
- ✅ WHY CHOOSE POR-15 2K URETHANE PAINT? – POR-15 2K Urethane Industrial Top Coat paints are tough, glossy, two-component coatings for use over primed or painted surfaces. When fully cured, POR-15 2K Urethane Paints are a rock-hard, chemical resistant, non-porous, and incredibly tough coating. Durable and easily cleaned, they will not crack, chip, peel, or fade with age. POR-15 2K Urethane paints will withstand even the most intensive UV environments..
- ✅ LONG LASTING BRILLIANT FINISH - These beautiful, two-component coatings are stronger than any color paint you have ever tried. The long-lasting brilliant colors will look terrific wherever you use them, and will withstand incredible abuse. You'll be amazed at how well POR-15 2K Urethane paints hold up under conditions that would quickly destroy ordinary finishes..
- ✅ APPLICATION -.Please read directions fully before proceeding so that you understand the complete POR-15 2K Urethane Part A and POR-15 2k Urethane Hardener Activator process. Surface must be clean, dry, and in sound condition. Remove all oil, dust, grease, dirt, loose rust, and other foreign material to ensure adequate adhesion. Use only with adequate ventilation..
- ✅ WHEN DO I NEED THIS? - POR-15 2K Urethane top coat paints on th....
Check Stock
POR-15 2K Urethane - Clear - 1 qt. - 2 - Part Industrial Top Coat | Durable Long-Lasting Coating
- ✅ WHY CHOOSE POR-15 2K URETHANE PAINT? – POR-15 2K Urethane Industrial Top Coat paints are tough, glossy, two-component coatings for use over primed or painted surfaces. When fully cured, POR-15 2K Urethane Paints are a rock-hard, chemical resistant, non-porous, and incredibly tough coating. Durable and easily cleaned, they will not crack, chip, peel, or fade with age. POR-15 2K Urethane paints will withstand even the most intensive UV environments..
- ✅ LONG LASTING BRILLIANT FINISH - These beautiful, two-component coatings are stronger than any color paint you have ever tried. The long-lasting brilliant colors will look terrific wherever you use them, and will withstand incredible abuse. You'll be amazed at how well POR-15 2K Urethane paints hold up under conditions that would quickly destroy ordinary finishes..
- ✅ APPLICATION -.Please read directions fully before proceeding so that you understand the complete POR-15 2K Urethane Part A and POR-15 2k Urethane Hardener Activator process. Surface must be clean, dry, and in sound condition. Remove all oil, dust, grease, dirt, loose rust, and other foreign material to ensure adequate adhesion. Use only with adequate ventilation..
- ✅ WHEN DO I NEED THIS? - POR-15 2K Urethane top coat paints on th....
Check Stock
Phoenix goods Urethane Band Saw Tires Specifically for 10" Delta 28-195, 2 Pack
- Phoenix goods Urethane Bandsaw Tires, .095" Thick, 2 Pack.
- Longer belt life – Made of Urethane, The long-lasting upgrade to rubber belts, Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw tires. Urethane band saw tires will not dry rot like rubber or plastic tires. This alone provides you with an exceptional value over other types of band saw tires.From improved performance and safety to reduced downtime..
- Fast, easy installation –no adhesive is needed for proper installation. Urethane tires are specifically designed to stay in place without any type of adhesive and can be stretched to fit. This makes them even easier to install and even easier to remove if necessary..
- Specifically for 10" Delta 28-195 Band Saw.
- The surface is specially treated, more slip resistant than others Urethane Band Saw Tire, only Phoenix goods supply, All of this improves blade tracking and extends the life of your blade. urethane tire installation process is quicker and easier for increased productivity and efficiency. And, these tires are bright orange,which makes them super easy to inspectcess is quicker and easier for increased productivity and efficiency..
Check Stock
