Categories

Best Usb C Breakout Board

Treedix Breakout Board Module with Pin Header for Teensy 3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions. The breakout board is well-made, gold-plated on both sides to prevent oxidation..
  • All pins on the breakout board are accessible, Teensy3.5 is compatible with arduino integrated development environment (IDE).
  • Simple and easy to assemble, can be used in conjunction with a breadboard, the spacing between the holes on the board: 2.54mm.
  • The breakout board module can easily extend the Teensy 3.5/3.6 project to industrial control, home automation or other applications..
  • Note: The package is not include Teensy development board and breadboard.
Check Stock

Atomic Pi Developers Kit

  • Powerful Atom quad-core processor with 2Gb ram and 16GB Flash on board.
  • Developer kit includes large breakout board and AI camera module.
  • Gigabit Ethernet, AC WiFi, Bluetooth, Hi Performance Audio, USB-2, USB-3, SD, GPIO.
  • Peripherals include 9-axis sensor, bluetooth and XMOS audio power-amp.
  • Boots Linux right out of the box. What will you make with it?.
Check Stock

Treedix 4pcs USB Type-C Breakout Board Serial Basic Breakout Female Connector Type PCB Converter Board

  • With this USB breakthrough, you will finally be able to integrate the USB-C connector into your project without soldering every tiny SMD pad.
  • This upgraded USB-C breakthrough board has powerful power, three times the power of the previous USB. The breakthrough board adds resistance to the original foundation.
  • This USB-C breakthrough board is reversible, so it also solves the general frustrating problem of USB cables.
  • This board introduces the VBUS, GND, CC1, CC2, D+ and D- pins of the USB-C connector into a 0.1" pitch connector, while providing up to 1.5A nominal power and up to 3A power, It depends on the upstream equipment.
  • Use it to replace the charging port on the astro a50 headset. It can be said to be perfect. There are positioning holes on the breakout board for easy fixation. The hole on the Type-c USB is large enough and the connector size meets the association standard..
Check Stock

C25S - Smooth Stepper Terminal Board

  • Full access to all the pins of the Smooth Stepper Board. Connects directly to the Smooth Stepper (from Warp9). The board is provided with sockets that allow the Smooth Stepper Board to be plugged directly into this board. No ribbon cables required. When using the Smooth Stepper board there is no need to use an additional power supply to power the board. It will draw power from the Smooth Stepper board. Built-in Passive Low Pass Filters for the all inputs..
  • C25 Smooth Stepper Breakout Board with push lock terminals.
Check Stock

3 Axis Stepper Motor CNC Router Kit Nema23 425oz-in 112mm Dual Shaft+CW5045 Driver 4.5A 256 microstep+400W 36V Power Supply CNC Controller Kit for Engraving Lathe Plasma Milling Drilling Machine

  • ♞【Product】3 Axis nema23 stepper motor driver controller kit.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer,....
  • ♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
  • ♞【Driver】CW5045 driver Voltage: DC 24-50V.
  • Current: rated maximum output reaches: ±4.5A.
  • ♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】400W,36V/9.7A switching power supply.
Check Stock

Treedix Breakout Board Module with Pin Board for Teensy 4.1/3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions, the circuit board is well-made, gold-plated on both sides to prevent oxidation.
  • Simple and easy to assemble, it can be used in conjunction with a breadboard, the distance between the holes on the board is 2.54mm.
  • Widely compatible: all pins on the breakout board are accessible, and can be used in conjunction with Arduino IDE and Arduino compatible hardware.
  • Use this breakout board module to easily extend Tennsy 4.1 project to industrial control, home automation or other applications.
  • Note: The package is not include teensy development board.
Check Stock

FT231X Breakout

  • Micro USB connector (cable not included).
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

Vilros BBC Micro:bit Breadboard Adapter/Expansion Board

  • Vilros BBC Micro:bit Breadboard Adapter/Expansion Board.
  • Make wiring your microbit a breeze with the T-Shaped Breakout board that conveniently plugs into your breadboard..
  • Important: Breakout Board Only-Does NOT include A BBC Microbit.
Check Stock

Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On

  • Comes assembled and ready to rock out of the box.
  • 0.1" Breakout pads with 5V, D- and D+ data lines, GND and VBAT.
  • For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells).
  • 100mA charge current, adjustable to 500mA by soldering a jumper closed.
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

Treedix Prototype Breakout Breadboard Adapter Expansion Board for BBC Micro:bit

  • This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's pins. Also, the back half of the pins are not used at all..
  • The edge connector gives access to all the important pins on the bottom edge of the micro:bit. Check the datasheet for the pin spacing and orientation. This connector is best used with a custom PCB..
  • This breakout board for edge connectors allows intermediate and advanced users to connect micro:bit to breadboards and other sensors, motors, LEDs, etc..
  • We can use it in many ways, it is highly recommended to use our breakout board.
  • Through the breakout board, we broke through all 21 GPIO, power and ground pins in the form of 0.1"..
Check Stock

6pcs CD74HC4067 CMOS 16 Channel 16 CH Digital Analog Multiplexer Breakout Module for Arduino

  • This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
  • Use the CD74HC4067 16-channel analog signal switch.
  • Analog signal input: C0-C15 16 channels..
  • IT can be used the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
  • Wide operating temperature range: -55C to 125C.
Check Stock